Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Third Generation Toyota Yaris Main Rooms > Third Gen Yaris General Discussion
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 10-30-2016, 05:57 AM   #19
amit87
 
Drives: MY63 Toyota Yaris 1.33SRManual
Join Date: Oct 2013
Location: UK
Posts: 8
HI Gagi.... I did try have a look yesterday and you are right... cannot use the Bluetooth telephone button. The wiring goes to the other buttons on other side of wheel before connecting to the main harness on the steering wheel.

I have measured the tactile switch which seem to be 8x8 smd tactile switch but seems hard to find too. Looks pretty easy to solder on but will either keep a look out for cheap switch with ASL or find a cheap steering wheel from breaker and unsolder a switch. I do like your DIY but I've become "as close to OEM" kind of freak hahaha.
amit87 is offline   Reply With Quote
Old 11-03-2016, 04:48 PM   #20
Alain93
 
Drives: Yaris 12
Join Date: Oct 2016
Location: Florida
Posts: 55
Ok Gagi, where did you get all these nice diagrams? I searched Google for days and cannot find any wiring diagrams for the 3rd gen.
Alain93 is offline   Reply With Quote
Old 11-03-2016, 06:06 PM   #21
Gagi
 
Gagi's Avatar
 
Drives: Yaris 1.33 vvti 2015
Join Date: Nov 2014
Location: Europe
Posts: 41
On toyota-tech.eu after registration for free account, you can buy access to various diagrams, manuals etc.
You can buy from one hour to one year. In my opinion, the best is one day subscription because you will have to learn how to scroll, search, save what you intend to.
Upon entering your VIN you will have filtered access to specific manuals and diagrams for your car.
Many of them you can save as pdf, but some you will have to save as full HTML.
So if you really want diagrams, spare one sleepless day and one more for your rest.
Gagi is offline   Reply With Quote
Old 09-23-2017, 03:30 AM   #22
laobo
 
Drives: yaris sedan 2011
Join Date: Oct 2016
Location: vietnam
Posts: 19
Dear @Gagi i have yaris 2015, whithout ccs swich and im not found (60)A58= ccs pin to add ccs. pls share me diagram if you can..
regards
laobo is offline   Reply With Quote
Old 09-23-2017, 04:52 AM   #23
Gagi
 
Gagi's Avatar
 
Drives: Yaris 1.33 vvti 2015
Join Date: Nov 2014
Location: Europe
Posts: 41
Is your car 1.33L gasoline european model?
Gagi is offline   Reply With Quote
Old 09-24-2017, 07:45 AM   #24
laobo
 
Drives: yaris sedan 2011
Join Date: Oct 2016
Location: vietnam
Posts: 19
Dear!this one 1.5l gas, thailan/vietnam model

Quote:
Originally Posted by Gagi View Post
Is your car 1.33L gasoline european model?
Dear!this one 1.5l gas, thailan/vietnam model
laobo is offline   Reply With Quote
Old 11-21-2017, 11:21 AM   #25
HDTechVideo
 
Drives: Yaris MK3 1.33L Dual VVT-i CVT
Join Date: Jun 2014
Location: Ireland
Posts: 53
Thank you @Gagi Thank you so much for helping me to fix ASL.

Thank you @CTScott for the wonderful tutorial How to connect cruise control

What I did

1. Bought cruise control stalk and ASL switch from ebay



2. Connected cruise control stalk and plug the cable


In my case Cruise control is just plug and play

3. Installed ASL switch and added a green cable from ASL and connected the other end to 2nd pin of z2 connector




* Tried ASL but unfortunately it was not working.

4. With help of Gagi found a solution to short the yellow cable that is connected to z2 connector pin 1 to black cable that is coming from cruise control stalk.

So first removed the Yellow cable from z2 connector



Then short that with black cable from cruise control that is going to z7 connector





5. ASL is working

* Before removing yellow cable for short with black cable make sure it is not connected with any cable on the connector that is located on the back side of steering wheel.



Cheers

Sent from my SM-G935F using Tapatalk
HDTechVideo is offline   Reply With Quote
Old 08-31-2018, 01:21 PM   #26
laobo
 
Drives: yaris sedan 2011
Join Date: Oct 2016
Location: vietnam
Posts: 19
Like
laobo is offline   Reply With Quote
Old 08-31-2019, 05:54 AM   #27
Umarzafar88
 
Drives: Vitz 2011 with 1NR-FE engine
Join Date: Aug 2019
Location: Pakistan
Posts: 2
I have Vitz 2011 (jdm) Gen 3 and swapped 1KR-FE 1.0 to 1NR-FE 1.33 dual vvti.
I need to install cruise and ASL.
Ecu pic is attached. it's 89661-52Q90
Need ecu pinout or CCS and ASL pin plz
As spiral cable is also need to install.

Sent from my LYA-L09 using Tapatalk
Umarzafar88 is offline   Reply With Quote
Old 10-05-2022, 04:03 PM   #28
mik23
 
Drives: yaris 2005
Join Date: Mar 2016
Location: GB
Posts: 124
All,

I have 1NRFE Engine MT NSP120 chasis, I have installed the Cruise control light didnt comeup Any help highly appreciated.

I am not sure what is not working I have clutch switch installed and assumed wiring is also installed.

https://ibb.co/dQkH984
https://ibb.co/h2JwSXf
https://ibb.co/9njjTcw
https://ibb.co/XVw0qYw
mik23 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW VitzBoy General Yaris / Vitz Discussion 7 09-20-2023 07:50 AM
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag CTScott DIY / Maintenance / Service 307 04-04-2023 03:43 AM
Cruise Control - Again! CB900F2 DIY / Maintenance / Service 47 06-17-2010 06:29 PM
2007 Yaris Pricing Info ! YarisBueller New YARIS Purchase Forum 104 06-24-2009 04:54 PM
Retro fit Cruise Control into a 2009 Yaris hatchback 42ezra Performance Modifications 1 05-02-2009 11:04 PM


All times are GMT -4. The time now is 01:29 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.