Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Cosmetic Modifications (Exterior/Interior)
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 12-10-2017, 11:45 PM   #1
govtec
 
Drives: 2007 Toyota Yaris Hatchback
Join Date: Aug 2017
Location: Phila, PA
Posts: 58
DIY: OEM JDM HID Headlight Conversion

Hi All,

Look what I got early for Christmas this year. Yup, just received my order from Buyee for a pair of JDM HID Headlight from Japan. I actually got 2 sets (ordered the post-facelift by accident). I will be using the pre-facelight for my wife's 07 Hatch and plan on selling the post-facelift once I'm done with the DIY write-up.

Now here comes the hard part. I'll need everyone's input to make this project a success and everyone else will have a chance to do the conversion. Specifically, I need part numbers that I need to order for the pigtails without cutting any wires coming from the car.

Enviri - Feel free to chime in since you've already completed this project in another post. Do you mind sharing the male/female pigtail plugs that I need to purchase?

Thank you all! I've done this JDM HID conversion on my 09 Rav4 and it makes a world of difference driving at night!
Attached Images
File Type: jpg IMG_1127.jpg (109.1 KB, 1064 views)
File Type: jpg IMG_1128.jpg (125.6 KB, 1046 views)
File Type: jpg IMG_1129.jpg (100.4 KB, 1046 views)
File Type: jpg IMG_1130.jpg (113.7 KB, 1034 views)
File Type: jpg IMG_1131.jpg (109.1 KB, 1039 views)
File Type: jpg IMG_1132.jpg (64.5 KB, 1032 views)
File Type: jpg IMG_1133.jpg (105.7 KB, 1042 views)

Last edited by govtec; 12-11-2017 at 12:25 AM. Reason: title
govtec is offline   Reply With Quote
Old 12-11-2017, 07:57 AM   #2
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516



Last edited by enviri; 12-11-2017 at 08:18 AM.
enviri is offline   Reply With Quote
Old 12-11-2017, 08:25 AM   #3
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
hmm it looks like you already got the ballasts included (i hate you for that)

90980-10942(x2) is the female 4 pin connector you need.
(luckily it seems someone is selling one with wires already put in place, https://www.ebay.com/itm/90980-10942...t/351993047230)

then you need to ebay a quality h4 female pigtail connector, and a 194/t10 parking light extension cable.

then of course, a D4R bulb (NOT AN D4S, D4C may work.) and H7 for the super useless highbeam.

D4R in america is used in 06-09 prius, and 08-10 avalons.
GARAX and TOM's makes great bulbs outside the traditional OEM color range, that wont destroy the wallet btw...

CTScott helped alot on details of connecting the wiring, and he added an extra ground somewhere, which i forget.

Last edited by enviri; 12-11-2017 at 09:07 AM.
enviri is offline   Reply With Quote
Old 12-11-2017, 09:33 AM   #4
Whiplash
 
Drives: 2009 Yaris 4DR
Join Date: Aug 2017
Location: Ontario
Posts: 99
I would like this, depending on total price.
Whiplash is offline   Reply With Quote
Old 12-11-2017, 10:21 PM   #5
govtec
 
Drives: 2007 Toyota Yaris Hatchback
Join Date: Aug 2017
Location: Phila, PA
Posts: 58
Thanks enviri, I'll get the ordering started. My headlight pretty much came with everything including all the bulbs and ballasts. Am I still good to use the D2R bulb? It says on the side of the marking D2R 35W. The highbeams were a real pain to take out because the retainer clip was on pretty tight. Luckily I won't be changing this that often.

Also, if you take a look at img1141, it shows the the top half of the HID projector beam inside the case. Unlike my Rav4, which I had to reverse the metal plate that was inside the projector casing, it appears that with the Yaris there is no metal plate on the inside and you can adjust the beam pattern from left hand side to right hand side by just using a screw driver.

Enviri - On the last image, can you get met started on which of the 4 wires are connected to the H4 connector?

Thanks
Attached Images
File Type: jpg IMG_1134.jpg (58.7 KB, 1002 views)
File Type: jpg IMG_1136.jpg (83.3 KB, 1001 views)
File Type: jpg IMG_1137.jpg (76.5 KB, 1004 views)
File Type: jpg IMG_1138.jpg (75.6 KB, 994 views)
File Type: jpg IMG_1139.jpg (65.8 KB, 997 views)
File Type: jpg IMG_1140.jpg (69.4 KB, 997 views)
File Type: jpg IMG_1141.jpg (78.0 KB, 998 views)
File Type: jpg IMG_1142.jpg (83.2 KB, 998 views)
File Type: jpg IMG_1144.jpg (100.1 KB, 995 views)
govtec is offline   Reply With Quote
Old 12-12-2017, 09:41 AM   #6
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
if it already has d2r then first check the part number of the ballast, and stay d2r.

wiring i have to get back to you.
im pretty sure green is the parking light, and black is common ground. our headlight has a switched positive setup (or is it switched negative?), i gotta pop the hood and check it out once weather permits.
enviri is offline   Reply With Quote
Old 12-12-2017, 02:52 PM   #7
ezhacker1
 
ezhacker1's Avatar
 
Drives: Decepticon - Ravage
Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
H4 Connector is switched ground. Low and Hi has their own ground pin.

