Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 05-07-2009, 06:20 AM   #1
The Shape
 
Drives: 2007 Yaris Sedan
Join Date: Nov 2008
Location: Arkansas
Posts: 56
Which mark on engine oil dipstick?

I changed the oil recently on my wife's yaris and with a new filter put in about 3 3/4 quarts of oil. The level on the dipstick is above the crosshatched area it covers the F on the stick. Is this to much will it damage the engine??
The Shape is offline   Reply With Quote
Old 05-07-2009, 09:02 AM   #2
SpaceShot
 
SpaceShot's Avatar
 
Drives: 2008 Yaris 5 speed HB
Join Date: Oct 2008
Location: NH
Posts: 171
That is just a little bit over, so I don't think it will do any real damage. But you may find that your mileage is 2-3Mpg lower than usual.

Run it for a day and check it again.

If it is still over the top mark, simply undo the plug only enough to let it drip (do not remove) after 30 seconds or so, wipe the outlet with a clean rag and tighten the plug fully.

For the little bit that you might be over, it may not be worth the trouble to try and drain off the extra 1/2 quart. The first gen Scion xB has the same size motor, and I know some people just put in a full 4 quarts into it with a filter change without even thinking about it.
SpaceShot is offline   Reply With Quote
Old 05-07-2009, 09:12 AM   #3
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
i put 4qt and it goes just right at the top of the cross.

the thing is, when you do it on your driveway, it depends on how your car is angled. I always put mine angled backward, so oil drains out without leaving a "lake" inside the pan.

I usually let it drain while i go eat lunch, and then come back later to finish the job. :P


jetedit: shouldn't the 1nz-fe take a full 4qt?? ie, 3.7L
IllusionX is offline   Reply With Quote
Old 05-07-2009, 09:17 AM   #4
Snyprwlf47
The Martian
 
Snyprwlf47's Avatar
 
Drives: 07 Yaris 3dr
Join Date: Nov 2008
Location: Cannelton, WV
Posts: 208
Send a message via AIM to Snyprwlf47 Send a message via Yahoo to Snyprwlf47
Spaceshots right, chances are that it wont damage the engine but it will slow it up just a bit. Just remember that too little is WAY better than too much!
__________________
"The lead car is absolutely unique, except for the one behind it which is identical." – F1 commentator Murray Walker.
Snyprwlf47 is offline   Reply With Quote
Old 05-07-2009, 11:29 AM   #5
yaris-me
Learn to Relax
 
Drives: 2007, Meteorite, LB
Join Date: Dec 2008
Location: Anaheim, CA
Posts: 2,070
I don't think you have to worry. Next time, put three quarts, run the engine and check to see how much you need to add. I usually put 3 1/2 quarts to reach the full mark.
yaris-me is offline   Reply With Quote
Old 05-07-2009, 02:52 PM   #6
hatchbackkid82
 
Drives: .
Join Date: Apr 2007
Location: .
Posts: 1,828
Is your dipstick plastic or metal? Let me stop before i get banned, the dipstick subject is very sensitive around here.
hatchbackkid82 is offline   Reply With Quote
Old 05-07-2009, 03:55 PM   #7
2006fronty
 
2006fronty's Avatar
 
Drives: 2010 Mazda3 iTouring
Join Date: Jun 2007
Location: San Bernardino
Posts: 234
Quote:
Originally Posted by hatchbackkid82 View Post
Is your dipstick plastic or metal? Let me stop before i get banned, the dipstick subject is very sensitive around here.
I hate my plastic dipstick, can I replace it with a metal one? What if the plastic breaks and gets in my engine? HAHAHAHAHAHAHA
__________________
2006fronty is offline   Reply With Quote
Old 05-07-2009, 04:06 PM   #8
hatchbackkid82
 
Drives: .
Join Date: Apr 2007
Location: .
Posts: 1,828
Awwwww man your asking for it Can i put wings on my Yaris? Remember that one or better yet; What's a pulley?

Quote:
Originally Posted by 2006fronty View Post
I hate my plastic dipstick, can I replace it with a metal one? What if the plastic breaks and gets in my engine? HAHAHAHAHAHAHA
hatchbackkid82 is offline   Reply With Quote
Old 05-07-2009, 06:01 PM   #9
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
10 years already with the 1nz-fe. I don't recall anybody having the plastic stick breaking apart and falling into the oil pan.
IllusionX is offline   Reply With Quote
Old 05-07-2009, 06:30 PM   #10
eii
Rides canyon walls
 
eii's Avatar
 
Drives: 1988 RX7 FC 10th AE
Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
Quote:
Originally Posted by 2006fronty View Post
I hate my plastic dipstick, can I replace it with a metal one? What if the plastic breaks and gets in my engine? HAHAHAHAHAHAHA
I think that happened to yaris t-sport, not sure what he did to get it out.
__________________

OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header
eii is offline   Reply With Quote
Old 05-08-2009, 10:49 AM   #11
b_hickman11
 
Drives: 08 Sedan
Join Date: Oct 2008
Location: Tyler, TX
Posts: 899
Quote:
Originally Posted by IllusionX View Post
10 years already with the 1nz-fe. I don't recall anybody having the plastic stick breaking apart and falling into the oil pan.
There was someone on here a while back that had their dipstick break off inside of the engine......not for sure who that was though
b_hickman11 is offline   Reply With Quote
Old 05-17-2009, 09:23 PM   #12
2bad4u
 
Drives: 06 Toyota Vitz RS
Join Date: Apr 2009
Location: Kingston, Jamaica W.I.
Posts: 78
Vitz RS comes with a metal dip stick
2bad4u is offline   Reply With Quote
Old 05-18-2009, 10:19 AM   #13
Yaris Hilton
Half a Bubble Off Plumb
 
Yaris Hilton's Avatar
 
Drives: 2009 Yaris Sedan
Join Date: Mar 2009
Location: Bristol, Tennessee, USA
Posts: 1,593
Smile

My 3 Yarises and the Echo before them all have metal dipsticks. He must've gotten a special one.
Yaris Hilton is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
leaky seal on engine? oil overfill? jeff69dini DIY / Maintenance / Service 23 06-07-2010 12:52 AM
Engine oil ddi not come out hans_fh DIY / Maintenance / Service 18 01-23-2009 11:30 PM
Which side of engine oil dipstick do you read ? Yawesh General Yaris / Vitz Discussion 11 01-08-2009 03:43 PM
The Advantages of Nitrous on an Engine KCALB SIRAY Performance Modifications 7 01-02-2009 10:53 AM
Motor oil debate - interesting info but a long read. mikeukrainetz General Yaris / Vitz Discussion 6 12-10-2006 08:16 PM


All times are GMT -4. The time now is 03:11 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.