Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 06-04-2015, 06:43 AM   #1
Rednaz
 
Drives: 2006 Yaris 1300
Join Date: Jan 2014
Location: Cape Town, RSA
Posts: 30
Redtop BEAMS Conversion

I've recently found a company in South Africa that can do the BEAMS conversion for R33 000 (that's roughly $3300). It includes: Engine,Gearbox with mountings, Exhaust Downpipe, Cooling System,Gauges,Dicktator Management and Mapping...but before get my finances in order to do it, I'd like to know:
*What other mods should I do then?
(I'm currently planning to upgrade to Braided Brake Lines and EBC Yellow Brake Pads, Slotted and Drilled Rotors and Performance Brake Fluid for braking power. I currently have 35mm drop springs with 15 inch rims and a front UR Strut Bar but would like to add BC Coilovers and UR Rear sway bar).

If you guys have any other comments/suggestions, please let me know.

TIA
Rednaz is offline   Reply With Quote
Old 06-04-2015, 08:14 AM   #2
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,739
Quote:
Originally Posted by Rednaz View Post
If you guys have any other comments/suggestions, please let me know.
My only comment, GET IT DONE!. This is definitely something new and exciting in a community where nothing really different has been done in a very long time.
__________________
WeeYari is offline   Reply With Quote
Old 06-04-2015, 08:43 AM   #3
ilikerice
 
ilikerice's Avatar
 
Drives: 2010 black yaris
Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
Always skeptical when I see these posts.. I hope you go through with it. Like WeeYari said, we don't see much variety with these cars.

That is one hell of a price for a swap like that including parts. You are looking about that much for a turbo if you do all the labor. Supercharger alone cost that much too..
__________________
-Derrick-
"Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."
ilikerice is offline   Reply With Quote
Old 06-04-2015, 12:17 PM   #4
Jason@SportsCar
 
Drives: 2015 H Production Yaris
Join Date: Oct 2009
Location: Debary, FL
Posts: 1,953
Quote:
Originally Posted by Rednaz View Post
I've recently found a company in South Africa that can do the BEAMS conversion for R33 000 (that's roughly $3300). It includes: Engine,Gearbox with mountings, Exhaust Downpipe, Cooling System,Gauges,Dicktator Management and Mapping...but before get my finances in order to do it, I'd like to know:
*What other mods should I do then?
(I'm currently planning to upgrade to Braided Brake Lines and EBC Yellow Brake Pads, Slotted and Drilled Rotors and Performance Brake Fluid for braking power. I currently have 35mm drop springs with 15 inch rims and a front UR Strut Bar but would like to add BC Coilovers and UR Rear sway bar).

If you guys have any other comments/suggestions, please let me know.

TIA
Sounds like a great swap, legendary engine.

Slotted and drilled rotors are bling, they will crack, and do nothing to improving braking. Stick with OE style rotors. Spend the money on suspension instead.
__________________
2005-2008 SCCA Solo BS National Champion
2017-2018 SCCA H Prod National Champion
Jason@SportsCar is offline   Reply With Quote
Old 06-04-2015, 02:12 PM   #5
ilikerice
 
ilikerice's Avatar
 
Drives: 2010 black yaris
Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
+1 ^^^
__________________
-Derrick-
"Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."
ilikerice is offline   Reply With Quote
Old 06-04-2015, 02:56 PM   #6
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,739
Right now, I say focus your money and efforts on the Redtop and only the Redtop. Everything else is just icing and can wait for your bank account to recover.
__________________
WeeYari is offline   Reply With Quote
Old 06-04-2015, 09:01 PM   #7
Freestylin
 
Freestylin's Avatar
 
Drives: 09 Blizzard Pearl RS LB
Join Date: Sep 2009
Location: Calgary, Alberta
Posts: 371
Quote:
Originally Posted by WeeYari View Post
My only comment, GET IT DONE!. This is definitely something new and exciting in a community where nothing really different has been done in a very long time.
https://www.youtube.com/watch?v=nuHfVn_cfHU
__________________
“On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna
Freestylin is offline   Reply With Quote
Old 06-14-2015, 04:48 PM   #8
Rednaz
 
Drives: 2006 Yaris 1300
Join Date: Jan 2014
Location: Cape Town, RSA
Posts: 30
Thanks guys for the feedback and advice! Will keep you posted on this!!
Rednaz is offline   Reply With Quote
Old 07-17-2015, 12:26 PM   #9
Rednaz
 
