Yaris Engine Swaps!!! - Page 2 - Toyota Yaris Forums

eTiMaGo · 02-08-2007, 12:23 PM

erm probably, but why would you want to swap for the same engine?

yarisTOONR82 · 02-08-2007, 12:31 PM

I am looking at buying one and rebuilding the top end. forged titanium rods, forged aluminum pistons, bore it out to 76mm (1.6L), and new head gasket to change the compression to 8.5:1. This way It will be able to handle forced induction reliably and have a little bit more displacement.

Doc Zaius · 02-08-2007, 12:42 PM

Sounds like an awesome project!!! But I'm not sure if its quite the same engine. I remember hearing something about 2 belts, whereas we have just one...? There are more qualified people than me to answer this.

cdydjded · 02-08-2007, 01:21 PM

yaristoon: do you realize what a titanium rod cost? Carrilo & Crower has rods available.

yarisTOONR82 · 02-08-2007, 09:00 PM

$1000usd for rods, pistons, head gasket, and all hardware.

yarisTOONR82 · 02-08-2007, 09:01 PM

and $650 for a use engine. (if I can find one that works.)

ChinoCharles · 02-08-2007, 09:03 PM

No power steering belt on the Yaris. Its electric... boogie woogie woogie.

eTiMaGo · 02-08-2007, 09:08 PM

Quote:

Originally Posted by ChinoCharles

No power steering belt on the Yaris. Its electric... boogie woogie woogie.

yeah but that should just be a matter of swapping a couple of pulleys

ChinoCharles · 02-08-2007, 09:11 PM

I was just stating the reason for the extra pulley on the Scions... I don't know shit about engine swaps!

If you need a steak grilled or a computer built, call me though.

cdydjded · 02-08-2007, 10:28 PM

yaristoon: sorry but you will spend $1000 on the rods alone. I sell JE pistons on eBay & I sell them for $485.00. Even Eagle rods which are the cheapest on the market cost $325.00. I think you meant billet steel rods.

spkrman · 02-08-2007, 10:32 PM

Quote:

Originally Posted by cdydjded

yaristoon: sorry but you will spend $1000 on the rods alone. I sell JE pistons on eBay & I sell them for $485.00. Even Eagle rods which are the cheapest on the market cost $325.00. I think you meant billet steel rods.

what is your ebay username, pm me :)

cdydjded · 02-08-2007, 10:35 PM

spark: per4mancefactory

Doc Zaius · 02-08-2007, 11:11 PM

Quote:

Originally Posted by yarisTOONR82

$1000usd for rods, pistons, head gasket, and all hardware.

Ya. Woah... thats pretty damn cheap! If you've actually found such a deal, lemme in on it, ok!!

Quote:

Originally Posted by ChinoCharles

I was just stating the reason for the extra pulley on the Scions... I don't know shit about engine swaps!

If you need a steak grilled or a computer built, call me though.

Hahahhahaha... awesome... I'm eating steak while setting up a dual-boot Win98/Win2k POS laptop.

ChinoCharles · 02-08-2007, 11:13 PM

Cow-munching nerds unite!

yarisTOONR82 · 02-08-2007, 11:35 PM

#17
Toyota 16V DOHC 2000-04
Engine
Code Stock
Bore Includes: Engine Kit #/Price
1NZFE 75mm Complete Gasket Set
Performance MLS Head Gasket
ROSS/Wiseco Forged Pistons
(75, 75.5, 76mm) and
(8.5, 9.0, 9.5, 10.0 comp ratio)
Plasma Moly Rings
TOGA HP Main Bearings
TOGA HP Rod Bearings
Thrust Washers EKTO41MPX
$969

Call to Order:
(603) 378-0090

yarisTOONR82 · 02-08-2007, 11:40 PM

there is an upcharge for materials cost on titanium.

