Build Your Own Intake PARTS - Toyota Yaris Forums

*Chris07LB* · 12-30-2006, 07:33 PM

Have a few of these pieces for anyone looking to piece together an intake for cheap.

You PVC intake building guys, here's your MAF adapter.

Tested our MAF in this, and it fit perfect. New MAF screws included. Inside diameter is 2", and filter adapter outside diameter will fit a 2 3/4" or larger aftermarket filter.

* MAF adapter
* EGR adapter
* Filter adapter
* Rubber coupler
* 2 hose clamps

$45 Shipped FedEx Ground!

acrbill · 12-30-2006, 08:15 PM

Is that pipe where the MAF sensor goes into the same size as stock? If that pipe is even slightly larger you are going to run lean since the sensor cannot read the increased volume of air.

*Chris07LB* · 12-30-2006, 08:19 PM

It is the same size. Its actually pieces from an xA intake, hacked up of course.

KSIbucky · 12-31-2006, 12:42 AM

idk maybe

*Chris07LB* · 12-31-2006, 06:47 AM

Quote:

Originally Posted by KSIbucky

idk maybe

WTF?

*Chris07LB* · 01-01-2007, 07:24 PM

BUMP

ChinoCharles · 03-06-2007, 01:09 PM

Thanks Chris, it just got here. You left out the rubber coupler and hose clamps, but I guess I'll forgive you.

*Chris07LB* · 03-06-2007, 01:17 PM

Crap.

Im sure you will manage.

ChinoCharles · 03-06-2007, 01:19 PM

No big deal... both come cheap at Summit.

I can't wait for tonight! Gonna be interesting!

esquiva · 03-07-2007, 08:24 AM

ey chris do u have anymore of these?...i assume these are same for the xb also?

*Chris07LB* · 03-07-2007, 05:00 PM

Gave away what I had to Chino..

ChinoCharles · 03-08-2007, 02:13 AM

Hey esquiva, ill send them to you when I'm done with them. Hang tight.

esquiva · 03-08-2007, 11:06 AM

cool...i have an airinx filter i wanna toy with...

[FR] Sébastien Loeb · 03-08-2007, 02:43 PM

when buliding an intake with many pieces and tubes combain together, the air flow will not flow as free as an intake that is build with just one or two tubes together such as most of the aftermarket intake kits ( TRD, AEM, ect...) therefore you are better off getting an aftermarket intake kit to get the most air flow out of it.

esquiva · 03-08-2007, 05:18 PM

hmmm...i just needed the adapter though.......but that is a good point,sebastien

*Chris07LB* · 03-08-2007, 07:06 PM

these parts where being used for mock up.. once everything is set the way they want it, im sure its all going to become one nice complete piece.

12-30-2006, 08:15 PM	#2
acrbill Drives: Polar White Hatch Join Date: Nov 2006 Location: chicago Posts: 407	Is that pipe where the MAF sensor goes into the same size as stock? If that pipe is even slightly larger you are going to run lean since the sensor cannot read the increased volume of air. __________________ ChinoCharles Intake supporter.

12-31-2006, 12:42 AM	#4
KSIbucky View User's Garage Drives: 2007 Yaris manual dark silver Join Date: May 2006 Location: Fond du Lac, WI Posts: 694	idk maybe __________________ 7 Color Tach Fujita Intake Momo pedals Shift knob and boot. Full TRD SSK. Blitz exhaust Megan Lowering Springs (Next is DC Header)

03-07-2007, 08:24 AM	#10
esquiva Noypi ako! View User's Garage Drives: 07 S Sedan 5-Speed M/T Join Date: Aug 2006 Location: South Cali Posts: 226	ey chris do u have anymore of these?...i assume these are same for the xb also? __________________ Nagka-anak sina boy at nene, isang lalaki at isang babae. binata't dalaga na sila... Nene jr.: tay, peram naman ng kotse o... Boy Bastos: sige pero isang kondisyon. mag-ano muna tayo. Nene jr.: tay meron ako ngayon e. blowjob na lang kita. Boy bastos: o sige. pagkatapos ng blowjob... Nene jr.: tay, bat lasang tae yung etits nyo? Boy bastos: ah ganon ba? hiniram kasi ng kuya mo kanina yung kotse e!

