GROUP BUY - NST Crank Pulley - Page 2 - Toyota Yaris Forums

*Chris07LB* · 12-17-2006, 06:25 PM

10 left then... maybe ill get in on this... ill see.

punch · 12-17-2006, 06:31 PM

curious is the shop manual it says the pully is dampened, but this one isn't what effects will this have on the car?

ChinoCharles · 12-17-2006, 07:35 PM

$100 and I'm in... maybe 20 people will jump and they'll come down. Who knows.

riceboy · 12-17-2006, 08:07 PM

Hey everyone,

Something's come up so this GB is on hold, until I can get a couple things cleared up. Thanks for everyone's interest, & I'll keep everyone updated if things change.

A.

eco · 12-17-2006, 08:42 PM

Did you guys go to the websites above and notice that the benifits for theyre pulleys and muffler are the same,that saays somthing about this company.

BENEFITS
Great weight reduction
- Average of 65% - 70% over OEM
Increased horsepower
- Average of 7 - 10 horsepower
Lower ET's & higher trap speeds
- Average of .20s & average of 2MPH

YarisGuy · 12-18-2006, 01:30 AM

Quote:

Originally Posted by eco

Did you guys go to the websites above and notice that the benifits for theyre pulleys and muffler are the same,that saays somthing about this company.

BENEFITS
Great weight reduction
- Average of 65% - 70% over OEM
Increased horsepower
- Average of 7 - 10 horsepower
Lower ET's & higher trap speeds
- Average of .20s & average of 2MPH

I took a look around their site and found stuff like:

Weight comparisons between OEM and NST pulleys

Honda Civic
OEM Crank 74oz NST 24oz
OEM Alternator 08oz NST 03oz
OEM Water Pump 22oz NST 08oz

Scion tC
OEM Crank 59oz NST 14oz
OEM Alternator 10oz NST 03oz
OEM Water Pump 14oz NST 06oz

Nissan 350Z
OEM Crank 100oz NST 23oz
OEM Alternator 08oz NST 03oz
OEM Water Pump 15oz NST 12oz

These numbers are all about 70% lighter than the OEM numbers.
Are you suggesting that these are false claims and that their pulley numbers are false fabrications?

eco · 12-18-2006, 01:06 PM

I also noticed that,and no thats not what Im saying,I was just saying that how could the benifits be the same,maybe they dont do any testing of theyre products,besides weight change.

*Chris07LB* · 12-18-2006, 01:39 PM

They seem to have a very good reputation with the Scion crowd...

dngz · 12-19-2006, 07:49 PM

any word yet albert?

nick1983 · 12-19-2006, 08:21 PM

I'll be in once it is back in

punch · 12-20-2006, 07:21 AM

Notice albert hasn't been online since dec 17th, what's up with that?

Ran Kizama · 12-20-2006, 09:28 AM

I'm in.

riceboy · 12-20-2006, 06:15 PM

Sorry boys, still waiting on a couple of different things... and been busy w/ work... will update everyone once things are together.

dngz · 12-22-2006, 08:46 PM

want.. pulley... noooww...!!!!

ChinoCharles · 12-27-2006, 10:20 PM

I actually had the chance to talk to Mike from NST today for a bit about the part and what their pulleys do and are capable of. Pretty cool stuff... their products have worked wonders for Scion tC's, Acura TSX's, and they're even working on fitting a pulley kit into a Lotus Elise. Expected gains on the 1NZ-FE are mild, but the increased engine response you'll see from a pulley will help out a bit with that straight line speed issue. What is also nice is that if we can convince some companies to develop some other engine components, NST will likely continue to deliver the right pulley for the job. The tC community now has something like 11 pulley options from NST alone. Lets all hope we have a new supporting vendor soon!

Extremely cool link with some extremely encouraging numbers.

http://www.nonstoptuning.com/pageSponsoredTC.htm

jmew0ng · 12-30-2006, 06:39 AM

sign me up too. How do I go about sending payment? PM?

*Chris07LB* · 12-30-2006, 09:02 AM

Quote:

Originally Posted by jmew0ng

sign me up too. How do I go about sending payment? PM?

"12-17-2006, 08:07 PM

Hey everyone,

Something's come up so this GB is on hold, until I can get a couple things cleared up. Thanks for everyone's interest, & I'll keep everyone updated if things change.

A.

NonStopTuning · 12-30-2006, 04:03 PM

Many many thanks to RiceBoy for getting this thing started for us.

For everyone who has shown interest thus far, thank you very much.

