![]() |
![]()
![]() |
![]() |
#1 |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
Crank Pulley, TRD Sedan Exhaust, and more for sale - SoCal Local Pickup!
Finally starting to part out some things from my yaris. I've been putting it off cause my paypal account was closed a while back for unknown reasons
![]() Im located in Long Beach near the town center off the Carson/Lincoln exit on the 605. PM or TXT me anytime (and I really mean any time, i dont really care, its no bother to me at all) @ . Pickup can be scheduled at any time of day, 3am, 5pm, what ever time I dont care. I work, but you can stop by there for pickup as well. Just hit me up and we can work something out. Remember, cash only! :) *SOLD!!* TRD Exhaust - Its a little dirty and has some scratches on the bottom/lip, but no major dings. Instant bolt on, just reuse your existing exhaust bolts, hangers, and gasket and you're good to go! $200 Actual video of exhaust on my car with no other engine/exhaust mods - http://www.youtube.com/watch?v=fIG0OPV0Oog ![]() ![]() ![]() ![]() *SOLD!!* Aluminum Race Pedals - Auto Transmission Only - $20 ![]() *SOLD!!* 1zz Throttle Body with 1nz Chip - Ok, this worked perfectly fine on my car. It high idles at 3k on cold starts only and would instantly rev down. This process usually took 1 minute to complete. Thats normal from what I was told from other 1zz TB users on the forum. I took the rivets out and screwed on my 1nz chip (never tried the 1zz chip on it), and it ran perfectly fine with no CEL, never had a problem. I no longer have the 1zz chip for it, but will include my 1nz chip instead as pictured below. Also when I was removing the TB from my car I accidently cracked the opening a bit, but it should work and can be repaired with some jb weld or something. I'll include a 3/8" brass hose barb so you can do the coolant bypass as well! $20 ![]() ![]() Pioneer 6.5" Speakers (TS-A1673R) These are two different pairs of speakers. No box, with wires, no covers (i think i have them somewhere..), no screws. This was installed on my RX7 for 1 day and has about 5 minutes of play time. I decided to remove them cause they are installed above my adjustable coilovers. DOES NOT COME WITH THE BRACKETS IN THE PICTURE $10 ![]() Comes in box with all original hardware and covers. Never installed. $15 ![]() *SOLD!!* Resonant Engineering 10" Subwoofer - It still works, however there was a little tapping noise, but I think that might have been something rattling in the back of my car. Either way, its cheap and it works $10 ![]()
__________________
![]() OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header Last edited by eii; 08-12-2012 at 09:11 PM. |
![]() |
![]() |
![]() |
|
|