 |
 |
|
|
12-31-2016, 02:01 PM
|
#19 |
|
I've made a post!
Drives: 06 Yaris Join Date: Feb 2015
Location: The Farm
Posts: 1
|
Torque setting for brake job
Thought this should be included here:
Caliper: 25 lb-ft, or 34 Nm Caliper bracket: 79 lb-ft, or 107 Nm Tyre lugs: 76 lb-ft, or 103 Nm |
|
|
|
04-28-2018, 12:13 PM
|
#20 |
 |
Bump from the Graveyard but for any of you lurkers, You'd want to get the brake caliper from a 0-14 Scion XD OR 9-13 Corolla LE,STD model
If you are like me and hit up junkyards more often than you call your mum... itll be useful info |
|
|
|
|
10-22-2018, 03:01 PM
|
#21 |
|
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 1,919
|
Just finished installing this setup on my car. It's actually the stuff in the pictures--bought them off Brushforhire after he totaled his. Install is super simple, barring any problems with stuck/rusted bolts. Still have to bleed the lines and refresh the brake fluid, but really looking forward to these!
|
|
|
|
|
10-23-2018, 01:38 AM
|
#22 |
|
|
Tell me how they feel, I put the bigger calipers on and while my booster might have been failing I hated the mooshy feel.
__________________
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Time to replace rotors. Which brake upgrades? | BennyLava | DIY / Maintenance / Service | 25 | 05-16-2016 05:57 PM |
| Problem removing front brake rotor | jkuchta | DIY / Maintenance / Service | 24 | 02-27-2016 10:41 PM |
| Bolt Thread Size 4 Brake Drum Removal | BobTheYaris | DIY / Maintenance / Service | 5 | 08-17-2014 01:14 PM |
| Dealer: Disabling the seat belt chime is now illegal? | schleppy | Cosmetic Modifications (Exterior/Interior) | 13 | 04-18-2009 04:43 PM |
| DIY For radios that require attaching a wire to parking brake | Slick | DIY / Maintenance / Service | 0 | 04-16-2009 08:14 PM |
Linear Mode
