Single 10" Sealed Box - BIRCH baffle! - Toyota Yaris Forums

spkrman · 02-10-2007, 08:49 PM

The box itself comes with binding posts, and 14ga (or 12ga?) wiring pre-run. The interior is coated, it is glued and screwed. The panel the woofer mounts to is quality Birch ply (the $70 a sheet stuff!) that is stained with... the name of the stain escapes me... and varnished. Birch is *extremely* strong and holds screws extremely well, it is more comparable to a double layer (1.5") MDF baffle. The rest of the box is MDF.

There is gasket caulk around the woofer hole to ensure a 100% seal around the woofer. There are no leaks in this box.

It is approx 1.15 cube, which is perfect for most 10" woofers. If your not sure, ask me and I'll let you know if your woofer will fit.

www.spkrman.com for previous work.

Asking $125 shipped to the continental US, $160 shipped with the woofer.

This is a test box that I built from smaller piece of scrap I had laying around (hence the birch baffle), and it was used temporarily in my yaris just to have a little bump.

thx for lookin

Edit: This box will work in nearly any car, and fits in the LB firing back, up, sideways etc. The dimensions are 12 1/8 x 12 1/8 x 13 5/8.

spkrman · 02-11-2007, 05:45 AM

pic in the yaris:

spkrman · 02-11-2007, 07:30 AM

brain fart....

.75 cubes

spkrman · 02-11-2007, 10:00 PM

up for offers :)

spkrman · 02-14-2007, 06:41 PM

Bump for $85 shipped

02-10-2007, 08:49 PM	#1
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	Single 10" Sealed Box - BIRCH baffle! The box itself comes with binding posts, and 14ga (or 12ga?) wiring pre-run. The interior is coated, it is glued and screwed. The panel the woofer mounts to is quality Birch ply (the $70 a sheet stuff!) that is stained with... the name of the stain escapes me... and varnished. Birch is extremely strong and holds screws extremely well, it is more comparable to a double layer (1.5") MDF baffle. The rest of the box is MDF. There is gasket caulk around the woofer hole to ensure a 100% seal around the woofer. There are no leaks in this box. It is approx 1.15 cube, which is perfect for most 10" woofers. If your not sure, ask me and I'll let you know if your woofer will fit. www.spkrman.com for previous work. Asking $125 shipped to the continental US, $160 shipped with the woofer. This is a test box that I built from smaller piece of scrap I had laying around (hence the birch baffle), and it was used temporarily in my yaris just to have a little bump. thx for lookin Edit: This box will work in nearly any car, and fits in the LB firing back, up, sideways etc. The dimensions are 12 1/8 x 12 1/8 x 13 5/8.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
(3) 12" JL 12w3v2 in sealed Subzone Box!	JustYYaris	Items for Sale by private party	9	03-25-2007 11:13 PM
Single 12" IDMAX Birch build!	spkrman	In Car Entertainment + Electronics (audio / video / alarm)	7	12-02-2006 07:16 PM

02-11-2007, 05:45 AM	#2
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	pic in the yaris:

02-11-2007, 07:30 AM	#3
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	brain fart.... .75 cubes

02-11-2007, 10:00 PM	#4
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	up for offers :)

02-14-2007, 06:41 PM	#5
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	Bump for $85 shipped