Drives: 2006 Yaris 1300
Join Date: Jan 2014
Location: Cape Town, RSA
Posts: 30
Guys, a concern that someone told me today is that...my chassis might not be able to handle all the power..usually chassis is doublestitch to handle the strain that the motor puts on the body.
Rednaz is offline   Reply With Quote
Old 07-17-2015, 12:30 PM   #10
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,739
Quote:
Originally Posted by Rednaz View Post
Guys, a concern that someone told me today is that...my chassis might not be able to handle all the power..usually chassis is doublestitch to handle the strain that the motor puts on the body.
How much power are we actually talking about being achieved with this conversion?
__________________
WeeYari is offline   Reply With Quote
Old 07-17-2015, 12:37 PM   #11
brushforhire
 
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR
Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
I had no idea what a BEAMS redtop was, so this is what I came across in research.


BEAMS cost effective guide


About 200+ hp according to that site.
brushforhire is offline   Reply With Quote
Old 07-19-2015, 01:13 AM   #12
fnkngrv
Mr. 155 and climbing
 
fnkngrv's Avatar
 
Drives: Seriously Modded 07 Sedan
Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
How do you mean the chassis handling power? I was running 250 without upgraded mounts or an engine tq damper. The motor does move a lot. I am in the process of upgrading the dogbone to the TRD mount and am installing an engine damper I purchased. This will help protect the cv shafts. Plenty of fuya have run up to 270 or so whp without an issue.

Sent from my SCH-I545 using Tapatalk
__________________
Team Tiamat Racing on Facebook


Youtube Channel: Team Tiamat Racing


Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.
fnkngrv is offline   Reply With Quote
Old 07-20-2015, 06:08 AM   #13
Rednaz
 
Drives: 2006 Yaris 1300
Join Date: Jan 2014
Location: Cape Town, RSA
Posts: 30
@Weeyari: well stats show the engine puts out 210kw = Roughly 280bhp - (30% power loss from crank to wheels) so we talking about roughly 200whp.
Rednaz is offline   Reply With Quote
Old 07-20-2015, 06:23 AM   #14
Rednaz
 
Drives: 2006 Yaris 1300
Join Date: Jan 2014
Location: Cape Town, RSA
Posts: 30
@fnkngrv: I know it may sound abit like a noob question but I shared my conversion idea with my friends and that's the only objection they had as to why I shouldn't do the conversion but then again, cali yari was running 357whp and I don't recall him doing anything crazy to the chassis?
Rednaz is offline   Reply With Quote
Old 07-20-2015, 09:00 AM   #15
Betrivent
Not quite a noob
 
Betrivent's Avatar
 
Drives: e46 325
Join Date: Jul 2009
Location: edmonton
Posts: 1,408
I don't think anybody who adds a lot of power does anything to the chassis.
Betrivent is offline   Reply With Quote
Old 07-20-2015, 04:59 PM   #16
Rednaz
 
Drives: 2006 Yaris 1300
Join Date: Jan 2014
Location: Cape Town, RSA
Posts: 30
Like I'm saying guys, I'm just getting my facts in order..
Rednaz is offline   Reply With Quote
Old 07-20-2015, 06:24 PM   #17
justjesus
 
justjesus's Avatar
 
Drives: 2008 Liftback
Join Date: Oct 2008
Location: Orange County
Posts: 962
Quote:
Originally Posted by Rednaz View Post
@fnkngrv: ... cali yari was running 357whp and I don't recall him doing anything crazy to the chassis?
I believe he had TRD mounts, and a roll bar with cross bracing in the rear. I'm sure you can google and find plenty of pics of his car. But no, nothing too crazy with his chassis. AND he autoX'd it, as well as road raced it.
justjesus is offline   Reply With Quote
Old 10-26-2015, 12:26 PM   #18
Rednaz
 
Drives: 2006 Yaris 1300
Join Date: Jan 2014
Location: Cape Town, RSA
Posts: 30
Guys..a concern I have is braking power. What brake setup can I run to retain my 15 inch rims but still have decent stopping power for the BEAMS?
Rednaz is offline   Reply With Quote
Reply

Tags
beams, redtop, toyota

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Low beams & High beams on together? Deathegg DIY / Maintenance / Service 26 12-22-2018 10:19 PM
Problem with low beams and High Beams thebarbrr DIY / Maintenance / Service 7 09-22-2010 08:43 AM
Xenon-Vision HID Conversion Kit - $120 Shipped/$160 Shipped for Slim Ballast phu@xenon-vision Sponsors Classifieds Area 8 03-06-2009 02:33 PM


All times are GMT -4. The time now is 06:53 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.