TRD Gauges - Toyota Yaris Forums

03Z33 · 08-26-2006, 10:32 AM

These just look so clean, I'm actually considering picking them up even though they're so $$$$

http://page6.auctions.yahoo.co.jp/jp/auction/f46988701

Anyone know of a more local place to pick these up?

03Z33 · 08-26-2006, 10:42 AM

There's also this fancy Blitz version of the "scanguage" pretty much has the same features...

http://page9.auctions.yahoo.co.jp/jp/auction/k33259560

ChinoCharles · 08-26-2006, 11:31 AM

How much are those? Hey vendors, add these to your lists before I go drop 100+ bucks on an autometer tach!

slvryaris · 08-26-2006, 11:49 AM

YA YA we wanna know. What all do they do and is there any other link we can use to see one other then the Japanese Yahoo???

JustAnotherAsian · 08-26-2006, 03:00 PM

that's pretty damn clean, but uhm... what are the two other gauges on the side for? or are there three tachs?

paultyler_82 · 08-26-2006, 04:00 PM

I beleive the small gauges are Water Temp and Oil Temp.

You could probably, if it came down to it, customize your own drivers side glovebox cover with some sort of gauge cluster... correct me if I'm wrong, but I don't think that one would fit a LHD Yaris.

*Chris07LB* · 08-26-2006, 07:07 PM

Im looking to copy this type of setup instead...

03Z33 · 08-26-2006, 11:02 PM

The seller just replied my email and if I'm understanding his nihongo correctly these are the details:

Tach (Center)
Water temp (right side)
Oil (left side)--- not sure if it's oil temp or oil pressure

The price is ~ $1150 US shipped ($$$$!!!)

Brand new, includes plug and play wiring (no splices needed) the cluster seems to be bonded to the US passenger side cover, but it should be able to be separated and glued/riveted to the US driver side.

Currently I have the Scanguage II installed on the steering column, and I also tried it in the center console (by the speedo as well as to the side...) The problem is that the rpm's on the scanguage don't update very quick (even in fast mode) and I find it difficult to see what's going on in all mentioned locations.

Even though the install above looks great, you would still have to look through the steering wheel to view the guages. I would really prefer to have something higher up in closer to where I'm looking and not centered on the dash...

Yaris Yaba · 08-27-2006, 01:09 AM

It looks good it made me drool at first sight especially next to that bride seat. But the price just made me stutter. Is it really worth $1150.
Hopefully there will be an aftermarket replica gauge cluster, then i can get it in dry CF.

riceboy · 08-27-2006, 01:37 AM

1150???

are you sure??? that's a lotta coin for three guages and a plastic cover that's for the wrong side

paultyler_82 · 08-27-2006, 06:48 AM

Quote:

Originally Posted by 03Z33

Tach (Center)
Water temp (right side)
Oil (left side)--- not sure if it's oil temp or oil pressure

It's Oil Temp, the max notch is 15, the TRD Oil Pressure gauge only reads up to 10

Quote:

Originally Posted by 03Z33

The price is ~ $1150 US shipped ($$$$!!!)

YOWCH! DIY the thing with your own cover for that price!

Quote:

Originally Posted by 03Z33

Even though the install above looks great, you would still have to look through the steering wheel to view the guages. I would really prefer to have something higher up in closer to where I'm looking and not centered on the dash...

If I wasnt so busy lately, I'd try to see about an A-Pillar pod solution for our cars, but until my job decides to stop working me to death, I won't be making much progress.

Boo · 08-27-2006, 08:24 AM

Quote:

Originally Posted by 03Z33

Tach (Center)
Water temp (right side)
Oil (left side)--- not sure if it's oil temp or oil pressure

The price is ~ $1150 US shipped ($$$$!!!)

Don't do that.. it sounds like a rip off.

You can buy all 3 gauges for less than $200... even if you go with Delfi, it is still much cheaper.
The price is ridiculous!!

ChinoCharles · 08-27-2006, 10:53 AM

Yeah, if you buy this and your name isn't Hyde you're insane. HAHAHA

Hyde · 08-27-2006, 02:29 PM

i didnt get pricing on those gauges yet, but they dont fit LHD cars

Yaris Yaba · 08-27-2006, 02:40 PM

Quote:

Originally Posted by Hyde

i didnt get pricing on those gauges yet, but they dont fit LHD cars

Does it come with the cover or just the cluster itself? Can't you just unscrew it and replace it on the left hand dash?

Kr0n1k · 08-27-2006, 02:43 PM

Use Autometer gauges or something like that and just make a housing out of fiberglass and paint it black. $1,150 is just plain stupid for something that won't even fit in our cars, not to mention the guy is probably trying to rip you off to begin with.

Hyde · 08-27-2006, 04:00 PM

Quote:

Originally Posted by Kr0n1k

Use Autometer gauges or something like that and just make a housing out of fiberglass and paint it black. $1,150 is just plain stupid for something that won't even fit in our cars, not to mention the guy is probably trying to rip you off to begin with.

autometer is just plain lame, i cant see why anyone want those ugly things in their car.

