My 2011 Vitz - Page 19 - Toyota Yaris Forums

coheed · 12-11-2014, 12:48 PM

Take a picture of the bottom of the lug nut, as long as the taper of the lug nut is the same as the lug seat on the wheel is the same it should be fine.

TerenceCruz · 12-11-2014, 03:54 PM

Quote:

Originally Posted by coheed

Take a picture of the bottom of the lug nut, as long as the taper of the lug nut is the same as the lug seat on the wheel is the same it should be fine.

Okay perfect. I know the lug nuts seat nicely so everything should be good then. Thanks man!

TerenceCruz · 12-29-2014, 02:37 AM

Wheels are finally on! JNC 004 in polished finish, 16x8.5 +25 wrapped in 195/45s.

Still have some fender work to do to minimize rubbing, go -5 in the rear with camber shims, and get shorter stiffer springs to get tighter fitment. Let me know what you guys think! Thanks everyone!

ezhacker1 · 12-29-2014, 10:56 AM

Omg, that's perfect, so jealous to be low.. But that's lip destroying low lol. I'm stuck with having no way to put camber in rear with my JDM axle.

TerenceCruz · 12-29-2014, 03:19 PM

Quote:

Originally Posted by ezhacker1

Omg, that's perfect, so jealous to be low.. But that's lip destroying low lol. I'm stuck with having no way to put camber in rear with my JDM axle.

Yeah man it's definitely a little more suspect to drive now, but it's all worth it to me haha. Once I get the fender work done and get stiffer springs, I should be solid. But thanks man! And dang, you can't put camber with a JDM axle? That's unfortunate, but at least you have rear disk brakes haha.

MiSFiTx87 · 12-29-2014, 10:20 PM

wow

been waiting to see them on, worth the wait

TerenceCruz · 12-30-2014, 12:28 AM

Quote:

Originally Posted by MiSFiTx87

wow

been waiting to see them on, worth the wait

Thanks a lot man! It was so hard to be patient, but it was DEFINITELY worth the wait haha.

TerenceCruz · 12-30-2014, 02:34 AM

I also definitely want to do like a black housing in the headlights. I think it would look pretty sick.

Freestylin · 12-30-2014, 08:30 AM

Lookin' good bro!

Are you currently running the Megans? What spring rate are you running both front and rear? If you are still on 6kg/mm on the front, then from the looks of it you may run into rubbing issues when you turn or go over speed bumps.

TerenceCruz · 12-30-2014, 11:21 AM

Quote:

Originally Posted by Freestylin

Lookin' good bro!

Are you currently running the Megans? What spring rate are you running both front and rear? If you are still on 6kg/mm on the front, then from the looks of it you may run into rubbing issues when you turn or go over speed bumps.

Thanks bro!! Unfortunately i am still running the 6k/3k that came with the coils. I'll be upgrading to probably 10k/8k as soon as I can. For now I have camber bolts in the front, and I can actually do a full lock. And that's with a minor roll, so hopefully it'll clear when I get a better roll job done. I'm also waiting on a reply for some -5 camber shims.

yarisugi · 12-30-2014, 08:51 PM

More pics, sir!

TerenceCruz · 12-30-2014, 09:50 PM

Sugi where are you?! I finally have them on! Hahaha

TerenceCruz · 12-30-2014, 09:51 PM

Quote:

Originally Posted by yarisugi

More pics, sir!

WOAH I posted this before I saw your comment! Weird! Haha okay I'll upload some more! One sec

TerenceCruz · 12-30-2014, 10:13 PM

More pics! The front pokes out a bit more, I don't know why. I installed camber bolts in there (one on each side) but I don't really notice the -1.5. I'll probably add one more on each side. The front passenger side is also a little higher than the front driver side. I still gotta adjust ride height and get fenders rolled before I take it to get aligned. Right now I am saving up for -5 camber shims for the rear (which will hopefully space the rear out a little more to make it even at least), as well as 10k/8K Swift springs. These 6k/3k springs aren't going to work for me for long lol. JNC center caps are on as of right now as well. Hope you guys like the pics! Sorry for the phone quality haha.

yarisugi · 12-31-2014, 01:31 PM

Nice height TC. Looks like you'll be angling over speed bumps and sweeping up leaves on your street.

