Post your engine bay pics!

[ricepower]

up

[minired5stby]

Heres my engine currently:



Thanx for the good pic Daddie Y

[.Kevin.]

There we go

[yougojay]

2013 Yaris L 3 Door 1NZ-FE 1.5 L

[Jerkratt]

[tamrat]

is it me or is it red everywhere???

[yougojay]

Originally Posted by tamrat

is it me or is it red everywhere???

Yes, There's some major redification going on here...

I would have preferred a white one, but considering the last vehicle was white I agreed to get the red one. Love it nonetheless!
Wished Toyota would have offered a Yellow with the 3rd generation models, I would have been all over that in a heartbeat

[fnkngrv]

Pretty close to recent.

[Rigaud]

Originally Posted by fnkngrv

Pretty close to recent.

Where could someone get a carbon valve cover like yours????? :/

[fnkngrv]

Originally Posted by Rigaud

Where could someone get a carbon valve cover like yours????? :/

I can sell you one if interested. If so PM me. I had started a thread for a group buy however no one seemed to be interested.

sent from my m-o-b-i-l-e

[tooter]

No bling. Just pulls like a tractor...

[Rigaud]

Originally Posted by fnkngrv

I can sell you one if interested. If so PM me. I had started a thread for a group buy however no one seemed to be interested.

sent from my m-o-b-i-l-e

PM sent!!!

This little car has cost me $$$$$ so far with upgraded parts, but all worth it.

[wildmongoose26]

Blitz Supercharger, GT Spec strut tower brace, custom inlet for the supercharger and custom air box.

[Exiwolfman]

Here is mine ...just painted silver :)

Sent from my XT1032 using Tapatalk

[kou]

Here is a recent shot of mine.

[Flammable]

Is there any danger to washing engine bay on a Yaris? I have read the best way is cover alternator and to spray simple green on cold engine and let it sit 10 minutes or so then gently wash with a wash mitt and car soap then rinse with a gentle mist spray from nozzle. This all sounds pretty safe and logical but looking at my engine bay there are so many nooks and crannies water can get into like under fire wall and around fender wells and wasn't sure if there is any danger on shorting anything out.

[MJZ]

Originally Posted by Flammable

Is there any danger to washing engine bay on a Yaris? I have read the best way is cover alternator and to spray simple green on cold engine and let it sit 10 minutes or so then gently wash with a wash mitt and car soap then rinse with a gentle mist spray from nozzle. This all sounds pretty safe and logical but looking at my engine bay there are so many nooks and crannies water can get into like under fire wall and around fender wells and wasn't sure if there is any danger on shorting anything out.

Good question with this car. I know I used simple green Max on my old cavalier, but the process was different, heat the engine up, spray everything down with simple green, let sit for 30 mins, wash everything off with a hose. Been wanting to clean up my engine bay, so this advice interests me.

[Flammable]

Originally Posted by MJZ

Good question with this car. I know I used simple green Max on my old cavalier, but the process was different, heat the engine up, spray everything down with simple green, let sit for 30 mins, wash everything off with a hose. Been wanting to clean up my engine bay, so this advice interests me.

Ok update, this past weekend I cleaned the engine bay on both my Yaris and Mustang. My method was to cover alt. with plastic bags and then spray simple green all over engine, firewall, fender wells ect. Let it sit for about ten minutes then took a soft brush and wash mitt with car soap and gently cleaned all the areas I could. Then used garden hose with nozzle turn to wide fan and opened just enough to get a gentle mist and rinsed everything down. Then dried it really good with a leaf blower and left hood up about a half hour longer. Started cars and no check engine lights or problems. Engine bays look like new again.