Doc Zaius · 02-09-2007, 12:56 AM

oooooooooooooooooooooooooooooooooh!!!

cdydjded · 02-09-2007, 07:54 AM

Yaris: no rods on package #17, call them for the price of the Ti rods, make sure you are sitting down

02-08-2007, 12:23 PM	#19
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	erm probably, but why would you want to swap for the same engine? __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

02-08-2007, 12:42 PM	#21
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	Sounds like an awesome project!!! But I'm not sure if its quite the same engine. I remember hearing something about 2 belts, whereas we have just one...? There are more qualified people than me to answer this. __________________ 2006 Red Blitzed RS 5-door

02-09-2007, 12:56 AM	#35
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	oooooooooooooooooooooooooooooooooh!!! __________________ 2006 Red Blitzed RS 5-door

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
Yaris Engine	Christopher	General Yaris / Vitz Discussion	1	01-17-2007 03:14 AM
engine modify Yaris D-4D	uraz	Performance Modifications	10	04-30-2006 11:53 AM

02-08-2007, 12:31 PM	#20
yarisTOONR82 feed me knowledge!!! Drives: 2007 Toyota Yaris 3dr HB. Join Date: Feb 2007 Location: North Carolina Posts: 15	I am looking at buying one and rebuilding the top end. forged titanium rods, forged aluminum pistons, bore it out to 76mm (1.6L), and new head gasket to change the compression to 8.5:1. This way It will be able to handle forced induction reliably and have a little bit more displacement.

02-08-2007, 01:21 PM	#22
cdydjded Drives: Yaris LB Turbo Join Date: Aug 2006 Location: Miami FL Posts: 782	yaristoon: do you realize what a titanium rod cost? Carrilo & Crower has rods available.

02-08-2007, 09:00 PM	#23
yarisTOONR82 feed me knowledge!!! Drives: 2007 Toyota Yaris 3dr HB. Join Date: Feb 2007 Location: North Carolina Posts: 15	$1000usd for rods, pistons, head gasket, and all hardware.

02-08-2007, 09:01 PM	#24
yarisTOONR82 feed me knowledge!!! Drives: 2007 Toyota Yaris 3dr HB. Join Date: Feb 2007 Location: North Carolina Posts: 15	and $650 for a use engine. (if I can find one that works.)

02-08-2007, 09:03 PM	#25
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	No power steering belt on the Yaris. Its electric... boogie woogie woogie.

02-08-2007, 09:11 PM	#27
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	I was just stating the reason for the extra pulley on the Scions... I don't know shit about engine swaps! If you need a steak grilled or a computer built, call me though.

02-08-2007, 10:28 PM	#28
cdydjded Drives: Yaris LB Turbo Join Date: Aug 2006 Location: Miami FL Posts: 782	yaristoon: sorry but you will spend $1000 on the rods alone. I sell JE pistons on eBay & I sell them for $485.00. Even Eagle rods which are the cheapest on the market cost $325.00. I think you meant billet steel rods.

02-08-2007, 10:35 PM	#30
cdydjded Drives: Yaris LB Turbo Join Date: Aug 2006 Location: Miami FL Posts: 782	spark: per4mancefactory

02-08-2007, 11:13 PM	#32
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Cow-munching nerds unite!

02-08-2007, 11:35 PM	#33
yarisTOONR82 feed me knowledge!!! Drives: 2007 Toyota Yaris 3dr HB. Join Date: Feb 2007 Location: North Carolina Posts: 15	#17 Toyota 16V DOHC 2000-04 Engine Code Stock Bore Includes: Engine Kit #/Price 1NZFE 75mm Complete Gasket Set Performance MLS Head Gasket ROSS/Wiseco Forged Pistons (75, 75.5, 76mm) and (8.5, 9.0, 9.5, 10.0 comp ratio) Plasma Moly Rings TOGA HP Main Bearings TOGA HP Rod Bearings Thrust Washers EKTO41MPX $969 Call to Order: (603) 378-0090

02-08-2007, 11:40 PM	#34
yarisTOONR82 feed me knowledge!!! Drives: 2007 Toyota Yaris 3dr HB. Join Date: Feb 2007 Location: North Carolina Posts: 15	there is an upcharge for materials cost on titanium.

02-09-2007, 07:54 AM	#36
cdydjded Drives: Yaris LB Turbo Join Date: Aug 2006 Location: Miami FL Posts: 782	Yaris: no rods on package #17, call them for the price of the Ti rods, make sure you are sitting down