2ZZ-GE Swapping my CDN 06 Yaris Base

[Lucas@AirLift]

Hello everyone! I thought I would start a thread to document my process of swapping a 2ZZ-GE in to my Canadian imported 2006 Yaris Base. Currently the car is running the stock 1NZ and stock C50 trans and clutch, with a Garrett GT2048 turbo running 8psi un-intercooled on E85 through a Speeduino. I finally have another car to drive to work, a 2003 Matrix XRS.. which is what made me fall in love with the 2ZZ, so the 1 ton of fun Yaris is finally going under the knife! I plan on using this car as a time attack and hpde machine so I wanna cage it and make it full race car. Currently it has full interior, running a custom set of Air Lift Performance bags, Konig Helium 15x8s and a Whiteline rear sway bar. And yeah, I know, 2ZR is much easier.. but I do not care if its easy! If it was easy, I probably would not do it Anyway I have most of an engine and trans from a 04 Matrix XRS that I scored from the local U Pull yard for $300 so it is getting a C60 along with the 2ZZ. I will try to update this as much as possible as I move forward with the build. For now, here I made you some content:

Ripping around Gingerman Raceway at West Michigan Honda Meet when it was still almost stock, engine wise:
https://youtu.be/mgwyyaAdAOk?si=ZFC4N9RwlfUnBbHt