Limits of stock 1nzfe found once and for all. - Page 5 - Toyota Yaris Forums

Focus_Sh1ft · 05-21-2012, 12:19 AM

Great pics - can't wait to see it come together!

ilikerice · 05-21-2012, 04:47 AM

wow.. this looks like so much fun.. I need to get me a short block and build it up just for fun.. awesome pics

also thinking a 1nz would make a great water sprinkler, don't you think?

DentGuy · 05-21-2012, 08:38 AM

Talk about frustrating! Im still pissed at myself for that ring

CTScott · 05-21-2012, 09:46 AM

That's a little scary with the ring snapping that easily. Are those OEM rings, or did they come with the new pistons?

DentGuy · 05-21-2012, 11:10 AM

Quote:

Originally Posted by CTScott

That's a little scary with the ring snapping that easily. Are those OEM rings, or did they come with the new pistons?

They were the rings that came with the CP pistons. They are delicate

cali yaris · 05-21-2012, 11:42 AM

I knew about the notching, sorry I didn't post anything about that beforehand. I think you have a ring on the way, those are cast iron, so yeah they take a soft touch.

Blown_xa · 05-21-2012, 06:40 PM

The 2nd ring is like that, it is a cast material (not just on our motors, and not just CP). What ring gaps did you decide?

pimp my yaris · 05-22-2012, 11:30 PM

Quote:

Originally Posted by Blown_xa

The 2nd ring is like that, it is a cast material (not just on our motors, and not just CP). What ring gaps did you decide?

Not sure exactly what the ring gap was. I had a friend helping with the rebuild he brought a ring grinder but he said the sizing was perfect. I think they were all just a few thousandths larger then the minimum recomended gap.

These are some pics of my progression today after getting my second compression ring overnighted from CP. I am hoping tomarrow to bolt on clutch, flywheel and trans. Also get her hung in the engine compartment.

I miss my car

pimp my yaris · 05-22-2012, 11:34 PM

pics

pimp my yaris · 05-22-2012, 11:42 PM

more pics

pimp my yaris · 05-22-2012, 11:44 PM

one more

cali yaris · 05-22-2012, 11:52 PM

That's coming along great. I think I'd be too tempted by "as long as I'm in here" mods.... good on you!

pimp my yaris · 05-23-2012, 05:38 PM

Just a little tip for do it yourselfers. When tightening head bolts lay the engine on its side or it will spin like a top.

Golddeenoh · 05-23-2012, 06:22 PM

or have it in a mount so that it doesn't move either. :P I Envy your garage.

DentGuy · 05-23-2012, 09:26 PM

Surprisingly enough the ring gaps were perfect right out of the box. Ive never had that happen before with file fit rings. They were all .017"-.018" on the first compression ring and .025"-.026" on the second.

Nice work getting the thing slapped back together so quickly!!!

Blown_xa · 05-23-2012, 10:45 PM

Quote:

Originally Posted by DentGuy

Surprisingly enough the ring gaps were perfect right out of the box. Ive never had that happen before with file fit rings. They were all .017"-.018" on the first compression ring and .025"-.026" on the second.

Nice work getting the thing slapped back together so quickly!!!

I've run into that, it is rare though. Ring grinding is time consuming !

fnkngrv · 05-24-2012, 12:25 AM

Quote:

Originally Posted by cali yaris

I think I'd be too tempted by "as long as I'm in here" mods.... good on you!

Been there...doing that now!

Brian, are you planning on pushing the new motor to see where you can go with it without being sleeved?

djgab101 · 05-24-2012, 02:02 AM

Haven't posted of here in ages! Today driving in the morning my car make a crack sound and something in the engine is making a ticking noise when I drive drove it home and left it there! Once I get home I can check and see if i can find the problem! It was freezing this morning I let the car warm up coolant temp was roughly 70*c and intake tempt was 17*c I hope my internals aren't damaged

05-21-2012, 04:47 AM	#74
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	wow.. this looks like so much fun.. I need to get me a short block and build it up just for fun.. awesome pics also thinking a 1nz would make a great water sprinkler, don't you think? __________________ -Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."

05-21-2012, 09:46 AM	#76
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	That's a little scary with the ring snapping that easily. Are those OEM rings, or did they come with the new pistons? __________________

05-21-2012, 11:42 AM	#78
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I knew about the notching, sorry I didn't post anything about that beforehand. I think you have a ring on the way, those are cast iron, so yeah they take a soft touch. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

05-21-2012, 06:40 PM	#79
Blown_xa Drives: Scion xA Join Date: Oct 2009 Location: Virginia Posts: 449	The 2nd ring is like that, it is a cast material (not just on our motors, and not just CP). What ring gaps did you decide? __________________ Ptuning.com

05-22-2012, 11:52 PM	#84
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	That's coming along great. I think I'd be too tempted by "as long as I'm in here" mods.... good on you! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

05-21-2012, 12:19 AM	#73
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	Great pics - can't wait to see it come together!

05-21-2012, 08:38 AM	#75
DentGuy Drives: Supra Join Date: May 2012 Location: Algonquin Posts: 9	Talk about frustrating! Im still pissed at myself for that ring

05-23-2012, 05:38 PM	#85
pimp my yaris C'est la vie Drives: 2009 2 door hatchback Join Date: Aug 2009 Location: chicago Posts: 482	Just a little tip for do it yourselfers. When tightening head bolts lay the engine on its side or it will spin like a top.

05-23-2012, 06:22 PM	#86
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	or have it in a mount so that it doesn't move either. :P I Envy your garage.

05-23-2012, 09:26 PM	#87
DentGuy Drives: Supra Join Date: May 2012 Location: Algonquin Posts: 9	Surprisingly enough the ring gaps were perfect right out of the box. Ive never had that happen before with file fit rings. They were all .017"-.018" on the first compression ring and .025"-.026" on the second. Nice work getting the thing slapped back together so quickly!!!

05-24-2012, 02:02 AM	#90
djgab101 Drives: toyota yaris Join Date: Jan 2007 Location: australia Posts: 247	Haven't posted of here in ages! Today driving in the morning my car make a crack sound and something in the engine is making a ticking noise when I drive drove it home and left it there! Once I get home I can check and see if i can find the problem! It was freezing this morning I let the car warm up coolant temp was roughly 70c and intake tempt was 17c I hope my internals aren't damaged __________________