Need a 1nzfe to build! - Toyota Yaris Forums

thatbryanguy · 11-14-2013, 11:50 AM

I'm looking for a new motor I can open up and rebuild to handle 14psi then swap into my car when it's ready. Anyone know of someone selling one? Or anyone know any good places to buy one cheap where the shipping isn't almost as much as the motor? Hoping to hear of reputable places that people have had good success buying from.

TOLMACH · 11-14-2013, 11:53 AM

ebay seems to have good deals

thatbryanguy · 11-14-2013, 11:58 AM

I checked eBay but the lowest I see is around $600 after shipping. I was hoping to find a sweet deal and get one for $400-500 so I can stay on budget buying the pistons, rods, labor etc.

KCALB SIRAY · 11-14-2013, 01:16 PM

Have YOU checked local places around you? An engine isn't something Joe Blow is going to pop in a box and send UPS for $25. You have to realize this and factor in the cost of shipping if you aren't looking locally.

cali yaris · 11-14-2013, 02:18 PM

Quote:

I checked eBay but the lowest I see is around $600 after shipping.

That sounds typical especially including shipping. Is $100 really that critical?

thatbryanguy · 11-14-2013, 03:29 PM

Yea any money for the build saved means I can do more with it sooner. I was, as stated, just looking for hopefully a reputable site that sold used engines for fairly cheap around $500 (wishfully thinking $400) I see people sell these engines for $250 locally (locally for another location, not me because I've checked) so if they can go for that low then $150-200 shipping would bring it perfectly in my price range. I know obviously it has to be crated and shipping gets pricey but shipping costs isn't what is deterring me. What I said was the costs after shipping total out higher than what I'm looking for so I don't care what it costs to ship, that's not my problem.

IllusionX · 11-14-2013, 04:00 PM

lol i had a complete engine back in 06 for 250$ had 33k km on it. I had no place to store so off to the dump it went.

fnkngrv · 11-14-2013, 04:02 PM

shoot me a PM with your zip code and I can check with my sources.

thatbryanguy · 11-14-2013, 04:07 PM

Quote:

Originally Posted by IllusionX

lol i had a complete engine back in 06 for 250$ had 33k km on it. I had no place to store so off to the dump it went.

Nooooo! Hah I didn't even think about owning this car back then. Oh well

KCALB SIRAY · 11-14-2013, 04:45 PM

Um, which country eBay listings have you checked because there are some good deals on here?
http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40

thatbryanguy · 11-15-2013, 01:51 PM

the next question for me is what engine is interchangable when it comes to the 1nzfe. is it all the same whether it came from an echo or xb or xa or whatever except for things like throttle bodies and what not? all of the well priced engines are from other cars like an xb but I dont know whether or not something is different enough to where I can't take a 1nzfe from one of those vehicles.

cali yaris · 11-15-2013, 06:52 PM

just peripheral stuff. crank pulley, throttle body, intake manifold, etc. block and head are the same.

thatbryanguy · 11-15-2013, 07:29 PM

^Awesome, good to know. Then I guess at that point I'm ok to look at any 1nzfe, no matter what it came out of. That helps make it easier to pick up a cheap one

11-14-2013, 11:50 AM	#1
thatbryanguy Drives: Yaris 3dr hatch Join Date: Jan 2012 Location: SC Posts: 116	Need a 1nzfe to build! I'm looking for a new motor I can open up and rebuild to handle 14psi then swap into my car when it's ready. Anyone know of someone selling one? Or anyone know any good places to buy one cheap where the shipping isn't almost as much as the motor? Hoping to hear of reputable places that people have had good success buying from.

11-14-2013, 01:16 PM	#4
KCALB SIRAY それを吸ってください View User's Garage Drives: black sand lb Join Date: Oct 2008 Location: Virginia Posts: 8,894	Have YOU checked local places around you? An engine isn't something Joe Blow is going to pop in a box and send UPS for $25. You have to realize this and factor in the cost of shipping if you aren't looking locally. __________________ http://lifesdailypimpslap.tumblr.com/#me My Build

11-14-2013, 04:02 PM	#8
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	shoot me a PM with your zip code and I can check with my sources. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

11-14-2013, 04:45 PM	#10
KCALB SIRAY それを吸ってください View User's Garage Drives: black sand lb Join Date: Oct 2008 Location: Virginia Posts: 8,894	Um, which country eBay listings have you checked because there are some good deals on here? http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40 __________________ http://lifesdailypimpslap.tumblr.com/#me My Build

11-15-2013, 06:52 PM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	just peripheral stuff. crank pulley, throttle body, intake manifold, etc. block and head are the same. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-14-2013, 11:53 AM	#2
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	ebay seems to have good deals

11-14-2013, 11:58 AM	#3
thatbryanguy Drives: Yaris 3dr hatch Join Date: Jan 2012 Location: SC Posts: 116	I checked eBay but the lowest I see is around $600 after shipping. I was hoping to find a sweet deal and get one for $400-500 so I can stay on budget buying the pistons, rods, labor etc.

11-14-2013, 03:29 PM	#6
thatbryanguy Drives: Yaris 3dr hatch Join Date: Jan 2012 Location: SC Posts: 116	Yea any money for the build saved means I can do more with it sooner. I was, as stated, just looking for hopefully a reputable site that sold used engines for fairly cheap around $500 (wishfully thinking $400) I see people sell these engines for $250 locally (locally for another location, not me because I've checked) so if they can go for that low then $150-200 shipping would bring it perfectly in my price range. I know obviously it has to be crated and shipping gets pricey but shipping costs isn't what is deterring me. What I said was the costs after shipping total out higher than what I'm looking for so I don't care what it costs to ship, that's not my problem.

11-14-2013, 04:00 PM	#7
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	lol i had a complete engine back in 06 for 250$ had 33k km on it. I had no place to store so off to the dump it went.

11-15-2013, 01:51 PM	#11
thatbryanguy Drives: Yaris 3dr hatch Join Date: Jan 2012 Location: SC Posts: 116	the next question for me is what engine is interchangable when it comes to the 1nzfe. is it all the same whether it came from an echo or xb or xa or whatever except for things like throttle bodies and what not? all of the well priced engines are from other cars like an xb but I dont know whether or not something is different enough to where I can't take a 1nzfe from one of those vehicles.

11-15-2013, 07:29 PM	#13
thatbryanguy Drives: Yaris 3dr hatch Join Date: Jan 2012 Location: SC Posts: 116	^Awesome, good to know. Then I guess at that point I'm ok to look at any 1nzfe, no matter what it came out of. That helps make it easier to pick up a cheap one

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacing an 1NZFE by another 1NZFE ?	jenfre	DIY / Maintenance / Service	6	02-21-2021 11:38 PM
1NZ-FE All Motor Build	burned	Performance Modifications	19	10-24-2014 10:56 AM
Do you really need the 1nzfe cluster when doing a swap?	longlivekel	DIY / Maintenance / Service	5	01-01-2014 06:22 PM
1nzfe + glanza turbo kit	alfog	Forced Induction Forum	7	03-08-2013 09:04 AM