New NST Pulleys for the TS - Page 4 - Toyota Yaris Forums

lammy29 · 06-20-2009, 09:17 AM

is it jus the crank for the 1.8 or all do you do the set of 3 too?

NonStopTuning · 06-20-2009, 02:23 PM

We offer a crank pulley at the moment. We may offer a few more pieces in the future if this piece is well received.

andries · 07-25-2009, 11:42 AM

Cali Yaris send me one to Netherlands. Soon it wil fit.
When fit I write my experiences here.

andries · 08-05-2009, 01:20 AM

Quote:

Originally Posted by CASTREX

Amazing product!

Probably the best bang for the buck out there for the 2ZR-FE engine.

The NST underdrive pulley provides gains all across the rev band...

Don't buy it expecting a huge improvement... but I can tell you this is something that you can actually feel!

Other impressions:

The throttle response is improved... I love that rev matching down shifting is easier and smoother now.

For the people worried about the use of an under drive pulley...
I have a audio system, 6 speakers and use the A/C ... no problems two days of driving!!

Thanks NST!!

I agree what CASTREX wrote.

NonStopTuning · 08-11-2009, 02:31 PM

Quote:

Originally Posted by andries

I agree what CASTREX wrote.

Glad to hear it sir. Thank you for supporting NST and MI

andries · 08-11-2009, 03:36 PM

Quote:

Originally Posted by NonStopTuning

Glad to hear it sir. Thank you for supporting NST and MI

Oke, hopefully more Dutch people find your products and shops.
In any case the have your internet addresses. I put them on the forum of the Dutch Yarisclub.

NonStopTuning · 08-11-2009, 03:38 PM

Quote:

Originally Posted by andries

Oke, hopefully more Dutch people find your products and shops.
In any case the have your internet addresses. I put them on the forum of the Dutch Yarisclub.

Awesome

Thanks again!!!

NonStopTuning · 10-12-2009, 03:27 PM

Only three pieces left. After these are gone, it may be a while before we can offer any new pieces for the TS. It may be now or never for anyone who has been holding off.

shtou · 10-21-2009, 01:29 AM

Quote:

Originally Posted by NonStopTuning

Only three pieces left. After these are gone, it may be a while before we can offer any new pieces for the TS. It may be now or never for anyone who has been holding off.

how much costs?including the shipping to Romania.Does it feel some fuel economy?because the winter is coming,and my fuel consumption grows up to 11,5L/100km in the city(and drive normaly not sport)..compare to 8-9L/100km is summer..

.thanks

NonStopTuning · 10-21-2009, 02:15 AM

International shipping is available via USPS Global Priority Mail and the exact cost for each order is calculated by our online shopping cart at the time of each purchase.

Most customers see better fuel economy all year long, when using our lightweight pulleys.

Only three pieces left if anyone is interested!

shtou · 10-21-2009, 02:18 AM

Quote:

Originally Posted by NonStopTuning

International shipping is available via USPS Global Priority Mail and the exact cost for each order is calculated by our online shopping cart at the time of each purchase.

Most customers see better fuel economy all year long, when using our lightweight pulleys.

Only three pieces left if anyone is interested!

so to make an order from Europe,i must use microimage site or nonstoptuning?

NonStopTuning · 10-21-2009, 02:21 AM

Quote:

Originally Posted by shtou

so to make an order from Europe,i must use microimage site or nonstoptuning?

I'm not sure if MicroImageOnline offers international shipping at the moment. If they do, they are a great place to order our products.

NonStopTuning is also a great place to buy NonStopTuning products and offers international shipping on all items.

andries · 10-26-2009, 04:21 PM

Quote:

Originally Posted by NonStopTuning

I'm not sure if MicroImageOnline offers international shipping at the moment. If they do, they are a great place to order our products.

NonStopTuning is also a great place to buy NonStopTuning products and offers international shipping on all items.

MicroImageOnline has send the TS 1.8 pulley to me in Netherlands(europe)

In one week the postal service gif it to me at my door.

