|
08-22-2006, 06:49 PM | #1 |
Drives: 300ZX Join Date: Aug 2006
Location: IL
Posts: 14
|
Supercharger?
What is the motor size in the jdm yaris or whatever, will the supercharger kit go on the us spec yaris, will any of thos parts on the catelog go on it???
http://www.bulletproofautomotive.com...lt.php?make=31 here is the link for the stuff thanks aaron |
08-22-2006, 06:51 PM | #2 |
maintenance of momentum
|
While I think the supercharger kit will go on without too much of a fuss, I have my reservations on some of the other parts...
|
08-22-2006, 06:59 PM | #3 |
Drives: 300ZX Join Date: Aug 2006
Location: IL
Posts: 14
|
what is the liter size of the jdm yaris, why would the other parts have trouble fitting. is anyone sure. Thanks for all help
ythnak aaron |
08-22-2006, 07:06 PM | #4 | |
Drives: SW20 Join Date: Jun 2006
Location: 日本
Posts: 161
|
Quote:
1.0L 1KR-FE CVT 2WD 1.3L 2SZ-FE CVT 2WD 1.3L 2NZ-FE 4AT 4WD 1.5L 1NZ-FE CVT or 5MT 2WD |
|
08-22-2006, 07:13 PM | #5 |
Drives: icebox Join Date: Apr 2006
Location: CAN
Posts: 1,003
|
The blitz supercharger will fit on no problem, you can find more information by searching older threads about it.. other performance parts will be fine, however there are issues with some cosmetic pieces because of the different bumper types used in NA and Japan, different wiring for things like the tails... g/l if you're going ahead with the compressor.. there have been older threads which have gone over the long term feasibility of FI on the 1.5l, so buyer beware... I don't know how many have been done in the US, but I know that a toyota tech here in toronto has got it installed... he advised me that besides getting the right belts the install was pretty straight forward.. however he was having problems with the stock ecu knocking down the performance... you may have to find yourself a piggyback system... or perhaps consider the greddy kit.. it comes with the e-manage which will allow you to tinker with a lot more settings..
Good Luck!! |
08-22-2006, 09:22 PM | #6 |
Drives: 300ZX Join Date: Aug 2006
Location: IL
Posts: 14
|
thanks a lot, i was told that a bodykit would fit it? is the 5dr longer or shorter.
thanks aaron |
08-22-2006, 09:40 PM | #7 |
Drives: icebox Join Date: Apr 2006
Location: CAN
Posts: 1,003
|
It may fit, but no one has worked with a kit to test it out yet... it's still wait and see until someone pulls it off....
|
08-22-2006, 10:08 PM | #8 |
Drives: AE101 Prizm('07 Yaris 3DR TBA) Join Date: Jul 2006
Location: Rochester, NY
Posts: 55
|
I don't know the similarities between the Yaris ECU and the Scion ECU's, but I've been following a few different FI topics on Scionlife, and the xB's basically need a standalone. The ECU compensates for the E-Manage, and in some cases, resets the E-Manage. They have been having a hell of a time all around. Anyone know of any differences between the two?
__________________
Finally got a loan... going to test drive Metorite Metallic 5SPD Hatch 11/06... |
08-22-2006, 10:22 PM | #9 |
i'm not to sure about performance stuff but, i know that alot of the c-one suspension/performance bars will work.
http://www.yarisworld.com/forums/sho...ght=motorsport |
|
08-22-2006, 11:11 PM | #10 | |
Drives: icebox Join Date: Apr 2006
Location: CAN
Posts: 1,003
|
Quote:
|
|
08-22-2006, 11:44 PM | #11 |
Drives: 2007 Yaris S Join Date: May 2006
Location: Milwaukee WI
Posts: 582
|
about the body kits, they should fit, fairly easily, if you get full front and rear bumpers :)
|
08-23-2006, 12:31 PM | #12 |
I have been messing with a kit for a while, the major differences in kits that are not full bumper kits is the rear. The overall length of the Japanese spec is 120mm +/- shorter overall than NA Yaris. I fit a front lip and skirts fine, the rear is taking some work. I will be going gung-ho on it in a couple weeks when we sell our place.
|
|
08-23-2006, 05:45 PM | #13 |
Drives: 00 itr Join Date: May 2006
Location: Gardena, CA
Posts: 227
|
the majority of the parts in our catalog will work. i believe i listed in the product descriptions the parts that take extensive modification to fit.
|
08-23-2006, 08:07 PM | #14 |
Drives: 300ZX Join Date: Aug 2006
Location: IL
Posts: 14
|
Thanks a lot for all of the help. This helps a lot.
Thnaks Aaron |
08-23-2006, 08:22 PM | #15 |
Drives: icebox Join Date: Apr 2006
Location: CAN
Posts: 1,003
|
Glad we could help.. let us know what happens with the things.....
|
08-24-2006, 04:51 AM | #16 |
I think that the Rotrex company makes a supercharger that fits to our yaris.
__________________
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine mods - why bother? | RallyYaris | Performance Modifications | 143 | 12-24-2006 03:56 AM |
TRD supercharger from Scion? | RallyYaris | Performance Modifications | 57 | 07-16-2006 08:01 PM |