03-08-2007, 11:06 AM	#13
esquiva Noypi ako! View User's Garage Drives: 07 S Sedan 5-Speed M/T Join Date: Aug 2006 Location: South Cali Posts: 226	cool...i have an airinx filter i wanna toy with... __________________ Nagka-anak sina boy at nene, isang lalaki at isang babae. binata't dalaga na sila... Nene jr.: tay, peram naman ng kotse o... Boy Bastos: sige pero isang kondisyon. mag-ano muna tayo. Nene jr.: tay meron ako ngayon e. blowjob na lang kita. Boy bastos: o sige. pagkatapos ng blowjob... Nene jr.: tay, bat lasang tae yung etits nyo? Boy bastos: ah ganon ba? hiniram kasi ng kuya mo kanina yung kotse e!

03-08-2007, 02:43 PM	#14
[FR] Sébastien Loeb www.sebastienloeb.com Drives: Citroën C4 & TOYOTA Yaris Join Date: Feb 2007 Location: Switzerland Posts: 36	when buliding an intake with many pieces and tubes combain together, the air flow will not flow as free as an intake that is build with just one or two tubes together such as most of the aftermarket intake kits ( TRD, AEM, ect...) therefore you are better off getting an aftermarket intake kit to get the most air flow out of it. __________________ http://www.sebastienloeb.com/

12-30-2006, 08:19 PM	#3
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	It is the same size. Its actually pieces from an xA intake, hacked up of course.

01-01-2007, 07:24 PM	#6
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	BUMP

03-06-2007, 01:09 PM	#7
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Thanks Chris, it just got here. You left out the rubber coupler and hose clamps, but I guess I'll forgive you.

03-06-2007, 01:17 PM	#8
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Crap. Im sure you will manage.

03-06-2007, 01:19 PM	#9
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	No big deal... both come cheap at Summit. I can't wait for tonight! Gonna be interesting!

03-07-2007, 05:00 PM	#11
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Gave away what I had to Chino..

03-08-2007, 02:13 AM	#12
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Hey esquiva, ill send them to you when I'm done with them. Hang tight.

03-08-2007, 05:18 PM	#15
esquiva Noypi ako! View User's Garage Drives: 07 S Sedan 5-Speed M/T Join Date: Aug 2006 Location: South Cali Posts: 226	hmmm...i just needed the adapter though.......but that is a good point,sebastien __________________ Nagka-anak sina boy at nene, isang lalaki at isang babae. binata't dalaga na sila... Nene jr.: tay, peram naman ng kotse o... Boy Bastos: sige pero isang kondisyon. mag-ano muna tayo. Nene jr.: tay meron ako ngayon e. blowjob na lang kita. Boy bastos: o sige. pagkatapos ng blowjob... Nene jr.: tay, bat lasang tae yung etits nyo? Boy bastos: ah ganon ba? hiniram kasi ng kuya mo kanina yung kotse e!

03-08-2007, 07:06 PM	#16
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	these parts where being used for mock up.. once everything is set the way they want it, im sure its all going to become one nice complete piece.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber parts	chino_potato	Cosmetic Modifications (Exterior/Interior)	42	08-18-2007 12:49 PM
WR Secret Weapon Intake Dyno Tested..	WRLEO	Performance Modifications	70	05-17-2007 03:00 PM
question about parts to be fitted to 1.3L Auto Yaris	ASHRAF	Performance Modifications	6	12-18-2006 05:16 AM
What kind of parts you guys want?	Hyde	General Yaris / Vitz Discussion	28	09-19-2006 12:12 AM
Build Your Yaris, toyota.com	artyin	General Yaris / Vitz Discussion	3	05-03-2006 04:52 PM