|
03-12-2007, 12:15 PM | #1 |
Drives: 3dr Black Yaris Liftback Join Date: Oct 2006
Location: Syracuse - ish NY
Posts: 16
|
I know its been asked before..but i still don't know
I apoligize for asking, because i know its been answered, but I still don't understand how to take of the window crank to access the front speakers in my liftback. pictures would be extremely helpful, or a step by step, just make sure a not smart person could understand it.
Thanks in advance. |
03-12-2007, 01:38 PM | #2 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
You need to wedge something between the handle and that white/opaque spacer. I used a zip tie last night and it worked fine. Just work a zip tie in there and twist it around, putting pressure on the center of the crank. Eventually you'll pop the little retention clip out enough to take it out and get the handle off.
It'll take a while to get it the first time, but once you do it once it'll make more sense. |
03-12-2007, 01:48 PM | #3 |
Drives: 3dr Black Yaris Liftback Join Date: Oct 2006
Location: Syracuse - ish NY
Posts: 16
|
thanks for your help...when i read other posts i thought u had to somehow get into the door pannel and work a rag around back there...and was a bit confused....lol..
thanks again |
03-12-2007, 04:24 PM | #4 |
Heres a lil drawing. You put the rag between the handle and the door panel. This will catch that clip and push it off.
|
|
03-12-2007, 04:35 PM | #5 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
|
03-12-2007, 07:00 PM | #6 |
Honestly I could not get the rag trick to work best bet is buying the stupid tool for $7-$9
|
|
03-12-2007, 09:08 PM | #7 |
Drives: 2007 Yaris manual dark silver Join Date: May 2006
Location: Fond du Lac, WI
Posts: 694
|
how does the clip keep it on there
__________________
7 Color Tach Fujita Intake Momo pedals Shift knob and boot. Full TRD SSK. Blitz exhaust Megan Lowering Springs (Next is DC Header) |
03-12-2007, 09:33 PM | #8 |
Side profile view...Clip goes around part of the crank handle something like that to keep it from easily pulling off. Thats why you must remove the clip. Othewise, you pull the whole door panel and window regulator all out.
Im a paint master.... |
|
03-12-2007, 09:35 PM | #9 | |
Quote:
You kinda have to try to look hard behind the handle to see where the ends of the clip are then put your rag on the ends so it will push it off. If you just shove the rag behind there and go for it you might be pushing in on. Once you figure it out its a breeze. |
||
03-12-2007, 09:59 PM | #10 |
The clip ends are facing the crank, so slipping the rag between the crank and the door panel grabs the ends. Then wrap the crank axis, and pull the rag back and forth until it pops out. (mind you, when it does pop up, IT REALLY does... I had to chase it!)
|
|
03-12-2007, 11:51 PM | #11 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Yeah, don't lose that sucker.
You guys should see the inside of my car right now. The paneling is in the trunk. |
03-13-2007, 12:04 AM | #12 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
I think I figured out the problem on your drivers window...
The wiring was all wrong
__________________
|
03-13-2007, 12:18 AM | #13 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Haha, oh I had the wiring right. Somewhere between me testing it and getting the driver's side door panel back on I must have jarred a connection loose somewhere. It'll be fun following wire around my car later. Ohhhh yeah baby, real fun.
|
04-28-2007, 11:23 AM | #14 |
Drives: 2007 Blazing Blue Hatch M/T Join Date: Jan 2007
Location: Spencer, NY
Posts: 61
|
I'm not sure if this has been clearly pointed out, but the rag goes between the plastic spacer and the actual crank. After 15 minutes trying between the door and the spacer, it came to me that maybe they meant between the crank/spacer! Could just be I wasn't reading directions or wasn't getting it, but good to know! I'm in my car doing it right now, rag trick works awesome!
PS: How does it go back on? lol |
04-28-2007, 01:13 PM | #15 |
Banned
|
easiest is to use the tool, even a monkey could use it and pop off the crank in 30 seconds... that includes chuggin a beer.
on that note, I noobed it up and the clip flew into oblivion... the replcaement clips @ advance dont fit properly, sux. |
12-09-2012, 03:05 PM | #16 |
I've made a post!
Drives: 2007 Yaris Hatchback Join Date: Dec 2012
Location: Auburn, CA
Posts: 1
|
It took me about 2 seconds once I figured it out! Use a screw driver to lift the handle away from the white washer. Place the rag so the edge starts in the handle area. Pull the rag around the shaft, away from the handle. The end of the clip, which is pointed towards the handle end, will get caught and the clip will just pop out!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Anyone have Yaris air and oil filter numbers? | Yaris_Fan | DIY / Maintenance / Service | 54 | 02-11-2009 01:14 AM |
sum dude asked if my car was electric... | Blenjar | General Yaris / Vitz Discussion | 17 | 01-12-2007 10:39 PM |
How often do you get asked "is that a Yaris?" | Jfoofoo | General Yaris / Vitz Discussion | 23 | 12-14-2006 11:11 PM |
This is my buying experience | yoyoche | New YARIS Purchase Forum | 9 | 08-13-2006 08:01 PM |
How much do you think they make? | Chaad32 | New YARIS Purchase Forum | 38 | 08-05-2006 08:50 AM |