|
12-29-2009, 04:57 AM | #1 |
Drives: Yaris Silver Join Date: Dec 2009
Location: PR
Posts: 5
|
AMK HEADER
I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO?
|
12-29-2009, 09:06 AM | #2 |
Drives: 08 liftback 5spd Join Date: Oct 2008
Location: adirondacks, ny
Posts: 220
|
|
12-29-2009, 09:46 PM | #3 |
Drives: Yaris Silver Join Date: Dec 2009
Location: PR
Posts: 5
|
and thats looks good?
|
12-29-2009, 10:09 PM | #4 |
12-29-2009, 10:13 PM | #5 |
Find a mufflershop to drill a hole and weld a o2 bung. Its not that hard shouldnt cost you more than 50 bucks.
__________________
|
|
12-29-2009, 10:32 PM | #6 |
Drives: Yaris Silver Join Date: Dec 2009
Location: PR
Posts: 5
|
jajajaj lo q pasa es q no quiero tener el chek engine prendio siempre
|
12-29-2009, 10:36 PM | #7 |
como dice el de arriba llevalo a un muffler shop que te le anadan la tuerca para que le puedas adaptar el sensor. En la isla creo que lo hagan en todos los chop. por eso estrano la Isla tanto por los inventos que uno le puede hacer a los carros.
|
|
12-30-2009, 04:47 AM | #8 |
Drives: Yaris Silver Join Date: Dec 2009
Location: PR
Posts: 5
|
SI LO Q QUIERO SABER ES Q SI DESPUES ESO SE VE FEO TAMBN ME DIJERON Q LO DEJARA ASI Y PUSIERA EL SENSOR AL PRINCIPIO DE LA TUBERIA DESPUES DEL HEADER
|
12-30-2009, 10:01 AM | #9 |
daily driver
|
sounds like you got a header for a first gen 1nzfe for an echo or xb....they don't have an 02 sensor bung like the yaris does.....and its not likely to line up w/ the midpipe
__________________
|
12-30-2009, 07:40 PM | #10 |
Drives: Yaris Silver Join Date: Dec 2009
Location: PR
Posts: 5
|
I DONT KNOW BUT I BOUGHT THE HEADER ON EBAY AND SAID 07 + YARIS TAKE A LOOK
|
12-30-2009, 10:04 PM | #11 |
Sorry but you got what you paid for. I never really buy any car parts from ebay. Only thing i got from my yaris from ebay was fog lights and even those didnt fit right. Everything else its from reputable sources.
__________________
|
|
12-30-2009, 10:06 PM | #12 |
My friend bought a intake manifold from ebay once we had to sand down the flange where it mates to the cylinder head because it was such a horrible job. Not even a smooth flat surface. They are only mass produced cheap low quality parts which is why they are so cheap. Cheap and good are not general used in the same sentence.
__________________
|
|
01-13-2010, 11:19 AM | #13 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
man when buying off ebay you really have to do your research. A good rule of thumb, never buy performance parts off ebay. Good luck tho.
|
01-13-2010, 01:51 PM | #14 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
You have to have a bung and O2 (air/fuel) sensor on your header. If it's actually for an xB (first gen), you'll have trouble lining up the exhaust also.
Looks don't matter, the header goes behind the motor anyway. Someone should report the seller for misrepresenting that product to fit the Yaris.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
01-13-2010, 10:20 PM | #15 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
or you could file a dispute thru Paypal if you used them. One of the options for the dispute is "item did not match description" or something like that so you can file that and the seller will usually arrange a refund so he doesnt have bad marks against his ebay account.
|
01-14-2010, 01:39 PM | #16 |
Drives: 2008 Yaris hatchback Join Date: Jan 2009
Location: Mayaguez, Puerto Rico
Posts: 3
|
Le puedes soldar una tuerca con esa rosca detras del header, lo importante es que el sensor este antes del catalitico. En que pueblo estas?
|
01-20-2010, 08:38 AM | #17 |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
mhmm, i posted about this already. had a shop drill a hole and put a bung on it for the sensor. the collector doesnt fit perfectly to the midpipe like mentioned. possible leak, but ive been running it for months now without problems. made my yaris sound mean as hell though. people shit bricks when they hear it lol.
__________________
OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header |
01-20-2010, 11:16 AM | #18 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
eii lets get a vid
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DC Sports Header install and evaluation | Loren | Performance Modifications | 217 | 07-04-2017 06:40 AM |
Megan Racing header install and review with pics. | Herbicidal | Performance Modifications | 6 | 09-03-2009 08:40 AM |
Pre Hack Revival: Megan Racing Header vs Ebay Header | Sabretooth | Performance Modifications | 15 | 08-19-2009 05:26 PM |
AMK Racing Header | eii | Performance Modifications | 55 | 07-11-2009 08:22 PM |
Are We Still Stuck With the 4-1 Headers? | Sabretooth | Performance Modifications | 31 | 02-20-2009 08:57 PM |