Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Marketplace > Willing to Buy by private party
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 04-25-2016, 07:14 PM   #1
echo-francis
 
Drives: toyota echo
Join Date: Jun 2013
Location: Canada
Posts: 21
WTB: Tooter manifold spacer

WTB: Tooter manifold spacer
echo-francis is offline   Reply With Quote
Old 04-28-2016, 06:39 PM   #2
echo-francis
 
Drives: toyota echo
Join Date: Jun 2013
Location: Canada
Posts: 21
bump
echo-francis is offline   Reply With Quote
Old 05-20-2016, 01:45 PM   #3
echo-francis
 
Drives: toyota echo
Join Date: Jun 2013
Location: Canada
Posts: 21
bump
echo-francis is offline   Reply With Quote
Old 07-27-2016, 11:10 AM   #4
echo-francis
 
Drives: toyota echo
Join Date: Jun 2013
Location: Canada
Posts: 21
bump
echo-francis is offline   Reply With Quote
Old 07-27-2016, 11:31 AM   #5
CrankyOldMan
2ZR swap. DO IT! Ask how!
 
CrankyOldMan's Avatar
 
Drives: 09 Meteoric Metallic HB
Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
I think about the best you could do at this point would be to make (or have made) a one-off. I posted a measured drawing of the intake flange that (I think) was the basis for the Tooter spacer, as well as the Tooter manifold. If you want CAD data, I can probably provide that as well.
CrankyOldMan is offline   Reply With Quote
Old 07-28-2016, 10:20 AM   #6
malibuguy
Obsessed with 1.5L
 
Drives: '10 PW Yaris Sedan
Join Date: Feb 2011
Location: Westminster, MD
Posts: 907
I may be willing to sell mine. Was thinking of taking it off when i fab the turbo system up
__________________
-Greg...the Exhaust Freak.

-10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD
-06 Highlander 3mzfe Limited AWD
-82 Malibu, 1uzfe swap
-97 Tercel coupe, 1nzfe/4.31
-96 Tercel coupe, Turbo 5efe, autoX
-96 Tercel 4dr
malibuguy is offline   Reply With Quote
Old 07-28-2016, 09:58 PM   #7
Turk188
 
Drives: 2016 Yaris 3 door
Join Date: Jul 2016
Location: Alabama
Posts: 13
@ CrankyOldMan - do you think you could design an adapter to bolt a stock 4 bolt TB to an 07 scion xb intake manifold? Any thoughts on a 3D print in abs, I'm not using forced air.

Please correct me if I'm wrong but in 07 the xB came with the 1nz but a different TB. I can find manifolds for the xB but having trouble finding one for a yaris.
I know it's only a handful of HP if any.
Turk188 is offline   Reply With Quote
Old 07-28-2016, 10:19 PM   #8
NYC-SE
 
NYC-SE's Avatar
 
Drives: 2014 Yaris SE
Join Date: Apr 2014
Location: NYC
Posts: 1,076
[QUOTE=Turk188;784285Please correct me if I'm wrong but in 07 the xB came with the 1nz but a different TB.[/QUOTE]

I believe the 1NZ-FE was only in the 2004-2006 xB.
NYC-SE is offline   Reply With Quote
Old 07-29-2016, 11:19 PM   #9
Turk188
 
Drives: 2016 Yaris 3 door
Join Date: Jul 2016
Location: Alabama
Posts: 13
@ NYC-SE thank you for the correction. I've seen xb manifolds with three bolts but when I looked at the 06 it has 4 like the yaris TB. Has anyone tried one for fit to a stock TB or one off a Corolla 1/2 ZZ? I'm just guessing that I'm not the first to think of this but I haven't seen anyone say if they tried it.
Turk188 is offline   Reply With Quote
Old 07-30-2016, 08:52 AM   #10
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,739
Quote:
Originally Posted by Turk188 View Post
Has anyone tried one for fit to a stock TB or one off a Corolla 1/2 ZZ? I'm just guessing that I'm not the first to think of this but I haven't seen anyone say if they tried it.
Many 1ZZ throttle body swaps have been done. Search it out!

As for 2ZZ, I believe the issue is the need to convert from drive-by-wire to throttle cable setup.
__________________
WeeYari is offline   Reply With Quote
Old 07-30-2016, 10:05 AM   #11
CrankyOldMan
2ZR swap. DO IT! Ask how!
 
CrankyOldMan's Avatar
 
Drives: 09 Meteoric Metallic HB
Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
Quote:
Originally Posted by Turk188 View Post
@ CrankyOldMan - do you think you could design an adapter to bolt a stock 4 bolt TB to an 07 scion xb intake manifold? Any thoughts on a 3D print in abs, I'm not using forced air.
Possibly, but I'd need accurate dimensions from the xB components.

I would avoid a 3D printed adapter, unless you're having it made by someone that specializes in functional components. I've seen too many projects where someone used an inexpensive printer, didn't understand how to setup the parameters, and got a result that mechanically failed in short order. If you're just testing fit and dimensions, I think you'd be OK, but for actual use you'd want something machined from a solid block. The mating surfaces have to be solid enough to seal with a gasket, otherwise you'll have AFR issues and rough idle.
CrankyOldMan is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Micro Image/Golden Eagle Intake Manifold Review tmontague Performance Modifications 18 01-03-2017 08:24 PM
FS: tooter I.V 2 inch thick intake manifold spacer tooter Items for Sale by private party 115 03-08-2016 07:02 PM
WTB 1nz tooter intake manifold clay6316 Willing to Buy by private party 2 01-14-2016 11:41 PM
FS: ONE discounted tooter I.V intake manifold spacer... tooter Items for Sale by private party 8 03-04-2014 01:21 AM
Tooter manifold / Corolla TB / DC Header / etc.... 3cyltrbo Performance Modifications 79 10-08-2013 01:53 AM


All times are GMT -4. The time now is 10:02 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.