Please everyone, check out the following thread...
http://www.yarisworld.com/forums/sho...ed=1#post44991

12-20-2006, 09:28 AM	#30
Ran Kizama That Anime Guy View User's Garage Drives: 5-Speed Liftback Join Date: Jul 2006 Location: Canton, GA Posts: 543	I'm in. __________________

12-27-2006, 10:20 PM	#33
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	I actually had the chance to talk to Mike from NST today for a bit about the part and what their pulleys do and are capable of. Pretty cool stuff... their products have worked wonders for Scion tC's, Acura TSX's, and they're even working on fitting a pulley kit into a Lotus Elise. Expected gains on the 1NZ-FE are mild, but the increased engine response you'll see from a pulley will help out a bit with that straight line speed issue. What is also nice is that if we can convince some companies to develop some other engine components, NST will likely continue to deliver the right pulley for the job. The tC community now has something like 11 pulley options from NST alone. Lets all hope we have a new supporting vendor soon! Extremely cool link with some extremely encouraging numbers. http://www.nonstoptuning.com/pageSponsoredTC.htm Last edited by ChinoCharles; 12-27-2006 at 10:32 PM.

12-30-2006, 04:03 PM	#36
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	Many many thanks to RiceBoy for getting this thing started for us. For everyone who has shown interest thus far, thank you very much. Please everyone, check out the following thread... http://www.yarisworld.com/forums/sho...ed=1#post44991 __________________ MIKE @ NST www.NonStopTuning.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GROUP BUY - JDM (RS) Vitz LED Tail Lamp ...	riceboy	Items for Sale by private party	453	07-14-2007 08:30 AM
Perrin Crank Pulley	IntensePower	Performance Modifications	6	02-22-2007 12:08 PM
KLight HID Conversion Group Buy!! $165.00 shipped!!	JRT lighting	Sponsors Classifieds Area	4	11-20-2006 10:47 PM
Intake group buy?	Lowfront	Items for Sale by private party	20	11-17-2006 04:45 PM
GROUP BUY...Spiderlite X2,plug n play LED stop lights.	eco	Cosmetic Modifications (Exterior/Interior)	12	10-07-2006 11:05 AM

12-17-2006, 06:25 PM	#19
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	10 left then... maybe ill get in on this... ill see.

12-17-2006, 06:31 PM	#20
punch Drives: 2007 Yaris Sedan "D" package Join Date: May 2006 Location: Barrie, ontario Posts: 852	curious is the shop manual it says the pully is dampened, but this one isn't what effects will this have on the car?

12-17-2006, 07:35 PM	#21
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	$100 and I'm in... maybe 20 people will jump and they'll come down. Who knows.

12-17-2006, 08:07 PM	#22
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	Hey everyone, Something's come up so this GB is on hold, until I can get a couple things cleared up. Thanks for everyone's interest, & I'll keep everyone updated if things change. A.

12-17-2006, 08:42 PM	#23
eco Drives: 2007 Black Yaris sedan Join Date: Sep 2006 Location: Atlanta Posts: 884	Did you guys go to the websites above and notice that the benifits for theyre pulleys and muffler are the same,that saays somthing about this company. BENEFITS Great weight reduction - Average of 65% - 70% over OEM Increased horsepower - Average of 7 - 10 horsepower Lower ET's & higher trap speeds - Average of .20s & average of 2MPH

12-18-2006, 01:06 PM	#25
eco Drives: 2007 Black Yaris sedan Join Date: Sep 2006 Location: Atlanta Posts: 884	I also noticed that,and no thats not what Im saying,I was just saying that how could the benifits be the same,maybe they dont do any testing of theyre products,besides weight change.

12-18-2006, 01:39 PM	#26
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	They seem to have a very good reputation with the Scion crowd...

12-19-2006, 07:49 PM	#27
dngz View User's Garage Drives: black yaris sedan Join Date: Jun 2006 Location: vancouver Posts: 475	any word yet albert?

12-19-2006, 08:21 PM	#28
nick1983 View User's Garage Drives: 2007 Toyota Yaris sedan Join Date: Aug 2006 Location: Winnipeg Manitoba Posts: 318	I'll be in once it is back in

12-20-2006, 07:21 AM	#29
punch Drives: 2007 Yaris Sedan "D" package Join Date: May 2006 Location: Barrie, ontario Posts: 852	Notice albert hasn't been online since dec 17th, what's up with that?

12-20-2006, 06:15 PM	#31
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	Sorry boys, still waiting on a couple of different things... and been busy w/ work... will update everyone once things are together.

12-22-2006, 08:46 PM	#32
dngz View User's Garage Drives: black yaris sedan Join Date: Jun 2006 Location: vancouver Posts: 475	want.. pulley... noooww...!!!!

12-30-2006, 06:39 AM	#34
jmew0ng Drives: Scion FRS Join Date: Aug 2006 Location: Arizona Posts: 179	sign me up too. How do I go about sending payment? PM?