Hyde · 08-27-2006, 04:02 PM

btw
i'm waiting for my Blitz R-VIT i-Color. apparently, we can adjust a/f ratio with it as well. that function only works on late model toyota cars.

08-26-2006, 10:32 AM	#1
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	TRD Gauges These just look so clean, I'm actually considering picking them up even though they're so $$$$ http://page6.auctions.yahoo.co.jp/jp/auction/f46988701 Anyone know of a more local place to pick these up?

08-26-2006, 03:00 PM	#5
JustAnotherAsian now in HD Drives: not yaris! Join Date: Jul 2006 Location: milpitas / santa rosa Posts: 221	that's pretty damn clean, but uhm... what are the two other gauges on the side for? or are there three tachs? __________________

08-27-2006, 02:43 PM	#16
Kr0n1k Drives: AE101 Prizm('07 Yaris 3DR TBA) Join Date: Jul 2006 Location: Rochester, NY Posts: 55	Use Autometer gauges or something like that and just make a housing out of fiberglass and paint it black. $1,150 is just plain stupid for something that won't even fit in our cars, not to mention the guy is probably trying to rip you off to begin with. __________________ Finally got a loan... going to test drive Metorite Metallic 5SPD Hatch 11/06...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vitz RS TRD Racing	jdgriswald	General Yaris / Vitz Discussion	12	05-13-2010 02:53 AM
TRD OR Eibach...i'm confused...	hoahmaru	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	39	11-07-2008 08:25 PM
18" TRD wheels	abcando	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	25	10-10-2006 12:06 AM
Gears	bulldogs2k	Performance Modifications	17	07-26-2006 08:16 PM
Toyota's Yaris TRD	VitzBoy	General Yaris / Vitz Discussion	10	07-24-2006 08:10 PM

08-26-2006, 10:42 AM	#2
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	There's also this fancy Blitz version of the "scanguage" pretty much has the same features... http://page9.auctions.yahoo.co.jp/jp/auction/k33259560

08-26-2006, 11:31 AM	#3
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	How much are those? Hey vendors, add these to your lists before I go drop 100+ bucks on an autometer tach!

08-26-2006, 11:49 AM	#4
slvryaris View User's Garage Drives: 2007 Yaris Sedan S Join Date: May 2006 Location: Indiana Posts: 885	YA YA we wanna know. What all do they do and is there any other link we can use to see one other then the Japanese Yahoo???

08-26-2006, 04:00 PM	#6
paultyler_82 View User's Garage Drives: 07 Meteorite Metallic Yaris LB Join Date: Jul 2006 Location: USA Posts: 441	I beleive the small gauges are Water Temp and Oil Temp. You could probably, if it came down to it, customize your own drivers side glovebox cover with some sort of gauge cluster... correct me if I'm wrong, but I don't think that one would fit a LHD Yaris.

08-26-2006, 11:02 PM	#8
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	The seller just replied my email and if I'm understanding his nihongo correctly these are the details: Tach (Center) Water temp (right side) Oil (left side)--- not sure if it's oil temp or oil pressure The price is ~ $1150 US shipped ($$$$!!!) Brand new, includes plug and play wiring (no splices needed) the cluster seems to be bonded to the US passenger side cover, but it should be able to be separated and glued/riveted to the US driver side. Currently I have the Scanguage II installed on the steering column, and I also tried it in the center console (by the speedo as well as to the side...) The problem is that the rpm's on the scanguage don't update very quick (even in fast mode) and I find it difficult to see what's going on in all mentioned locations. Even though the install above looks great, you would still have to look through the steering wheel to view the guages. I would really prefer to have something higher up in closer to where I'm looking and not centered on the dash...

08-27-2006, 01:09 AM	#9
Yaris Yaba Drives: 07yaris5d Join Date: Aug 2006 Location: Thailand Posts: 61	It looks good it made me drool at first sight especially next to that bride seat. But the price just made me stutter. Is it really worth $1150. Hopefully there will be an aftermarket replica gauge cluster, then i can get it in dry CF.

08-27-2006, 01:37 AM	#10
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	1150??? are you sure??? that's a lotta coin for three guages and a plastic cover that's for the wrong side

08-27-2006, 10:53 AM	#13
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Yeah, if you buy this and your name isn't Hyde you're insane. HAHAHA

08-27-2006, 02:29 PM	#14
Hyde Drives: M3,CayenneS,SL500,550i,GT3RS Join Date: Jun 2006 Location: Vancouver Posts: 181	i didnt get pricing on those gauges yet, but they dont fit LHD cars

08-27-2006, 04:02 PM	#18
Hyde Drives: M3,CayenneS,SL500,550i,GT3RS Join Date: Jun 2006 Location: Vancouver Posts: 181	btw i'm waiting for my Blitz R-VIT i-Color. apparently, we can adjust a/f ratio with it as well. that function only works on late model toyota cars.