2012 yaris SE TRD exhaust - Toyota Yaris Forums

bambam28 · 12-04-2012, 02:05 PM

Hi guys I have a 2012 yaris SE and I want to put an axleback on it. I was looking at the axleback on my yaris and it looks so similar to the one in the 2011. I was wondering if anyone knew if the TRD muffler for the 2011 can fit the axleback in my 2012. The thing is if I order it and doesnt fit I am stuck with it. Thanx guys

bambam28 · 12-04-2012, 05:55 PM

http://www.yarisworld.com/forums/sho...d.php?p=651442 According to this thread guys it says that it will fit!! Now the only thing I need is the height and wide off the tip of the trd exhaust muffler to see if it fits the diffuser of my SE. Thanks in advance for the measurements!!

bambam28 · 12-04-2012, 06:20 PM

http://www.yarisworld.com/forums/sho...d.php?p=651442 According to this thread guys it says that it will fit!! Now the only thing I need is the height and wide off the tip of the trd exhaust muffler to see if it fits the diffuser of my SE. Thanks in advance for the measurements!!

muffin_top · 12-07-2012, 08:02 PM

I have the '11 TRD axle back on my '12 SE, it does fit but the tip is about 2" lower than normal. It looks low, but sounds and fits well. The outlet is centered in the stock diffuser cutout.

I would really like to try the Tanabe Touring Medalion..

imike929 · 12-07-2012, 10:00 PM

hey muffin, about how much did that run you?

muffin_top · 12-08-2012, 12:01 PM

It's for sale for $200 :)

Have the carton, packing and hardware, as new. Has about 1,000 miles and three months use. Love it, just doing a full sound quality install so the fun exhaust has to go..

DJYojimbo · 12-08-2012, 02:31 PM

Muffin please let me know how the touring medalion fits your SE i'm planning on getting one too :)

muffin_top · 12-09-2012, 10:04 AM

Quote:

Originally Posted by DJYojimbo

Muffin please let me know how the touring medalion fits your SE i'm planning on getting one too :)

My only concern is the centering of the exit versus the cutout in the faux diffuser. Tanabe say that the test car they had was an L model as confirmed by the pics they posted on the website.

Ive been in contact with Tanabe and I'm trying to get them to send me a Touring Medalion to test its fitment.

We'll see!

DJYojimbo · 12-09-2012, 10:42 AM

I've been asking around here everyone said it should fit and kept saying i have an "SE" like yourself Thanks man!

DanMC · 12-09-2012, 10:49 AM

Quote:

Originally Posted by bambam28

Hi guys I have a 2012 yaris SE and I want to put an axleback on it. I was looking at the axleback on my yaris and it looks so similar to the one in the 2011. I was wondering if anyone knew if the TRD muffler for the 2011 can fit the axleback in my 2012. The thing is if I order it and doesnt fit I am stuck with it. Thanx guys

What do you mean by axleback ?...corect me if i'm wrong but you mean just the back part,muffler and tip only ?...i have heard "catback" catalitic converter back...and some of the guys said that 2011 fits 2012,good to know since our LE is an '12 but when times comes ...i kinda like Borla stuff,but that's just me.
Thanks
Dan

imike929 · 12-09-2012, 12:33 PM

Muffin, do you have any pictures as to compare the exit with the stock on my se? Also, how was the installation? I'm new to the car and yaris world so I'm getting ideas. Thanks!

bambam28 · 12-10-2012, 02:12 AM

http://www.yarisworld.com/forums/showthread.php?t=42846

Ok guys I posted the same thing in the performance forum and here is the link for all of you who are wondering what did I do? Well tomorrow I should have my axleback and hopefully installed if not then on tuesday...and for the question about the axleback...the axleback means that in the exhaust there is a conector in the axle in the back of the car, meaning you can change the muffler part from the axle in the rear to the back. I hope you understood what I am trying to say...

imike929 · 12-10-2012, 10:56 AM

BAMBAM, post some pics to help us out with our install! Thanks man

bambam28 · 12-10-2012, 07:35 PM

Hey guys I got my Exhaust today, disappointment, didn't fit, but I'll post some pics about it, tomorrow im going to a muffler shop so they can adapt it...here are the pics so yo can compare oem 2012 yaris SE and 2011 yaris liftback TRD exhaust. Also I took a pic when I installed it without any modifications... Ill get some more pics tomorrow!!!

imike929 · 12-10-2012, 07:49 PM

Thanks for the pics BamBam, so what part "didn't fit"? Or were you talking about the large gap in the last picture?

muffin_top · 12-10-2012, 08:11 PM

That is the same gap mine has. The clocking on his is off as well, the extra hangar that came with the kit was likely not on when the pic was taken. I had the same crooked tip until the extra hangar was fitted.

bambam28 · 12-10-2012, 08:23 PM

I really dont know what it was, the axleback was bolted and in the two oem hangers...maybe it was the one that i didnt put the extra one or maybe the curve on the pipe, but it was getting dark and I had a long way home so I decided to wait untill tomorrow. When I get to the muffler shop I will put some pics of what they did!!

Absolutely Red 12 · 12-10-2012, 10:27 PM

Looks like you dont need the middle hanger.
Is it hitting the chassis, keeping the rear hanger from pulling up properly??

