bumper bracket arms for vis rs bumper - Page 5 - Toyota Yaris Forums

Innovative 1 · 07-25-2015, 09:06 AM

I had them only paint it for me. I installed the bumper myself to make sure the grill inserts and garnish was installed properly. The fender and bumper gaps were tight. Had to semi force the fit but got them to go.

beaker · 07-25-2015, 04:21 PM

Looks AWESOME!

Tells us how the factory grill parts worked with the aftermarket bumper?

Also, is that the TRD garnish between the upper and lower grill or is it just painted black?

WeeYari · 07-25-2015, 04:49 PM

By the tiny pics on my phone, that looks damn good. You must be thrilled by the transformation.

Sent from my iPhone using Tapatalk

Innovative 1 · 07-26-2015, 10:58 AM

Grill pieces are held in place by the existing tabs on new bumper. Guessing that they were part of the mold when bumper was formed by vis. They were not precise. Used some small flat washers in between a few of the tabs as a wedge to secure the grill to them. Trd garnish is authentic and came prepainted from japan gunmetal grey. Had body shop spray it same color as cowl section. Held on with pre placed 3M double sided tape and license plate bracket. First time I went to pick it up from body shop I wasn't pleased with the work they did. Told them I wasn't gonna take the car in its condition at that time. The took it back in shop and ended up cutting paint job two more times and got it right. Really thrilled on the final outcome.
Next on the list is a intercooled power enterprise supercharger and 15x7 Enkei RPF1 (Black) Wheels

beaker · 07-26-2015, 03:08 PM

Quote:

Originally Posted by Innovative 1

Grill pieces are held in place by the existing tabs on new bumper. Guessing that they were part of the mold when bumper was formed by vis. They were not precise. Used some small flat washers in between a few of the tabs as a wedge to secure the grill to them. Trd garnish is authentic and came prepainted from japan gunmetal grey. Had body shop spray it same color as cowl section. Held on with pre placed 3M double sided tape and license plate bracket. First time I went to pick it up from body shop I wasn't pleased with the work they did. Told them I wasn't gonna take the car in its condition at that time. The took it back in shop and ended up cutting paint job two more times and got it right. Really thrilled on the final outcome.
Next on the list is a intercooled power enterprise supercharger and 15x7 Enkei RPF1 (Black) Wheels

It turned out really good. I've been looking at getting a JDM bumper cover shipped from Japan for my car, but the cheapest shipping I can find is over $600.00, plus the cost of the bumper. It's good to see that the VIS turned out this well, as it will be well less than 1/2 the cost of sourcing one from Japan.

What license plate holder did you use?

Innovative 1 · 07-28-2015, 09:37 AM

Went down to car quest and got one of those universal license plate brackets. Turned out good.

Innovative 1 · 07-30-2015, 10:05 PM

Nope. I just had them paint it. I instaled it at home in the garage. Put in the grill inserts, garnish and license plate mount before I mounted it up. Had to order the shorter bumper brackets so the bumper would clear. Its sucked in more than the original bumper. The splash guard end pieces are different for the "rs" style vis bumper. There are gaps at either side. I'll have to try to find the right ones. The center piece of the splash guard bolts in the usual places.

ezhacker1 · 07-31-2015, 02:36 AM

Yup, the splash guard is nasty gap even on the real JDM.

enviri · 08-01-2015, 02:26 AM

gaps arent bad at all on 09+ jdm...

Innovative 1 · 08-02-2015, 01:21 AM

So if i get the jdm rs side pieces for front bumper there will still be a gap?

mr_robot · 11-06-2017, 10:25 PM

Quote:

Originally Posted by Innovative 1

LH Bracket: 57014-52010
RH Bracket: 57013-52010
Well I ordered the left and right brackets. Are you saying that this wont work Astroman? Read that I need the shorter brackets to move stock crash bar in an and bumper will fit.

Are these the correct part numbers for the shorter brackets?

ACKING_QC · 11-08-2017, 12:44 PM

can I ask WHERE did you found those bumpers... and those headlights... also ?! shouldn't there be 2 holes and a GAP when debadging our "trunk" please I wanna know what you did to your trunk, I want it smooth as it can be

mr_robot · 11-08-2017, 04:17 PM

I found mine on yahoo auctions Japan. Still waiting for a shipping quote.

