JDMAUTOLIGHTS - Toyota Yaris Forums

ACKING_QC · 05-02-2017, 07:13 PM

anyone actually ordered tail llights from them ? I see the website has a lot of sort of JDM lights for our cars but i don't think this website is legit......... any1 help ??

http://jdmautolights.com/tail-lights...81d31170803cb6

ACKING_QC · 05-04-2017, 05:44 PM

really ?? no one can answer me ??

Kalispel · 05-04-2017, 07:51 PM

I've seen that site up for years, but haven't ordered anything from them because all they sell are 2nd Gen Yaris accessories.

ACKING_QC · 05-04-2017, 09:11 PM

Quote:

Originally Posted by Kalispel

I've seen that site up for years, but haven't ordered anything from them because all they sell are 2nd Gen Yaris accessories.

and a shit ton of stuff for other cars.... I just want to know if the site is reliable because I need a replacement ASAP (one holding screw broke on left tail light... and water comes in the car...)

SirDigby · 05-05-2017, 08:46 PM

pay with paypal/credit card and you are covered up to $2000. don't be scared. i've almost ordered them a few times, but ended up finding them for cheaper on ebay one day...

ACKING_QC · 05-06-2017, 08:55 PM

Quote:

Originally Posted by SirDigby

pay with paypal/credit card and you are covered up to $2000. don't be scared. i've almost ordered them a few times, but ended up finding them for cheaper on ebay one day...

all I want is JDM looking tails lights ... I don't care if they aren't OEM in fact, I'd appreciate if they are Replicas with PROPER north american plugs

SirDigby · 05-06-2017, 10:08 PM

you just swap 2 wires. it's no big deal...

ACKING_QC · 05-07-2017, 06:07 PM

uh? I heard you had to remove the connector and redo the total sh!t ?

SirDigby · 05-08-2017, 01:03 PM

no. i believe you are just changing the position of the turn signal and reverse light. i might be wrong on the wire functions.
the connectors are the same. you only have to replace the connector if you damage it. if you using a simple terminal tool, or even a pick or a safety pin, you can remove the wires without damage to the connector and swap their positions. the connector is the same shape regardless of USDM/JDM/CDM/EDM/AusDM/AisaDM etc.

WeeYari · 05-08-2017, 02:16 PM

Quote:

Originally Posted by SirDigby

no. i believe you are just changing the position of the turn signal and reverse light. i might be wrong on the wire functions.

Correct.

Sent from my Elite_5_5_Octa using Tapatalk

ACKING_QC · 05-08-2017, 02:22 PM

well.... in that case I need to find a pair... for yesterday... I have water infiltration in my car and both my back seat AND @feet level of my back seat are suffering from this... I don't wnat my car to rust to death with all this water soo I need em' now... that's why I made the post on JDMAUTOLIGHTS.... but if you have another place that is WAY CHEAPER ... used or not i don't care... as long as no more water enters my car ..........

SirDigby · 05-08-2017, 07:30 PM

i got mine on ebay. otherwise i was going to order them from jdmautolights

ACKING_QC · 05-09-2017, 08:50 AM

Quote:

Originally Posted by SirDigby

i got mine on ebay. otherwise i was going to order them from jdmautolights

spotted a pair.. 411$ CA...

on JDMAuto I can have a set of ambre red ones for 235$.. problem is, I DFK if the website is legit.. I guess someones gotta sacrifice itself... I'll wait for my next paycheck to test that and see if I got them :)

WeeYari · 05-09-2017, 10:06 AM

Quote:

Originally Posted by ACKING_QC

I DFK if the website is legit.. I guess someones gotta sacrifice itself...

Why the f**k do you keep chirping about the site being legit or not? It is.

Keep in mind that of the 8 products listed in your link a few post back, only 1 is actual OEM Toyota. The other 7 are replicas, and hence subject to inherent replica fitment issues.

ACKING_QC · 05-09-2017, 01:02 PM

Quote:

Originally Posted by WeeYari

Why the f**k do you keep chirping about the site being legit or not? It is.

