|
04-04-2013, 11:43 AM | #1 |
Torque wrench - looking for a particular type
Ok, I have a 1/2" Husky brand (from Home Depot) torque wrench that goes from about 10-200 ft./lbs.; however, it is about 18" long and hard to get in tighter spaces where torquing nuts is still required.
I would like to get a 1/4" or 3/8" torque wrench that only goes to about 50 ft.lbs (or equivalent in/lbs), but not sure of a good U.S.A brand to get. Since this torque wrench would be used for lower torque, accuracy is more important to me. Any advice is appreciated. Pat |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 08:14 PM |
Torque wrench on lugs is critical on the Yaris | A-Dingo-Ate-My-Baby | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 3 | 12-13-2011 06:33 AM |
Torque Wrench | rossman | DIY / Maintenance / Service | 21 | 11-24-2009 01:02 PM |
Rim Weights | bosbik | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 16 | 11-14-2009 06:42 PM |
**CUSCO Type OS strut bars** | C2AUTOSPL | Sponsors Classifieds Area | 12 | 08-04-2006 10:35 AM |