07-25-2015, 04:49 PM	#75
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,740	By the tiny pics on my phone, that looks damn good. You must be thrilled by the transformation. Sent from my iPhone using Tapatalk __________________

07-26-2015, 10:58 AM	#76
Innovative 1 Drives: 2007 Yaris HB 5spd Join Date: Jan 2015 Location: Glendive, MT Posts: 166	Grill pieces are held in place by the existing tabs on new bumper. Guessing that they were part of the mold when bumper was formed by vis. They were not precise. Used some small flat washers in between a few of the tabs as a wedge to secure the grill to them. Trd garnish is authentic and came prepainted from japan gunmetal grey. Had body shop spray it same color as cowl section. Held on with pre placed 3M double sided tape and license plate bracket. First time I went to pick it up from body shop I wasn't pleased with the work they did. Told them I wasn't gonna take the car in its condition at that time. The took it back in shop and ended up cutting paint job two more times and got it right. Really thrilled on the final outcome. Next on the list is a intercooled power enterprise supercharger and 15x7 Enkei RPF1 (Black) Wheels Last edited by Innovative 1; 07-26-2015 at 11:19 AM.

07-31-2015, 02:36 AM	#80
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	Yup, the splash guard is nasty gap even on the real JDM. __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Micro Image Short Shift Kit DIY	jpmck03	DIY / Maintenance / Service	17	02-24-2014 07:57 AM
The MI SSK "Not a Big 'Car Guy'" Review	jpmck03	Performance Modifications	36	09-19-2013 11:41 PM
License plate bracket for '09 that doesn't require putting holes in the bumper?	BennyLava	General Yaris / Vitz Discussion	16	03-10-2013 03:08 AM
WTB: Front Bumper, Bumper Arms, Brackets and RH Radiator Arm	n.a.	Willing to Buy by private party	3	02-12-2012 01:14 PM
Thailand OEM/Aftermarket Accessories and Bodykits GB Round 2!	eTiMaGo	Items for Sale by private party	118	09-10-2007 02:10 PM

07-25-2015, 09:06 AM	#73
Innovative 1 Drives: 2007 Yaris HB 5spd Join Date: Jan 2015 Location: Glendive, MT Posts: 166	I had them only paint it for me. I installed the bumper myself to make sure the grill inserts and garnish was installed properly. The fender and bumper gaps were tight. Had to semi force the fit but got them to go.

07-25-2015, 04:21 PM	#74
beaker Drives: 07 Yaris 3 door Join Date: Feb 2013 Location: conyers ga Posts: 87	Looks AWESOME! Tells us how the factory grill parts worked with the aftermarket bumper? Also, is that the TRD garnish between the upper and lower grill or is it just painted black?

07-28-2015, 09:37 AM	#78
Innovative 1 Drives: 2007 Yaris HB 5spd Join Date: Jan 2015 Location: Glendive, MT Posts: 166	Went down to car quest and got one of those universal license plate brackets. Turned out good.

07-30-2015, 10:05 PM	#79
Innovative 1 Drives: 2007 Yaris HB 5spd Join Date: Jan 2015 Location: Glendive, MT Posts: 166	Nope. I just had them paint it. I instaled it at home in the garage. Put in the grill inserts, garnish and license plate mount before I mounted it up. Had to order the shorter bumper brackets so the bumper would clear. Its sucked in more than the original bumper. The splash guard end pieces are different for the "rs" style vis bumper. There are gaps at either side. I'll have to try to find the right ones. The center piece of the splash guard bolts in the usual places.

08-01-2015, 02:26 AM	#81
enviri View User's Garage Drives: 2010 Yaris Join Date: Oct 2008 Location: CT Posts: 1,516	gaps arent bad at all on 09+ jdm...

08-02-2015, 01:21 AM	#82
Innovative 1 Drives: 2007 Yaris HB 5spd Join Date: Jan 2015 Location: Glendive, MT Posts: 166	So if i get the jdm rs side pieces for front bumper there will still be a gap?

11-08-2017, 12:44 PM	#84
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	can I ask WHERE did you found those bumpers... and those headlights... also ?! shouldn't there be 2 holes and a GAP when debadging our "trunk" please I wanna know what you did to your trunk, I want it smooth as it can be

11-08-2017, 04:17 PM	#85
mr_robot Drives: Yaris Join Date: Oct 2017 Location: NYC Posts: 68	I found mine on yahoo auctions Japan. Still waiting for a shipping quote.