16"x7.0 + 44 Rims - Page 2 - Toyota Yaris Forums

Thalmes · 08-04-2010, 05:27 AM

Hmm , I went to a local springstore. They quoted me about $650 for kings springs , labour as it will take about 2 hours .

So I think I'll be going for it ! Got my 17" and it looks great !

Anyway, guys with the Scion badge on the yaris . Do you change it yourself or got someone else to do it ? What's the diameter / measurements so I can get a set for myself. I want to change my tags to Vitz as well . Haha

lunjiaow · 08-05-2010, 06:12 AM

Wow $650 is heaps to just change springs =S
But that should be with wheel alignment right?

I wouldnt mind the scion rear badge but i might get a netz one instead.
check out http://www.microimageonline.com if you want some accessories.

Thalmes · 08-05-2010, 09:11 AM

I found a place to buy it actually . I just need the measurements though .

Anyway guys !

For the springs ... I've got Pedders Spring
#
Front Spring Low
2942 2942 Sports Ryder Coil Spring
#
Rear Spring Low
2943 2943 Sports Ryder Coil Spring

My car is NCP90 / 2009/10 model .

The catalogue said 2005ON(onwards I think) / NCP90 ... So I take that it should fit right ? I saw the shape , It's identical to my stock spring . Fat and short .

The picture : http://www.pedders.com.au/photoGallery/32/1/photo184
I'm just double checking as people keep saying that my car is too new and there's no springs for it yet (Kings Spring ) ...

lunjiaow · 08-06-2010, 05:17 AM

our generation is getting quite old now. just your one is series two, which is the update model. just exterior and interior trim are changed only and probably a few more features.

Anyway, suspension are all the same from 05/06 to current.

Thalmes · 08-06-2010, 09:40 AM

Okay ... That's good to hear !

Looking for springs is the pain in the S !! First kings spring said it's too new and need to custom made , Eibach needs a week and it's 6xx , Lovells needs a week and it's 3xx ... Finally I called Pedders . The dude : I got it now ...

I was like yay !!! So i'm bringing it to install tomorrow ... Wish me luck in getting my desired height =P

hazzy · 09-17-2010, 01:11 AM

Bump
I purchased Rota Torques 16x7 with 40ET and was looking forward to get it installed with 205/50/16. I went to a couple of tyre places and most of them agree that the speedometer accuracy will be way off and thus was recommended to install 195/45/16 or 205/45(40)/16. What gives?

08-05-2010, 09:11 AM	#21
Thalmes Drives: Toyota Yaris NCP90 Join Date: Jul 2010 Location: Perth , Australia Posts: 47	I found a place to buy it actually . I just need the measurements though . Anyway guys ! For the springs ... I've got Pedders Spring # Front Spring Low 2942 2942 Sports Ryder Coil Spring # Rear Spring Low 2943 2943 Sports Ryder Coil Spring My car is NCP90 / 2009/10 model . The catalogue said 2005ON(onwards I think) / NCP90 ... So I take that it should fit right ? I saw the shape , It's identical to my stock spring . Fat and short . The picture : http://www.pedders.com.au/photoGallery/32/1/photo184 I'm just double checking as people keep saying that my car is too new and there's no springs for it yet (Kings Spring ) ... Last edited by Thalmes; 08-06-2010 at 04:34 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: 4 15" alloy rims	_Bravo_	Willing to Buy by private party	2	02-19-2010 06:39 PM
Looking for 15 inch stock steel rims	hop	Canada	2	01-21-2010 07:18 AM
Need help when ordering my tires and rims	thomasward00	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	04-26-2007 09:40 PM
FS: 07 yaris RS stock rims n tires	thegame11	Items for Sale by private party	5	04-15-2007 01:25 PM
hufeisen rims	JustYYaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	01-17-2007 03:16 PM

08-04-2010, 05:27 AM	#19
Thalmes Drives: Toyota Yaris NCP90 Join Date: Jul 2010 Location: Perth , Australia Posts: 47	Hmm , I went to a local springstore. They quoted me about $650 for kings springs , labour as it will take about 2 hours . So I think I'll be going for it ! Got my 17" and it looks great ! Anyway, guys with the Scion badge on the yaris . Do you change it yourself or got someone else to do it ? What's the diameter / measurements so I can get a set for myself. I want to change my tags to Vitz as well . Haha

08-05-2010, 06:12 AM	#20
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	Wow $650 is heaps to just change springs =S But that should be with wheel alignment right? I wouldnt mind the scion rear badge but i might get a netz one instead. check out http://www.microimageonline.com if you want some accessories.

08-06-2010, 05:17 AM	#22
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	our generation is getting quite old now. just your one is series two, which is the update model. just exterior and interior trim are changed only and probably a few more features. Anyway, suspension are all the same from 05/06 to current.

08-06-2010, 09:40 AM	#23
Thalmes Drives: Toyota Yaris NCP90 Join Date: Jul 2010 Location: Perth , Australia Posts: 47	Okay ... That's good to hear ! Looking for springs is the pain in the S !! First kings spring said it's too new and need to custom made , Eibach needs a week and it's 6xx , Lovells needs a week and it's 3xx ... Finally I called Pedders . The dude : I got it now ... I was like yay !!! So i'm bringing it to install tomorrow ... Wish me luck in getting my desired height =P

09-17-2010, 01:11 AM	#24
hazzy View User's Garage Drives: Yaris YR Join Date: Apr 2010 Location: Sydney, Australia Posts: 46	Bump I purchased Rota Torques 16x7 with 40ET and was looking forward to get it installed with 205/50/16. I went to a couple of tyre places and most of them agree that the speedometer accuracy will be way off and thus was recommended to install 195/45/16 or 205/45(40)/16. What gives?