LUG NUTS - Toyota Yaris Forums

elmo · 04-29-2009, 06:48 AM

OK, what brand of lug nuts should i buy, are "Gorilla" lug nuts good ?? also what size 12x1.5 or 12x1.25 thread pitch

thanks

elmo · 04-30-2009, 06:54 AM

guess nobody wants to talk with me, that's OK i found the info i was asking for :(

Grandieri · 04-30-2009, 11:56 AM

12x1.5 sorry i was too late.

Ryu · 04-30-2009, 11:31 PM

I got Gorilla lug nut myself, I suppose they are quite good but it shows a bit of rusting inside the lug nut after about 1.5 years of use.

However on the instruction of the package:

" Remove on lug nut from each wheel. Clean studs with a wire brush if any rust is present"

jinxor · 04-30-2009, 11:33 PM

If you got the money, get the Rays long nuts ...

severous01 · 04-30-2009, 11:36 PM

i like mcgard. gold, black, blue, red, green, white, and the colored ones come with a nylon or whatever coated key...no other company i know of comes with anything other than metal. metal on metal equals rust or chips....

any way, no impact on special lugs equals good lifetime of lugs.

elmo · 05-01-2009, 06:24 AM

THANKS FOLKS !

Damn those Rays are expensive !!!!!

Tamago · 05-01-2009, 06:27 AM

Quote:

Originally Posted by elmo

THANKS FOLKS !

Damn those Rays are expensive !!!!!

http://www.evasivemotorsports.com/Me...&Store_Code=EM

lol

Tamago · 05-01-2009, 06:31 AM

check out www.949racing.com they have some good nuts.....

or the most exhaustive listing i've ever seen:

http://www.evasivemotorsports.com/Me...tegory_Code=L1

04-29-2009, 06:48 AM	#1
elmo WFO Drives: 2008 hb Join Date: Oct 2008 Location: E. Tennessee Posts: 190	LUG NUTS OK, what brand of lug nuts should i buy, are "Gorilla" lug nuts good ?? also what size 12x1.5 or 12x1.25 thread pitch thanks

04-30-2009, 11:31 PM	#4
Ryu View User's Garage Drives: Copper Orange Mica Yaris Join Date: Feb 2006 Location: Surrey, BC Posts: 503	I got Gorilla lug nut myself, I suppose they are quite good but it shows a bit of rusting inside the lug nut after about 1.5 years of use. However on the instruction of the package: " Remove on lug nut from each wheel. Clean studs with a wire brush if any rust is present" __________________ My Copper Orange Mica Yaris with 9.3lb Kosei K1 TS http://www.yarisworld.com/forums/showthread.php?t=10951 http://www.yarisworld.com/forums/showthread.php?t=13882 http://www.yarisworld.com/forums/sho...180#post472180

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB : lug nuts and locks for 18" trd	AlphaFox	Willing to Buy by private party	0	04-19-2009 08:04 PM
lug nuts...?	at3GG	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	03-26-2009 10:16 PM
Lug Nuts	jinxor	Cosmetic Modifications (Exterior/Interior)	16	03-25-2009 08:00 PM
Cheap Lug Nuts?	KwonSau	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	06-06-2007 12:51 AM
Lug Nuts for Konig Helium Wheels?	OK Yaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	09-19-2006 05:58 PM

04-30-2009, 06:54 AM	#2
elmo WFO Drives: 2008 hb Join Date: Oct 2008 Location: E. Tennessee Posts: 190	guess nobody wants to talk with me, that's OK i found the info i was asking for :(

04-30-2009, 11:56 AM	#3
Grandieri Drives: 2010 Matrix Join Date: Feb 2009 Location: Spokane, Wa Posts: 78	12x1.5 sorry i was too late.

04-30-2009, 11:36 PM	#6
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	i like mcgard. gold, black, blue, red, green, white, and the colored ones come with a nylon or whatever coated key...no other company i know of comes with anything other than metal. metal on metal equals rust or chips.... any way, no impact on special lugs equals good lifetime of lugs.

05-01-2009, 06:24 AM	#7
elmo WFO Drives: 2008 hb Join Date: Oct 2008 Location: E. Tennessee Posts: 190	THANKS FOLKS ! Damn those Rays are expensive !!!!!