Which midpipe? - Toyota Yaris Forums

MGargano · 05-17-2009, 09:05 PM

I have a Megan header and Megan axle-back and am using the stock midpipe. I'm wondering what options are out there that will:

1. increase size/performance
2. bolt up to my existing header/axle back without much (if any) modification
3. still be emissions legal

I see the Nitto midpipe at Micro Image but I'm not sure if it meets these criteria. I have to take the car to a shop to have the axle-back adjusted so it stops rattling, so I'm thinking I might go custom but I'd appreciate any help/feedback.

fuji · 05-18-2009, 12:51 AM

Just curious, do you drive a manual or an auto?

MGargano · 05-18-2009, 01:02 AM

'09 LB w/ manual trans

fuji · 05-18-2009, 03:02 AM

Read the thread about my exhaust experiment. You need to ask what RPM range you usually drive in. If it is higher, than I would recommend a bit larger pipe. Even a 2" crush bent tube is supposed to flow more than the mandrel bent 1.75".

05-17-2009, 09:05 PM	#1
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	Which midpipe? I have a Megan header and Megan axle-back and am using the stock midpipe. I'm wondering what options are out there that will: 1. increase size/performance 2. bolt up to my existing header/axle back without much (if any) modification 3. still be emissions legal I see the Nitto midpipe at Micro Image but I'm not sure if it meets these criteria. I have to take the car to a shop to have the axle-back adjusted so it stops rattling, so I'm thinking I might go custom but I'd appreciate any help/feedback.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nitto Midpipe w/ no muffler	SweetRS	Performance Modifications	12	05-12-2009 12:57 AM
1.75" (OEM midpipe) to 2.25" (MR axle-back)?	350zrb	Performance Modifications	1	04-26-2009 09:36 PM
Q about nitto midpipe?	jaserhunter	Performance Modifications	28	04-22-2009 02:28 PM
dc header and nitto midpipe..	mastaofdisasta	Performance Modifications	3	04-17-2009 09:12 AM
stock midpipe	at3GG	Willing to Buy by private party	22	11-24-2008 08:21 PM

05-18-2009, 12:51 AM	#2
fuji Drives: Polar White Yaris HB Join Date: Dec 2008 Location: Honolulu Posts: 263	Just curious, do you drive a manual or an auto?

05-18-2009, 01:02 AM	#3
MGargano Drives: 2009 Yaris Hatchback Join Date: Feb 2009 Location: NJ Posts: 792	'09 LB w/ manual trans

05-18-2009, 03:02 AM	#4
fuji Drives: Polar White Yaris HB Join Date: Dec 2008 Location: Honolulu Posts: 263	Read the thread about my exhaust experiment. You need to ask what RPM range you usually drive in. If it is higher, than I would recommend a bit larger pipe. Even a 2" crush bent tube is supposed to flow more than the mandrel bent 1.75".