Can the 2NZ-FE use the same performance parts than 1NZ-FE? - Toyota Yaris Forums

Centurion2200 · 05-12-2007, 08:12 PM

Hi,

My Yaris HB is 1.3 but it has the 2NZ-FE engine, it looks exactly the same as the 1NZ-FE, the difference is only on the internal cc......

For example, can i use the megan header?.... intakes, pulleys...... bolt-ons in general.....

thanks

WRBlue · 05-12-2007, 08:20 PM

Best way to find out about manifolds is to head down to your local parts store and see if they'll let you look at a 1NZ and 2NZ gasket side to side.

Same/similar gasket = same bolt pattern.

Intakes are a little easier as they are mostly chassis dependent. As long as the 2NZ TB is in the same place as the 1NZ's your fine.

ChinoCharles · 05-12-2007, 10:02 PM

Crank pulleys for the 1NZ fit the 2NZ. That is all I know.

CASTREX · 05-13-2007, 03:38 AM

Quote:

Originally Posted by WRBlue

Intakes are a little easier as they are mostly chassis dependent. As long as the 2NZ TB is in the same place as the 1NZ's your fine.

Intake won't. Is in a totally different position.

nigel · 05-13-2007, 03:02 PM

crank pulley yes, iam using it on my 1300cc 07hb

Centurion2200 · 05-14-2007, 01:05 PM

Quote:

Originally Posted by CASTREX

Intake won't. Is in a totally different position.

The intake on the 2NZ and the 1NZ is exactly in the same position.....

The 2NZ-FE isn't the same 1.3 engine from United States.....

I found in some parts websites that the exhaust gaskets are the same for both NZ's......

And the big question....... TURBO???....the zpi will work?

CASTREX · 05-14-2007, 03:36 PM

Dude, i'm not from the states. I'm just a little bit north from you.

and btw I have 2 Yarisss 2007 in my garage. A LB 1.3 2NZ and a Sedan 1.5 1NZ

So I will like to see you fit a 1.5L intake on a 1.3L

Well... at least that your are talking about the 1NZ on the old echo wich I think has a different intake position.

CASTREX · 05-14-2007, 03:42 PM

This is the intake on the 1NZ.

Do you have a picture of the 2NZ engine bay?

I don't think the turbo kit will fit on your car... (as a bolt on) at least the piping. You will also have to do a new tune for the emanage.

ZPIracing · 05-14-2007, 04:06 PM

Quote:

Originally Posted by Centurion2200

The intake on the 2NZ and the 1NZ is exactly in the same position.....

The 2NZ-FE isn't the same 1.3 engine from United States.....

I found in some parts websites that the exhaust gaskets are the same for both NZ's......

And the big question....... TURBO???....the zpi will work?

Post a pic of the engine bay. Toyota typically keeps this stuff the same so i would think it will fit with minimal mods. Not sure about the ecu the wiring would be a little different but i think the tune would be close.

Thanks.

Centurion2200 · 05-14-2007, 04:12 PM

it looks exactly the same as the pic above..... i'll post some pics as soon i get home....

Yaris here in panama have the same engine that the echos....

Vic-2NZFE · 05-14-2007, 04:38 PM

Quote:

Originally Posted by CASTREX

Intake won't. Is in a totally different position.

On old echo/yaris/vitz they were on the same position, do not know about the new one though since it has change a bunch from the 1st generation
echo/yaris/vitz .

Good luck with your find Centurion

weaponrcamry · 05-14-2007, 05:15 PM

Im pretty sure that the intake wont fit. Unless you custom make the tube, and you will have to make a MAF adapter their are different as well as the sensors.Yea toyota usually make things compatible without to much difficulty. The only reason why alot of things are the same because of their engine codes. For example

5s-3s
2jz-1jz
1MZ-3MZ

7M, 5M etc.

And the same with honda, most of their parts are compatible.
Since the yaris uses the NZ design, I would most likely say they will wit with minimal modification.

Katana · 05-26-2007, 09:01 AM

Yeap, you can use a lot of them.

05-12-2007, 08:12 PM	#1
Centurion2200 View User's Garage Drives: Yaris Hatchback 07 Join Date: Sep 2006 Location: Panama Posts: 75	Can the 2NZ-FE use the same performance parts than 1NZ-FE? Hi, My Yaris HB is 1.3 but it has the 2NZ-FE engine, it looks exactly the same as the 1NZ-FE, the difference is only on the internal cc...... For example, can i use the megan header?.... intakes, pulleys...... bolt-ons in general..... thanks

05-14-2007, 05:15 PM	#12
weaponrcamry Drives: Camry LE/Yaris Hatch 5spd Join Date: Jul 2006 Location: PA--->MD<---WV Posts: 77	Im pretty sure that the intake wont fit. Unless you custom make the tube, and you will have to make a MAF adapter their are different as well as the sensors.Yea toyota usually make things compatible without to much difficulty. The only reason why alot of things are the same because of their engine codes. For example 5s-3s 2jz-1jz 1MZ-3MZ 7M, 5M etc. And the same with honda, most of their parts are compatible. Since the yaris uses the NZ design, I would most likely say they will wit with minimal modification. __________________ \|.....Overnight.........................\| \|\| \|........Parts From Japan.............\|\|'\|";,__ \|_..._...____________======\|\|_\|_\|....,,] "(@)'(@)''''''''''''''''''''''''\|(@)(@)*** "( @)

05-26-2007, 09:01 AM	#13
Katana Drives: Yaris LB 1.3lt 06 Join Date: Aug 2006 Location: Under the hood! Posts: 1,124	Yeap, you can use a lot of them. __________________ It's not the ride, it's the rider!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
thoughts for yaris parts	turboyaris	Performance Modifications	55	06-18-2007 08:40 PM
C-ONE Performance Parts "IN STOCK"	KamiSpeed	Sponsors Classifieds Area	19	01-11-2007 05:26 AM
Quick Questions about general performance parts.	wlfpck	Performance Modifications	3	11-16-2006 10:58 PM
Performance parts	yariman	Performance Modifications	22	07-25-2006 08:27 PM
Performance parts	yariman	Performance Modifications	5	03-22-2006 04:52 PM

05-12-2007, 08:20 PM	#2
WRBlue View User's Garage Drives: Yaris 3 Door, 04 WRX, 69 Lotus Join Date: Apr 2007 Location: norcal Posts: 128	Best way to find out about manifolds is to head down to your local parts store and see if they'll let you look at a 1NZ and 2NZ gasket side to side. Same/similar gasket = same bolt pattern. Intakes are a little easier as they are mostly chassis dependent. As long as the 2NZ TB is in the same place as the 1NZ's your fine.

05-12-2007, 10:02 PM	#3
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Crank pulleys for the 1NZ fit the 2NZ. That is all I know.

05-13-2007, 03:02 PM	#5
nigel Drives: yaris Join Date: Mar 2007 Location: HK Posts: 14	crank pulley yes, iam using it on my 1300cc 07hb

05-14-2007, 03:36 PM	#7
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	Dude, i'm not from the states. I'm just a little bit north from you. and btw I have 2 Yarisss 2007 in my garage. A LB 1.3 2NZ and a Sedan 1.5 1NZ So I will like to see you fit a 1.5L intake on a 1.3L Well... at least that your are talking about the 1NZ on the old echo wich I think has a different intake position.

05-14-2007, 04:12 PM	#10
Centurion2200 View User's Garage Drives: Yaris Hatchback 07 Join Date: Sep 2006 Location: Panama Posts: 75	it looks exactly the same as the pic above..... i'll post some pics as soon i get home.... Yaris here in panama have the same engine that the echos....