|
12-07-2013, 10:39 PM | #1 |
Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Replica Vitz from 2006 Yaris ;)
Hello all,
Below are latest update pictures for my converted JDM Vitz... The latest mod that I did was the Runstop rear disc conversion. Good looking stuffs with improved 20% of braking power, one of the good investment mod. The mods list is shown on my signature... Hope you guys like it... Enjoy it, guys... P.S. Sorry for the large crappy photos taken from my phone cam.
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres Last edited by evo165; 12-07-2013 at 11:10 PM. |
12-07-2013, 11:46 PM | #2 |
Drives: Yaris SE 2014 Join Date: Sep 2013
Location: Repentigny, Qc
Posts: 14
|
Very nice!
|
12-08-2013, 01:30 AM | #3 |
play every day
Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012
Location: Los Angeles
Posts: 1,961
|
Your pics are just fine, and your car is beautiful. Dark wheels on a white car look really cool.
Greg |
12-08-2013, 09:43 PM | #4 |
Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Thank you Yalexris and Greg for the kind words. :) I am thinking what is next for my Yaris? Any others suggestion? ;)
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres |
12-29-2013, 03:46 AM | #5 |
Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
latest update: 29 Dec 2013
Guys, finally i took the courage and go for the 16" Enkei RPF1 offset 35mm. Sure it look damn flush now.
Before this I am using the Runstop/R1 rear disc conversion. To my honest opinion, the conversion kit is 1. It create a lot of noise during right cornering in all speed. And it is only on the right turn cause this noise. Soft..loud..soft...loud. I hear it is from rear right hand. When the rear right is less load during right turn cornering, the system give out noise! The noise is the kind of sound that the caliper, brake pads, rotors etc is not being flat/true. Damn irritating. The mechanic confirm that it is the rear bracket that hold the caliper is warped. 2. The Runstop/R1 caliper design to use only their brake pads. No other after market company make them. Kind of suck 3. I must say the braking performance is sure improved. Somehow i feel the rear stopping action is way "too much" causing UN-balance brake bias between the front. Find up and low from local junk yards and managed to get 1 used Vitz RS complete rear axle with disc brake which they just imported and it is still fresh in their container, lucky ME!! Got them to deliver the next day and got it installed by my mechanic. Now, everything is so freaking smooth and JDM feel... P.S. Due to the axle design of holding the caliper to the axle, i cannot use the PG hub spacer now. Because using it will cause our rotors extend out but NOT the caliper. I am planning to do the rim spacers with extended studs next round.
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres |
12-30-2013, 04:51 PM | #6 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Nice! I love the 16s.
|
12-31-2013, 10:48 AM | #7 |
それを吸ってください
|
Looks great! Nice job.
|
01-01-2014, 11:46 PM | #8 |
Drives: peArL yAvItZ!! Join Date: Jul 2009
Location: *tIny dOts iN AsiA*
Posts: 156
|
Thank you sir for your kind words. :) Loving the Yaris deeper and deeper now... ;)
__________________
1NZ-FE Yaris with JDM RS front & rear bumper | JDM Vitz RS taillamp | JDM Vitz window visors | JDM Vitz Netz logos | JDM leather steering wheel & shift knob | 4k HID | K&N panel filter | Fujitsubo Wagolis exhaust | NST 10% crank pully | KYB Excel-G shocks | NF210 Springs | Cusco 4 points lower arm bar & Type OS top struct bar | RZCrew sub-frame collars | Ultra Racing 19mm rear sway bar & rear lower & center braces | PG Rear 13mm hub spacers | Exzess 2-pot calipers with 282mm rotors | Runstop Rear Disc | SSR Semi-Forge Type F 15" rims | Michelin Pilot Sport 3 195/55/15 tyres |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
FS: 2006 Toyota Yaris 4-door hatch | 06yaris06 | Cars for Sale by private party | 7 | 10-24-2013 09:05 AM |
OEM Toyota Yaris / Vitz RS conversion | botchilah | Cosmetic Modifications (Exterior/Interior) | 4 | 08-06-2009 02:47 AM |
2007 Yaris Pricing Info ! | YarisBueller | New YARIS Purchase Forum | 104 | 06-24-2009 04:54 PM |