12-04-2012, 02:05 PM	#1
bambam28 Drives: Yaris Hatchback 2012 SE Join Date: Aug 2011 Location: Puerto Rico Posts: 79	2012 yaris SE TRD exhaust Hi guys I have a 2012 yaris SE and I want to put an axleback on it. I was looking at the axleback on my yaris and it looks so similar to the one in the 2011. I was wondering if anyone knew if the TRD muffler for the 2011 can fit the axleback in my 2012. The thing is if I order it and doesnt fit I am stuck with it. Thanx guys

12-10-2012, 10:27 PM	#18
Absolutely Red 12 Asshole Drives: 2012 and 2013! Join Date: Aug 2012 Location: Your moms house. Posts: 392	Looks like you dont need the middle hanger. Is it hitting the chassis, keeping the rear hanger from pulling up properly?? __________________ Cheapest DD I could find!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
will 2010 Yaris wheels fit 2012 Yaris?	yaris8888	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	2	10-24-2012 11:36 PM
06-10 Yaris Sedan cold air intake $40	kylevh21	Items for Sale by private party	2	04-01-2012 02:14 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM

12-04-2012, 05:55 PM	#2
bambam28 Drives: Yaris Hatchback 2012 SE Join Date: Aug 2011 Location: Puerto Rico Posts: 79	http://www.yarisworld.com/forums/sho...d.php?p=651442 According to this thread guys it says that it will fit!! Now the only thing I need is the height and wide off the tip of the trd exhaust muffler to see if it fits the diffuser of my SE. Thanks in advance for the measurements!!

12-04-2012, 06:20 PM	#3
bambam28 Drives: Yaris Hatchback 2012 SE Join Date: Aug 2011 Location: Puerto Rico Posts: 79	http://www.yarisworld.com/forums/sho...d.php?p=651442 According to this thread guys it says that it will fit!! Now the only thing I need is the height and wide off the tip of the trd exhaust muffler to see if it fits the diffuser of my SE. Thanks in advance for the measurements!!

12-07-2012, 08:02 PM	#4
muffin_top Drives: 2012 Yaris SE 5MT Join Date: May 2012 Location: Midwest Posts: 103	I have the '11 TRD axle back on my '12 SE, it does fit but the tip is about 2" lower than normal. It looks low, but sounds and fits well. The outlet is centered in the stock diffuser cutout. I would really like to try the Tanabe Touring Medalion..

12-07-2012, 10:00 PM	#5
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	hey muffin, about how much did that run you?

12-08-2012, 12:01 PM	#6
muffin_top Drives: 2012 Yaris SE 5MT Join Date: May 2012 Location: Midwest Posts: 103	It's for sale for $200 :) Have the carton, packing and hardware, as new. Has about 1,000 miles and three months use. Love it, just doing a full sound quality install so the fun exhaust has to go..

12-08-2012, 02:31 PM	#7
DJYojimbo Drives: 2012 Grey Toyota Yaris SE Join Date: Dec 2011 Location: Chicago Posts: 261	Muffin please let me know how the touring medalion fits your SE i'm planning on getting one too :)

12-09-2012, 10:42 AM	#9
DJYojimbo Drives: 2012 Grey Toyota Yaris SE Join Date: Dec 2011 Location: Chicago Posts: 261	I've been asking around here everyone said it should fit and kept saying i have an "SE" like yourself Thanks man!

12-09-2012, 12:33 PM	#11
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	Muffin, do you have any pictures as to compare the exit with the stock on my se? Also, how was the installation? I'm new to the car and yaris world so I'm getting ideas. Thanks!

12-10-2012, 02:12 AM	#12
bambam28 Drives: Yaris Hatchback 2012 SE Join Date: Aug 2011 Location: Puerto Rico Posts: 79	http://www.yarisworld.com/forums/showthread.php?t=42846 Ok guys I posted the same thing in the performance forum and here is the link for all of you who are wondering what did I do? Well tomorrow I should have my axleback and hopefully installed if not then on tuesday...and for the question about the axleback...the axleback means that in the exhaust there is a conector in the axle in the back of the car, meaning you can change the muffler part from the axle in the rear to the back. I hope you understood what I am trying to say...

12-10-2012, 10:56 AM	#13
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	BAMBAM, post some pics to help us out with our install! Thanks man

12-10-2012, 07:35 PM	#14
bambam28 Drives: Yaris Hatchback 2012 SE Join Date: Aug 2011 Location: Puerto Rico Posts: 79	Hey guys I got my Exhaust today, disappointment, didn't fit, but I'll post some pics about it, tomorrow im going to a muffler shop so they can adapt it...here are the pics so yo can compare oem 2012 yaris SE and 2011 yaris liftback TRD exhaust. Also I took a pic when I installed it without any modifications... Ill get some more pics tomorrow!!!

12-10-2012, 07:49 PM	#15
imike929 Drives: '13 Super White SE Join Date: Apr 2012 Location: San Diego Posts: 60	Thanks for the pics BamBam, so what part "didn't fit"? Or were you talking about the large gap in the last picture?

12-10-2012, 08:11 PM	#16
muffin_top Drives: 2012 Yaris SE 5MT Join Date: May 2012 Location: Midwest Posts: 103	That is the same gap mine has. The clocking on his is off as well, the extra hangar that came with the kit was likely not on when the pic was taken. I had the same crooked tip until the extra hangar was fitted.

12-10-2012, 08:23 PM	#17
bambam28 Drives: Yaris Hatchback 2012 SE Join Date: Aug 2011 Location: Puerto Rico Posts: 79	I really dont know what it was, the axleback was bolted and in the two oem hangers...maybe it was the one that i didnt put the extra one or maybe the curve on the pipe, but it was getting dark and I had a long way home so I decided to wait untill tomorrow. When I get to the muffler shop I will put some pics of what they did!!