|
07-14-2012, 11:55 PM | #1 |
Drives: 2007 Liftback Join Date: Mar 2012
Location: Central Ohio
Posts: 164
|
The bolt that holds on the tensioner....
OK, what size is that bolt that goes to the top of the rail that the alternator top bolt bolts to (if that makes any sense, LOL) Somehow, I lost mine. (I know it seems like I start a new DIY thread everyday) |
07-15-2012, 03:50 AM | #2 |
Drives: NCP91 Join Date: Jul 2012
Location: Markham, Ontario, Canada
Posts: 114
|
12 mm hex M10 x 1.25 mm
from memory; I will need to be at work on Monday to confirm this. |
07-23-2012, 12:26 AM | #3 |
Drives: 2007 Liftback Join Date: Mar 2012
Location: Central Ohio
Posts: 164
|
Maybe I should clarify....
Not sure how I lost mine. :/ |
07-23-2012, 10:19 AM | #4 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
That one is not a bolt, but rather a threaded stud into the top of the block that the arm slides onto. Then a 10mm x 1.25 nut holds the arm in place.
__________________
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Belt Tensioner for the Yaris | fmicle | DIY / Maintenance / Service | 25 | 11-26-2022 11:37 PM |
Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 08:14 PM |
Warning - Broken control arm bolt! | CB900F2 | DIY / Maintenance / Service | 460 | 08-23-2020 05:54 PM |
Over tightened bolt | KSIbucky | DIY / Maintenance / Service | 5 | 09-02-2011 06:31 AM |
bottom long bolt for alternator | yaris9876 | DIY / Maintenance / Service | 5 | 05-24-2010 02:02 PM |