Dash Kit for LB - Toyota Yaris Forums

binspoonal · 12-28-2006, 12:16 PM

Hi,

Where can I find a kit other than online, ebay, etc.. I'm looking for a store that has them. I've called Best Buy, Circuit City, local stereo installers and no one has them..

Thanks!

Violin · 12-28-2006, 12:45 PM

I took mine out because I went to a double DIN setup. I think I have all the pieces.

I could sell you mine for like $15 shipped if you don't mind that it has been used for about a month.

PM me if you want it.

sewid · 12-28-2006, 09:55 PM

How did you fit a double din unit in the dash? I was under the impression that the space is 1.75 DIN high?

Violin · 12-29-2006, 03:12 PM

Maybe yours is. The USDM Yaris is double DIN.

Spades · 12-30-2006, 04:16 PM

i couldnt find any dash kits for my yaris sedan (it was radio delete, no stereo to start out with) so i made my own out of aluminum...wasnt too hard, just took a cutoff wheel and some time.

eflb55 · 12-30-2006, 10:31 PM

I actually had the integrated dash setup for my yaris and ended up buying the non integrated double din radio bezel for 90 dollars. I then bought a double din kit for a single din radio and then put one of those little compartments below it for the remote/crap I have laying around.

jdubau55 · 03-11-2007, 10:19 PM

I havent put a double din in but from what I get you pull out the stock unit. Rape it of the bracket on the side. Bolt that to the new double din HU then bolt it back in. You will have a lil bit of gap on the sides but I think the top to bottom is spot on. Someone correct\verify me though.

earljail · 03-13-2007, 09:44 AM

Quote:

Originally Posted by jdubau55

I havent put a double din in but from what I get you pull out the stock unit. Rape it of the bracket on the side. Bolt that to the new double din HU then bolt it back in. You will have a lil bit of gap on the sides but I think the top to bottom is spot on. Someone correct\verify me though.

That's exactly right.

Reuse the stock bracket, which you have even if you have the radio delete cover. I found that the stock bracket had "bumps" on the inside so I used an angle grinder to sand them off. There will be gaps on both sides, but if you had the radio deleted, then you probably have a black plastic cover for the empty hole.
What I did was take the plastic cover, and cut the sides off with a hacksaw, then glued them on the inside of the radio surround panel. It isn't perfect, but it was free and no more gap.

Also, the stock bracket is much stronger than the plastic shit from Scosche. We had one of their kits in our Echo, and we were rear ended.(it was written off) The deck popped out on impact. Good thing I didn't have the screen out!

earljail · 03-13-2007, 05:10 PM

Here- the first pic is how large the gaps will be. Yes, I know that the trim piece is upside down.

The second one is with the "hole-fillers" I custom made for $0.

12-28-2006, 12:16 PM	#1
binspoonal Drives: Black LB Join Date: Nov 2006 Location: Rochester Posts: 12	Dash Kit for LB Hi, Where can I find a kit other than online, ebay, etc.. I'm looking for a store that has them. I've called Best Buy, Circuit City, local stereo installers and no one has them.. Thanks!

12-30-2006, 04:16 PM	#5
Spades The Hated One View User's Garage Drives: 07 White Manual Sedan Join Date: Sep 2006 Location: Oregon,USA Posts: 390	i couldnt find any dash kits for my yaris sedan (it was radio delete, no stereo to start out with) so i made my own out of aluminum...wasnt too hard, just took a cutoff wheel and some time. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dash Kit - No Mods	barryware	In Car Entertainment + Electronics (audio / video / alarm)	8	09-14-2014 03:59 PM
Is aftermarket HID kit legal (in NJ)?	Jfoofoo	Cosmetic Modifications (Exterior/Interior)	25	03-19-2009 02:05 PM
Toyota Echo or Scion Xa/Xb for aftermarket HU receiver kit?	ceboyd	In Car Entertainment + Electronics (audio / video / alarm)	7	12-08-2006 02:13 PM
Trim/Dash Kit (for single DIN headunit) for Yaris yet?	bigsky2	In Car Entertainment + Electronics (audio / video / alarm)	46	09-01-2006 07:30 AM
Dash Kit if interested....ebay	fnkngrv	Cosmetic Modifications (Exterior/Interior)	0	07-03-2006 10:18 AM

12-28-2006, 12:45 PM	#2
Violin View User's Garage Drives: 2007 Yaris LB Auto Join Date: Jul 2006 Location: New Jersey Posts: 1,592	I took mine out because I went to a double DIN setup. I think I have all the pieces. I could sell you mine for like $15 shipped if you don't mind that it has been used for about a month. PM me if you want it.

12-28-2006, 09:55 PM	#3
sewid Aussie Yaris Nut Drives: AUSDM Yaris YRS Join Date: Dec 2006 Location: Australia Posts: 19	How did you fit a double din unit in the dash? I was under the impression that the space is 1.75 DIN high?

12-29-2006, 03:12 PM	#4
Violin View User's Garage Drives: 2007 Yaris LB Auto Join Date: Jul 2006 Location: New Jersey Posts: 1,592	Maybe yours is. The USDM Yaris is double DIN.

12-30-2006, 10:31 PM	#6
eflb55 its EF LB 55 View User's Garage Drives: Toyota Yaris 2007 Sedan (US) Join Date: Sep 2006 Location: MI, US Posts: 110	I actually had the integrated dash setup for my yaris and ended up buying the non integrated double din radio bezel for 90 dollars. I then bought a double din kit for a single din radio and then put one of those little compartments below it for the remote/crap I have laying around.

03-11-2007, 10:19 PM	#7
jdubau55 Drives: 2007 White Yaris LB 5 Spd. Join Date: Feb 2007 Location: Blacksburg, VA Posts: 451	I havent put a double din in but from what I get you pull out the stock unit. Rape it of the bracket on the side. Bolt that to the new double din HU then bolt it back in. You will have a lil bit of gap on the sides but I think the top to bottom is spot on. Someone correct\verify me though.