Based on Enviri connector photo and pin orientations im guessing

Red Low Beam
Black Hi Beam
Green Parking
Black 12v.
__________________


Check out my Build thread:
http://www.yarisworld.com/forums/showthread.php?t=52274

Last edited by ezhacker1; 12-12-2017 at 03:04 PM.
ezhacker1 is offline   Reply With Quote
Old 12-14-2017, 12:19 PM   #8
fredovvti
 
Drives: Yaris 07 HB
Join Date: Apr 2011
Location: Sabana Grande, PR
Posts: 70
How much you pay for shipping?
fredovvti is offline   Reply With Quote
Old 12-14-2017, 11:50 PM   #9
govtec
 
Drives: 2007 Toyota Yaris Hatchback
Join Date: Aug 2017
Location: Phila, PA
Posts: 58
I think $110
govtec is offline   Reply With Quote
Old 01-11-2018, 11:23 PM   #10
govtec
 
Drives: 2007 Toyota Yaris Hatchback
Join Date: Aug 2017
Location: Phila, PA
Posts: 58
Now that I'm catching a break from the snow and all my harnesses have finally arrived. I'm hoping to install this soon. Enviri - Any luck with getting the wire connections from your car? Just need some wire identification so I can solder the 4 to 3 prong harness. Also, I'm not sure where the 194/t10 parking light extension cable goes because I don't see any plug holes left for me to put this in the headlight. I took the little light bulb out in the picture and tried connecting the 194/t10 extension cable but that plug was fine with without any extension cable.

Thanks
Attached Images
File Type: jpg IMG_1246.jpg (99.4 KB, 914 views)
File Type: jpg IMG_1247.jpg (62.6 KB, 918 views)
File Type: jpg IMG_1248.jpg (98.8 KB, 914 views)
File Type: jpg IMG_1249.jpg (96.2 KB, 917 views)
File Type: jpg IMG_1250.jpg (68.3 KB, 912 views)
File Type: jpg IMG_1251.jpg (82.1 KB, 921 views)
govtec is offline   Reply With Quote
Old 01-12-2018, 09:52 AM   #11
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
I, too am at the mercy of the weather. Yesterday was perfect but i read this post near midnight lol. Today is warm but gettin some monsoon rains...

Anyway heres a quicky

https://youtu.be/F7PloYRGlrE

Parking light ground i think is connected to chassis. I need a good calm day to rip apart my headlight!

Last edited by enviri; 01-12-2018 at 12:10 PM.
enviri is offline   Reply With Quote
Old 01-12-2018, 12:14 PM   #12
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
Also you might start poppin fuaes on headlight use like i did. I went against ctscott's recommendation and went +5a... Although i think +2.5a is enough, maybe?
enviri is offline   Reply With Quote
Old 01-12-2018, 09:03 PM   #13
govtec
 
Drives: 2007 Toyota Yaris Hatchback
Join Date: Aug 2017
Location: Phila, PA
Posts: 58
Thanks dude! I'll give it a shot when the weather warms up again. I don't want to mess with the fuses or anything else because I'm not a very technical guy and don't want to burn anything.
govtec is offline   Reply With Quote
Old 01-12-2018, 09:17 PM   #14
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
once you're connected and got it working, the fuses will pop itself lol. It wasnt instant, but some days, off it goes. its the low beam fuse, obviously. i havent changed fuses since i upped the amps years back.
enviri is offline   Reply With Quote
Old 01-12-2018, 09:30 PM   #15
govtec
 
Drives: 2007 Toyota Yaris Hatchback
Join Date: Aug 2017
Location: Phila, PA
Posts: 58
I have the same problem with my Rav4 JDM HID Conversion. I heard this will prevent the fuse from popping...https://www.theretrofitsource.com/hd-relay-9006.html
govtec is offline   Reply With Quote
Old 01-19-2018, 01:27 AM   #16
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
i forgot i made a video of the light output

https://youtu.be/8_LdgAcEkfc
enviri is offline   Reply With Quote
Old 01-20-2018, 02:48 PM   #17
govtec
 
Drives: 2007 Toyota Yaris Hatchback
Join Date: Aug 2017
Location: Phila, PA
Posts: 58
Wow, what a difference between the HID and halogen lights.

Looks like we'll have warm weather for the next 2 weeks. Let me know if you can get one of the headlight apart and shoot the vids for each connecting harness. I only got a few of connecting wires from the first youtube video you put up because of the camera angle.

Thanks
govtec is offline   Reply With Quote
Old 01-20-2018, 05:28 PM   #18
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
Maybe tommorow!
enviri is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: 2012 Yaris oem headlight projector retrofit ucsmfu Items for Sale by private party 4 11-01-2016 10:28 PM
How can i get the OEM Headlight Stalk with FOG switch to work murtaza.shahid DIY / Maintenance / Service 0 11-22-2014 06:30 AM
DIY - A EASY&FAST way to change headlight bulb ALLBLACK DIY / Maintenance / Service 0 09-18-2010 01:40 AM
FS: Seibon, HID, JDM RS Tails, Shift Knob, Oddysey PC680 Battery, etc.. -- Socal 03Z33 Items for Sale by private party 30 01-02-2009 06:55 PM
DIY - JDM RS style REPLICA tails kurokoma-kun DIY / Maintenance / Service 0 10-21-2008 02:56 PM


All times are GMT -4. The time now is 05:57 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.