TerenceCruz · 12-31-2014, 06:41 PM

Quote:

Originally Posted by yarisugi

Nice height TC. Looks like you'll be angling over speed bumps and sweeping up leaves on your street.

Thanks Sugi! And yes I most definitely will be avoiding speedbumps for now haha. Still gotta adjust height and add camber. Rubbing is pretty bad right now haha.

TerenceCruz · 01-03-2015, 12:05 AM

Random phone pics, haha.

ezhacker1 · 01-03-2015, 03:41 AM

Yep, chrome/polished wheels look best on black cars. Have you seen Martin's new wheels?

12-11-2014, 12:48 PM	#325
coheed Drives: 08 BB LB Join Date: Dec 2008 Location: Maiden, NC Posts: 785	Take a picture of the bottom of the lug nut, as long as the taper of the lug nut is the same as the lug seat on the wheel is the same it should be fine. __________________ Too much of car culture is people taking things too seriously and not enjoying it for what it is.

12-29-2014, 02:37 AM	#327
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Wheels are finally on! JNC 004 in polished finish, 16x8.5 +25 wrapped in 195/45s. Still have some fender work to do to minimize rubbing, go -5 in the rear with camber shims, and get shorter stiffer springs to get tighter fitment. Let me know what you guys think! Thanks everyone! Last edited by TerenceCruz; 12-29-2014 at 05:27 AM.

12-29-2014, 10:56 AM	#328
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	Omg, that's perfect, so jealous to be low.. But that's lip destroying low lol. I'm stuck with having no way to put camber in rear with my JDM axle. __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

12-29-2014, 10:20 PM	#330
MiSFiTx87 Drives: CS1 Join Date: Mar 2013 Location: 661 SoCal Posts: 107	wowbeen waiting to see them on, worth the wait

12-30-2014, 08:30 AM	#333
Freestylin Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009 Location: Calgary, Alberta Posts: 371	Lookin' good bro! Are you currently running the Megans? What spring rate are you running both front and rear? If you are still on 6kg/mm on the front, then from the looks of it you may run into rubbing issues when you turn or go over speed bumps. __________________ “On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna

12-30-2014, 02:34 AM	#332
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	I also definitely want to do like a black housing in the headlights. I think it would look pretty sick.

12-30-2014, 08:51 PM	#335
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	More pics, sir!

12-30-2014, 09:50 PM	#336
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Sugi where are you?! I finally have them on! Hahaha

12-30-2014, 10:13 PM	#338
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	More pics! The front pokes out a bit more, I don't know why. I installed camber bolts in there (one on each side) but I don't really notice the -1.5. I'll probably add one more on each side. The front passenger side is also a little higher than the front driver side. I still gotta adjust ride height and get fenders rolled before I take it to get aligned. Right now I am saving up for -5 camber shims for the rear (which will hopefully space the rear out a little more to make it even at least), as well as 10k/8K Swift springs. These 6k/3k springs aren't going to work for me for long lol. JNC center caps are on as of right now as well. Hope you guys like the pics! Sorry for the phone quality haha. Last edited by TerenceCruz; 12-30-2014 at 10:30 PM.

12-31-2014, 01:31 PM	#339
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	Nice height TC. Looks like you'll be angling over speed bumps and sweeping up leaves on your street.

01-03-2015, 12:05 AM	#341
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Random phone pics, haha. Last edited by TerenceCruz; 01-03-2015 at 12:41 AM.

01-03-2015, 03:41 AM	#342
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	Yep, chrome/polished wheels look best on black cars. Have you seen Martin's new wheels? __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Vitz RS Modellista Completed Car	Vitz Rs Modellista	Photo-Video-Media Gallery	38	11-18-2014 12:25 PM
2012 Vitz from the 2011 Tokyo Auto Salon	CTScott	Third Gen Yaris General Discussion	14	02-10-2011 08:06 AM
Is UA-NCP13 1.5L Manual Trans a Vitz RS?	WesSunday	General Yaris / Vitz Discussion	1	11-28-2010 10:47 AM
Newly refreshed 2011 Toyota Corolla	Kal-El	Off-topic / Other Cars / Everything else Discussions	23	11-27-2010 12:57 PM
A German Yaris/Vitz/Echo ;)	we-to-11	Photo-Video-Media Gallery	5	06-27-2007 08:26 PM