Keep in mind that of the 8 products listed in your link a few post back, only 1 is actual OEM Toyota. The other 7 are replicas, and hence subject to inherent replica fitment issues.

HEY! not everyone has 400$ to put up on tail lights and can going away with STILL some money on their pocket ... it is normal to have some doubts about a thing NO ONE ever talked about on this forum......

WeeYari · 05-09-2017, 01:37 PM

I've been on hand for a couple of replica installs over the years and I don't recall needing to do a pin swap on the connectors. OEM RS lights yes need wiring changes, replica no.

Sent from my Elite_5_5_Octa using Tapatalk

SirDigby · 05-10-2017, 12:36 AM

also i have read something about them not having reflectors, since the bumper has them in Japan. you might need to install some reflectors on your car with the replicas if you are worried. idk if the factory ones have them, i would assume so, but i have not checked...

ACKING_QC · 05-10-2017, 07:34 AM

Quote:

Originally Posted by SirDigby

also i have read something about them not having reflectors, since the bumper has them in Japan. you might need to install some reflectors on your car with the replicas if you are worried. idk if the factory ones have them, i would assume so, but i have not checked...

do you seriously think i care about that ? heck even Quebec police don't care about it !

05-02-2017, 07:13 PM	#1
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	JDMAUTOLIGHTS anyone actually ordered tail llights from them ? I see the website has a lot of sort of JDM lights for our cars but i don't think this website is legit......... any1 help ?? http://jdmautolights.com/tail-lights...81d31170803cb6

05-09-2017, 01:37 PM	#16
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,740	I've been on hand for a couple of replica installs over the years and I don't recall needing to do a pin swap on the connectors. OEM RS lights yes need wiring changes, replica no. Sent from my Elite_5_5_Octa using Tapatalk __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-04-2017, 05:44 PM	#2
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	really ?? no one can answer me ??

05-04-2017, 07:51 PM	#3
Kalispel View User's Garage Drives: '15 Yaris SE 5MT Join Date: Jun 2014 Location: Arizona (USA) Posts: 1,058	I've seen that site up for years, but haven't ordered anything from them because all they sell are 2nd Gen Yaris accessories.

05-05-2017, 08:46 PM	#5
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	pay with paypal/credit card and you are covered up to $2000. don't be scared. i've almost ordered them a few times, but ended up finding them for cheaper on ebay one day...

05-06-2017, 10:08 PM	#7
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	you just swap 2 wires. it's no big deal...

05-07-2017, 06:07 PM	#8
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	uh? I heard you had to remove the connector and redo the total sh!t ?

05-08-2017, 01:03 PM	#9
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	no. i believe you are just changing the position of the turn signal and reverse light. i might be wrong on the wire functions. the connectors are the same. you only have to replace the connector if you damage it. if you using a simple terminal tool, or even a pick or a safety pin, you can remove the wires without damage to the connector and swap their positions. the connector is the same shape regardless of USDM/JDM/CDM/EDM/AusDM/AisaDM etc.

05-08-2017, 02:22 PM	#11
ACKING_QC ManualTransmissionLearner View User's Garage Drives: 2018 VW TSi Stage1 Join Date: Jun 2016 Location: QC, Canada Posts: 233	well.... in that case I need to find a pair... for yesterday... I have water infiltration in my car and both my back seat AND @feet level of my back seat are suffering from this... I don't wnat my car to rust to death with all this water soo I need em' now... that's why I made the post on JDMAUTOLIGHTS.... but if you have another place that is WAY CHEAPER ... used or not i don't care... as long as no more water enters my car ..........

05-08-2017, 07:30 PM	#12
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	i got mine on ebay. otherwise i was going to order them from jdmautolights

05-10-2017, 12:36 AM	#17
SirDigby View User's Garage Drives: 2007 yaris 3 door Join Date: Sep 2015 Location: Denver, Colorado Posts: 1,000	also i have read something about them not having reflectors, since the bumper has them in Japan. you might need to install some reflectors on your car with the replicas if you are worried. idk if the factory ones have them, i would assume so, but i have not checked...