A weird problem !! please help me - Page 2 - Toyota Yaris Forums

jambo101 · 11-27-2009, 08:35 AM

You did dilute the coolant to 50/50 with water i hope as straight coolant does not work well,the way to get air bubbles out of the cooling system is to burp the radiator which involves running the car with radiator cap removed for about 20 minutes or until you see the thermostat open and the water starts rushing around the system,replace rad cap at this point and you wont have any air in the system.

PatrickJohnson · 11-27-2009, 03:22 PM

you need to fill the overflow. there is a line on the side of the overflow tank that indicates where the levels should be both with the engine hot and with the engine cold. It needs to be filled to that level.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
electrical problem with car need help badly!!	Adriaan	DIY / Maintenance / Service	20	05-07-2010 12:40 AM
Weird door locking problem, electrical?	davembfan	General Yaris / Vitz Discussion	19	09-30-2009 02:50 PM
Yaris 06 H/B Engine Cutting out problem..	Farenheit	General Yaris / Vitz Discussion	3	09-14-2007 01:21 PM
HELP!! HID problem	07yaris_fe	General Yaris / Vitz Discussion	2	11-20-2006 06:00 AM
Service Problem	Lizardboy	DIY / Maintenance / Service	19	10-06-2006 09:12 PM

11-27-2009, 08:35 AM	#19
jambo101 Drives: yaris 08 sedan Join Date: Oct 2008 Location: Montreal Canada Posts: 1,286	You did dilute the coolant to 50/50 with water i hope as straight coolant does not work well,the way to get air bubbles out of the cooling system is to burp the radiator which involves running the car with radiator cap removed for about 20 minutes or until you see the thermostat open and the water starts rushing around the system,replace rad cap at this point and you wont have any air in the system.

11-27-2009, 03:22 PM	#20
PatrickJohnson Drives: 2008 Yaris LB Join Date: Dec 2008 Location: Murfreesboro, TN Posts: 198	you need to fill the overflow. there is a line on the side of the overflow tank that indicates where the levels should be both with the engine hot and with the engine cold. It needs to be filled to that level.