Zage Turbo Kit Install - Toyota Yaris - Page 6 - Toyota Yaris Forums

Focus_Sh1ft · 07-20-2011, 05:47 PM

Guide updated.

I re-plumbed my coolant lines today. Originally I had them in parallel, but I changed them to series instead.

Pur_Blu · 07-21-2011, 01:37 AM

Have u had a chance to get your car on the dyno to check the numbers?? Even with your current tuning. Im curious to see what kinda numbers the kit puts out. Glad to see you've gone boosted for so long now with no major problems if at all

Focus_Sh1ft · 07-21-2011, 11:17 PM

Quote:

Originally Posted by Pur_Blu

Have u had a chance to get your car on the dyno to check the numbers?? Even with your current tuning. Im curious to see what kinda numbers the kit puts out. Glad to see you've gone boosted for so long now with no major problems if at all

I haven't dynoed nor do I have plans to. PETERPOOP got 175/175 with meth injection on a manual, though. That should give you a rough idea. I'm glad I haven't had any major problems either lol.

At this point, the only issue I still have is some sort of boost leak. I can only hit about 5 psi if I'm flooring it, and once I hit that point I can hear the air escaping somewhere... I've suspected this for awhile but dunno how to proceed.

Bluevitz-rs · 07-21-2011, 11:29 PM

Put it on a dyno and look for the leak

Focus_Sh1ft · 07-21-2011, 11:30 PM

^ Lmao... That was the first thing I thought of as soon as I hit the post button. It's actually a pretty solid idea.

Focus_Sh1ft · 10-03-2011, 01:00 PM

Brian · 10-03-2011, 01:26 PM

What happened to your downpipe? Did it break? It almost looks like it was cut.

Bluevitz-rs · 10-03-2011, 03:31 PM

Looks like the weld let go.

Yoda · 10-03-2011, 06:27 PM

Yup that happened to mine and that's when I went open downpipe. It was for me all the vibrations and the degree of the bend I had. Over time it broke.

Bluevitz-rs · 10-03-2011, 06:48 PM

The weld doesn't look like it had any penetration. Was this one a custom down pipe or is it part of the zage kit?

Focus_Sh1ft · 10-04-2011, 01:25 AM

It broke at the weld - that's why it looks like a perfect cut. Pretty annoying

Anyhoo, planning on doing some professional tuning next week. I do still suspect a vacuum leak and would also like to do ignition timing.

Otherwise I'm trying to figure out where to go from here. I'm never going to raise the boost as I need this car to be somewhat reliable. Currently I'm thinking of actually switching to a top mount intercooler(+functional hood scoop) and maybe adding meth injection with like 75% water and 25% meth (since meth is just eh with only 8ish psi).

pimp my yaris · 10-09-2011, 06:37 PM

This down pipe is definitley repairable. You need to install a stainless mesh flex joint and have it welded in at a exhaust shop. I had one installed on my custom downpipe and never had a problem. Check the bottom of page six on my thread and there is a picture of the one I used. U can make a pressure tester to check 4boost leaks. My friend made one for his 932 hp e85 supra and found 4 boost leaks. Now he has much more torque and less lag. He used a piece of silicon hose attached to the turbo inlet that had a round piece of aluminum to block off the end. Then he installed a 3/8 air hose quick connect fitting by threading it into the aluminum block off plate. Then he used a compressor with a regulator set to 5 psi and charged the intake with the engine off. He then just listened for all the spots where the air leaked out. He could not believe all the leaks he found. He is running 32 psi of boost now with no leaks. He also said all the hose clamps with a T-bolt were leaking. Now he installed screw type hose clamps and they are holding good. Hope this helps.

A-Dingo-Ate-My-Baby · 10-09-2011, 06:48 PM

worlds worst welding job

pimp my yaris · 10-09-2011, 06:59 PM

On a second look U may need to have it rewelded at the crack because its on the bend. And have the flex joint installed on the strait portion of the pipe. U can buy flex joints that are only 3-4 inches long.

Yoda · 10-09-2011, 10:17 PM

Weld it right back at the spot and the weld in some support bars. It wont break after that.

Focus_Sh1ft · 10-10-2011, 02:42 AM

Thanks guys. I literally had it repaired an hour after I posted that up lol. Obviously it's going to be a temporary solution, and I'm especially worried about that other weld joint. Definitely liking the mesh flex joint though. Next time it breaks I'll have one added.

If I had a compressor I would definitely do leak testing... Anyone know of a place that rents em out? Otherwise, I'll just have a tuner look for leaks while we're tuning.

ilikerice · 10-10-2011, 11:43 AM

A compressor is a wonderful thing to invest in. I bought mine from Harbor Frieght about 6 years ago and is still compressing 235psi weekly. If you are able to get a hold of a compressor check this thread out to make your own 5 dollar boost leak tester:

http://www.dsmtuners.com/forums/arti...your-to4e.html

DSM guys are awesome when it comes to help with turbo's for cheap. I made something like this for my crx. easy to use, easy to make

Focus_Sh1ft · 11-12-2011, 10:30 PM

So last week I took the turbo out to check for shaft play since it's been in now for a little over a year. Also had to remove a broken stem from where the downpipe mounts up. Been putting this off for awhile because taking the turbo off this car is such a god damn burden lol.

Anyway, shaft play is just dandy which I was glad to see. I've also made some progress on my ongoing boost leak battle. I believe the problem is on the exhaust side - specifically where the manifold mounts up to the block. That broken stem wasn't exactly helping either. AND it turns out when I originally reclocked the turbo I had stretched the actuator and thus put preload on the spring (oops :p). When I get time I need to check it out more.