NonStopTuning · 10-26-2009, 11:00 PM

Quote:

Originally Posted by andries

MicroImageOnline has send the TS 1.8 pulley to me in Netherlands(europe)

In one week the postal service gif it to me at my door.

tcpty · 10-26-2009, 11:47 PM

Quote:

Originally Posted by NonStopTuning

Only three pieces left. After these are gone, it may be a while before we can offer any new pieces for the TS. It may be now or never for anyone who has been holding off.

OK Mike, so, I bought my pulley 2 days ago from you (including the SSK and and metal bushings) this means 2 pulleys left? Do I have a collector's item? :)

Here in Panama there are definitely very few 1.8 TS's here but I am really lucky and proud to own one. For what I can gather over the web, few performance improvements to buy...

I was looking at a supercharger kit from Bemani in Germany for the 1.8 TS (http://www.bemani.ch/Toyota_Yaris_K.htm) to make HP's more in tune with the Cooper S crowd... (hmmm it would be really nice to beat one of those straight up! :) but there is little or no info/parts... sad...

CASTREX · 10-27-2009, 09:56 AM

Quote:

Originally Posted by tcpty

OK Mike, so, I bought my pulley 2 days ago from you (including the SSK and and metal bushings) this means 2 pulleys left? Do I have a collector's item? :)

Here in Panama there are definitely very few 1.8 TS's here but I am really lucky and proud to own one. For what I can gather over the web, few performance improvements to buy...

I was looking at a supercharger kit from Bemani in Germany for the 1.8 TS (http://www.bemani.ch/Toyota_Yaris_K.htm) to make HP's more in tune with the Cooper S crowd... (hmmm it would be really nice to beat one of those straight up! :) but there is little or no info/parts... sad...

Welcome mi Pana!!

The Bemani Kompressor is super expensive... Is over $10K I believe.

Right now I'm in the process of customizing a Turbo for my TS. Is cheaper and easier...

tcpty · 11-03-2009, 04:19 PM

Quote:

Originally Posted by CASTREX

Welcome mi Pana!!

The Bemani Kompressor is super expensive... Is over $10K I believe.

Right now I'm in the process of customizing a Turbo for my TS. Is cheaper and easier...

What? $10K?? Ok, maybe not

The problem with Turbos is that the most important part is really not hardware, but the software! The tuner HAS to dial that baby right to make the most

I will sacrifice a quart of oil to the gods of speed for you !!!

06-20-2009, 02:23 PM	#56
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	We offer a crank pulley at the moment. We may offer a few more pieces in the future if this piece is well received. __________________ MIKE @ NST www.NonStopTuning.com

10-12-2009, 03:27 PM	#62
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	Only three pieces left. After these are gone, it may be a while before we can offer any new pieces for the TS. It may be now or never for anyone who has been holding off. __________________ MIKE @ NST www.NonStopTuning.com

10-21-2009, 02:15 AM	#64
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	International shipping is available via USPS Global Priority Mail and the exact cost for each order is calculated by our online shopping cart at the time of each purchase. Most customers see better fuel economy all year long, when using our lightweight pulleys. Only three pieces left if anyone is interested! __________________ MIKE @ NST www.NonStopTuning.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NST NonStopTuning Pulley Kits	NonStopTuning	NonStopTuning	19	11-08-2014 10:23 PM
NST (NonStopTuning) Pulleys. Info, Specs, User Data...	NonStopTuning	Performance Modifications	636	12-13-2013 09:47 PM
Drift Yaris + NST Pulleys = :)	thefoth	Performance Modifications	20	11-20-2008 09:03 PM
NST Pulleys	hatchbackkid82	Performance Modifications	15	09-29-2007 08:04 PM
NEW GROUP BUY: NST WP-Lite & ALT-Lite Pulley Kit (NonStopTuning)	NonStopTuning	NonStopTuning	266	09-29-2007 02:51 AM

06-20-2009, 09:17 AM	#55
lammy29 Drives: Yaris Join Date: Oct 2008 Location: Nottingham, UK Posts: 237	is it jus the crank for the 1.8 or all do you do the set of 3 too?

07-25-2009, 11:42 AM	#57
andries aka Jack Wolfskin Drives: Yaris Join Date: Oct 2008 Location: Spain Posts: 239	Cali Yaris send me one to Netherlands. Soon it wil fit. When fit I write my experiences here.