where is the ENgine Number? - Toyota Yaris Forums

adeal · 02-27-2009, 09:30 AM

Guyz i would like to know where is the engine number located. I have a 2005 vitz Japanese. i need to know the engine number for registration purpose. Thank You.

mikenacarato · 02-27-2009, 09:31 AM

i wanna say in the door jam on the info tags...but im probably wrong.

Tamago · 02-27-2009, 09:48 AM

under the hood you'll see a yellow sticker with info about the engine. the code will be on that sticker
http://en.wikipedia.org/wiki/Toyota_SZ_engine#1SZ-FE

mikenacarato · 02-27-2009, 09:51 AM

that tag has the ESN on it or is it just the Engine Code?

Tamago · 02-27-2009, 09:53 AM

Quote:

Originally Posted by mikenacarato

that tag has the ESN on it or is it just the Engine Code?

it's usually a vacuum diagram and will say the engine code. depends.. either way it's a 1szfe engine

mikenacarato · 02-27-2009, 09:55 AM

ah, well i think he may want the engine serial number, not the engine code. but ill let the user tell us. :) some places have to register the ESN for theft recovery, not us though.

Tamago, whats with the 6mm red line anyhow? I would love 6mm wider fenders. haha

Tamago · 02-27-2009, 10:01 AM

Quote:

Originally Posted by mikenacarato

ah, well i think he may want the engine serial number, not the engine code. but ill let the user tell us. :) some places have to register the ESN for theft recovery, not us though.

Tamago, whats with the 6mm red line anyhow? I would love 6mm wider fenders. haha

Ahhh my mistake!

and it's a kind-of parody.. the red line.. it won't be my sig for long :)

mikenacarato · 02-27-2009, 10:03 AM

haha, cool. well im gonna drive down there and you can make my fenders 6mm wider if you want...to get rid of my rubbage issue. :)

Tamago · 02-27-2009, 10:04 AM

Quote:

Originally Posted by mikenacarato

haha, cool. well im gonna drive down there and you can make my fenders 6mm wider if you want...to get rid of my rubbage issue. :)

camber will heal your rubbage issue

-1deg of camber will give you approx 5.3mm of outer sidewall-to-fender clearance on a 205-55-15

adeal · 02-27-2009, 10:27 AM

@mike
yes I need the ENGINE SERIAL NUMBER. come on guyz help me out here. its not in the doors n there is no yellow sticker either. its a Japanese model. I believe in you guyz. You guyz can do it. LOL.

Tamago · 02-27-2009, 10:39 AM

it's between cyl1 and cyl 2, on the block, just below the head, front side of the engine, behind the intake manifold. you'll need a mirror or an orthoscope

adeal · 02-27-2009, 11:18 AM

@tamago
i have a steel engine sheet covering that area in front of the engine. and right behind are the intake manifold. i did not see any more. on the engine i can see 1-KR its on the right front upper side of the engine. but that is engine type no good for me.

TheRealEnth · 02-27-2009, 11:20 AM

not sure on this... cant you check it in the vin?

Tamago · 02-27-2009, 11:26 AM

Quote:

Originally Posted by TheRealEnth

not sure on this... cant you check it in the vin?

the actual serial number of the engine is what he needs.. if the engine has been swapped out the vin and SN wouldn't match

OP, sorry, best guess i could give!

adeal · 02-27-2009, 11:35 AM

this is a Japanese model vitz imported form japan there is no vin number. thanks guyz for all your help.

IllusionX · 02-27-2009, 11:53 AM

it has to have a vin.

mikenacarato · 02-27-2009, 11:56 AM

if the vin plates were removed...try moving the passenger seat all the way back, look at the floor, if you see a plastic cover the open it up and the vin is under that as well. with the vin you can call the dealer and they can get you the ESN, but you said its imported so you may have to have someone do it for you..IE whoever imported the car.

Tamago · 02-27-2009, 11:57 AM

Quote:

Originally Posted by mikenacarato

if the vin plates were removed...try moving the passenger seat all the way back, look at the floor, if you see a plastic cover the open it up and the vin is under that as well.

it's also STAMPED to the firewall behind the wiper tray

02-27-2009, 11:20 AM	#13
TheRealEnth Beast View User's Garage Drives: 2007 Blz Blu LB Join Date: Oct 2008 Location: Miami, FL Posts: 1,365	not sure on this... cant you check it in the vin? __________________ One you've taken a yaris for a spin, there's no turning back. Its a Chao!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Intake Installation	redyaris	DIY / Maintenance / Service	53	08-23-2014 05:34 AM
FS: Used Beatrush Engine Roll Stopper	FunctionSpec	Items for Sale by private party	7	06-02-2010 01:38 PM
engine swap update	Adriaan	Canada	5	03-03-2009 06:21 PM
Info regarding Engine change.	sheraz2000	General Yaris / Vitz Discussion	5	01-08-2009 12:51 AM
The Advantages of Nitrous on an Engine	KCALB SIRAY	Performance Modifications	7	01-02-2009 10:53 AM

02-27-2009, 09:30 AM	#1
adeal Drives: VITZ 2005 1,000CC Join Date: Feb 2009 Location: Lahore Posts: 5	where is the ENgine Number? Guyz i would like to know where is the engine number located. I have a 2005 vitz Japanese. i need to know the engine number for registration purpose. Thank You.

02-27-2009, 09:31 AM	#2
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	i wanna say in the door jam on the info tags...but im probably wrong.

02-27-2009, 09:51 AM	#4
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	that tag has the ESN on it or is it just the Engine Code?

02-27-2009, 09:55 AM	#6
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	ah, well i think he may want the engine serial number, not the engine code. but ill let the user tell us. :) some places have to register the ESN for theft recovery, not us though. Tamago, whats with the 6mm red line anyhow? I would love 6mm wider fenders. haha

02-27-2009, 10:03 AM	#8
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	haha, cool. well im gonna drive down there and you can make my fenders 6mm wider if you want...to get rid of my rubbage issue. :)

02-27-2009, 10:27 AM	#10
adeal Drives: VITZ 2005 1,000CC Join Date: Feb 2009 Location: Lahore Posts: 5	@mike yes I need the ENGINE SERIAL NUMBER. come on guyz help me out here. its not in the doors n there is no yellow sticker either. its a Japanese model. I believe in you guyz. You guyz can do it. LOL.

02-27-2009, 11:18 AM	#12
adeal Drives: VITZ 2005 1,000CC Join Date: Feb 2009 Location: Lahore Posts: 5	@tamago i have a steel engine sheet covering that area in front of the engine. and right behind are the intake manifold. i did not see any more. on the engine i can see 1-KR its on the right front upper side of the engine. but that is engine type no good for me.

02-27-2009, 11:35 AM	#15
adeal Drives: VITZ 2005 1,000CC Join Date: Feb 2009 Location: Lahore Posts: 5	this is a Japanese model vitz imported form japan there is no vin number. thanks guyz for all your help.

02-27-2009, 11:53 AM	#16
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	it has to have a vin.

02-27-2009, 11:56 AM	#17
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	if the vin plates were removed...try moving the passenger seat all the way back, look at the floor, if you see a plastic cover the open it up and the vin is under that as well. with the vin you can call the dealer and they can get you the ESN, but you said its imported so you may have to have someone do it for you..IE whoever imported the car.