10-03-2011, 01:26 PM	#97
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	What happened to your downpipe? Did it break? It almost looks like it was cut. __________________ http://www.cardomain.com/ride/3875996

10-09-2011, 06:48 PM	#103
A-Dingo-Ate-My-Baby Banned Drives: yaris Join Date: Jan 2011 Location: earth Posts: 364	worlds worst welding job Last edited by A-Dingo-Ate-My-Baby; 11-12-2011 at 11:53 PM.

10-10-2011, 11:43 AM	#107
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	A compressor is a wonderful thing to invest in. I bought mine from Harbor Frieght about 6 years ago and is still compressing 235psi weekly. If you are able to get a hold of a compressor check this thread out to make your own 5 dollar boost leak tester: http://www.dsmtuners.com/forums/arti...your-to4e.html DSM guys are awesome when it comes to help with turbo's for cheap. I made something like this for my crx. easy to use, easy to make __________________ -Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Turbo kits!!	djgab101	Forced Induction Forum	26	03-09-2015 03:24 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
Turbo kit Brainstorming	Gideon	Forced Induction Forum	16	04-19-2009 12:54 AM

07-20-2011, 05:47 PM	#91
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	Guide updated. I re-plumbed my coolant lines today. Originally I had them in parallel, but I changed them to series instead.

07-21-2011, 01:37 AM	#92
Pur_Blu Drives: NCVC craziest Join Date: Aug 2007 Location: East Bay, Castro Valley Posts: 174	Have u had a chance to get your car on the dyno to check the numbers?? Even with your current tuning. Im curious to see what kinda numbers the kit puts out. Glad to see you've gone boosted for so long now with no major problems if at all

07-21-2011, 11:29 PM	#94
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	Put it on a dyno and look for the leak

07-21-2011, 11:30 PM	#95
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	^ Lmao... That was the first thing I thought of as soon as I hit the post button. It's actually a pretty solid idea.

10-03-2011, 01:00 PM	#96
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875

10-03-2011, 03:31 PM	#98
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	Looks like the weld let go.

10-03-2011, 06:27 PM	#99
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	Yup that happened to mine and that's when I went open downpipe. It was for me all the vibrations and the degree of the bend I had. Over time it broke.

10-03-2011, 06:48 PM	#100
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	The weld doesn't look like it had any penetration. Was this one a custom down pipe or is it part of the zage kit?

10-04-2011, 01:25 AM	#101
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	It broke at the weld - that's why it looks like a perfect cut. Pretty annoying Anyhoo, planning on doing some professional tuning next week. I do still suspect a vacuum leak and would also like to do ignition timing. Otherwise I'm trying to figure out where to go from here. I'm never going to raise the boost as I need this car to be somewhat reliable. Currently I'm thinking of actually switching to a top mount intercooler(+functional hood scoop) and maybe adding meth injection with like 75% water and 25% meth (since meth is just eh with only 8ish psi).

10-09-2011, 06:37 PM	#102
pimp my yaris C'est la vie Drives: 2009 2 door hatchback Join Date: Aug 2009 Location: chicago Posts: 482	This down pipe is definitley repairable. You need to install a stainless mesh flex joint and have it welded in at a exhaust shop. I had one installed on my custom downpipe and never had a problem. Check the bottom of page six on my thread and there is a picture of the one I used. U can make a pressure tester to check 4boost leaks. My friend made one for his 932 hp e85 supra and found 4 boost leaks. Now he has much more torque and less lag. He used a piece of silicon hose attached to the turbo inlet that had a round piece of aluminum to block off the end. Then he installed a 3/8 air hose quick connect fitting by threading it into the aluminum block off plate. Then he used a compressor with a regulator set to 5 psi and charged the intake with the engine off. He then just listened for all the spots where the air leaked out. He could not believe all the leaks he found. He is running 32 psi of boost now with no leaks. He also said all the hose clamps with a T-bolt were leaking. Now he installed screw type hose clamps and they are holding good. Hope this helps.

10-09-2011, 06:59 PM	#104
pimp my yaris C'est la vie Drives: 2009 2 door hatchback Join Date: Aug 2009 Location: chicago Posts: 482	On a second look U may need to have it rewelded at the crack because its on the bend. And have the flex joint installed on the strait portion of the pipe. U can buy flex joints that are only 3-4 inches long.

10-09-2011, 10:17 PM	#105
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	Weld it right back at the spot and the weld in some support bars. It wont break after that.

10-10-2011, 02:42 AM	#106
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	Thanks guys. I literally had it repaired an hour after I posted that up lol. Obviously it's going to be a temporary solution, and I'm especially worried about that other weld joint. Definitely liking the mesh flex joint though. Next time it breaks I'll have one added. If I had a compressor I would definitely do leak testing... Anyone know of a place that rents em out? Otherwise, I'll just have a tuner look for leaks while we're tuning.

11-12-2011, 10:30 PM	#108
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	So last week I took the turbo out to check for shaft play since it's been in now for a little over a year. Also had to remove a broken stem from where the downpipe mounts up. Been putting this off for awhile because taking the turbo off this car is such a god damn burden lol. Anyway, shaft play is just dandy which I was glad to see. I've also made some progress on my ongoing boost leak battle. I believe the problem is on the exhaust side - specifically where the manifold mounts up to the block. That broken stem wasn't exactly helping either. AND it turns out when I originally reclocked the turbo I had stretched the actuator and thus put preload on the spring (oops :p). When I get time I need to check it out more.