![]() |
![]()
![]() |
![]() |
#1 |
![]() ![]() Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
N/A setup
Il want to do this tread for compare all N/A setup.
My yaris setup: 1zz TB 1zz injector Borla axel back ( TRD parts ) Home made 2.5 inchs cold air intake I want to install a free flow catalitic convertor and a 2 inchs exhaust 16 inchs DAI light wight Eiback coil spring Trd rear sway bar I need some idea for my project. Tanks! |
![]() |
![]() |
![]() |
#2 |
daily driver
|
2.5" intake is too big, won't work with the MAF
forget the axleback and get a custom-made exhaust from the resonator back. the cats and resonator are 2" thru and the exhaust shrinks to 1.75" after the resonator. i had mine replaced last week....its worth the effort. skip the high flow cat, not worth the time/effort. get a dc header because all the other headers are junk nst underdrive crank pulley and lightweight water pump and alternator 1zz throttle body is ok 1zz injectors not likely req'd for n/a setup wait for cali_yaris's intake manifold get lightweight 15" rims, skip the 16's
__________________
![]() |
![]() |
![]() |
![]() |
#3 |
![]() ![]() Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
Tanks, but for de 2.5 intake, I have buy a fiting for this. I ajust the diameter for the MAF!
http://www.sfxperformance.com/parts/SPT9405.htm For the cat hi flow, this is because I got one at the past and it is in my room! tanks for your help! |
![]() |
![]() |
![]() |
#4 | |
![]() ![]() ![]() ![]() Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Quote:
Hehe learnt some new info. ![]()
__________________
![]() Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() ![]() Drives: jdm yaris sedan Join Date: Feb 2009
Location: bayamon puerto rico
Posts: 433
|
wat i did is from the maf to the throttel. is put 2 inch tube and from the maf to the fog light 3 inches is kind of wat the aem v2 intake does
__________________
vvti bregao! |
![]() |
![]() |
![]() |
#6 |
![]() ![]() Drives: 2008 Yaris S LB - MM Join Date: Aug 2009
Location: Kansas City, MO
Posts: 103
|
About 3 or 4 weeks ago, I tried to do a DIY axleback and failed miserable, because I read many times on the forum that our stock axleback exhaust pipe diameter was 1.75", but it's actually smaller than that. I measured a 1 3/8" ID for the piping just before it enters the muffler. I have an '08 Yaris 'S', but It should not be different than any other Yaris hatchback.
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
The 1nz-fe have a 11:1 compression ratio but the prius have a 13:1 compression ratio. What is the different? Piston or culass (head) ...
Because I think that for the N/A setup, if we boost the compression ratio, we can win 10 hp... maybe!?!? |
![]() |
![]() |
![]() |
#8 | |
Your mom goes to college
Drives: 08 Vitz Join Date: Oct 2008
Location: Just chillin' out brah !
Posts: 1,434
|
Quote:
|
|
![]() |
![]() |
![]() |
#9 | |
1NZ-FE
|
Quote:
![]()
__________________
. ![]() DC Sports Header, Vibrant Hi-Flow Cat, Round Magnaflow Muffler, Vibrant Tip, Dunlop Direzza 195/50 Rims 15", Injen Technologies Cold Air Intake, NST CR-Lite crank, waterpump & alternator pulleys, Tanabe NF210 Springs, NST SSK 1 & 2, NST Shifter Cable & Cage Bushing Kit, Nitto Engine Torque Damper ![]() |
|
![]() |
![]() |
![]() |
#10 | |
Start another Oil Thread!
|
no...
__________________
Quote:
![]() |
|
![]() |
![]() |
![]() |
#11 | |
daily driver
|
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#12 | |
![]() Drives: 2005 Scion xB Join Date: Nov 2008
Location: Walton, Kentucky
Posts: 10
|
Quote:
I personally wanna see this done, I just don't have the money to do it right now since I'm building an S13. |
|
![]() |
![]() |
![]() |
#13 | ||
Start another Oil Thread!
|
Quote:
__________________
Quote:
![]() |
||
![]() |
![]() |
![]() |
#14 |
Slowy getting there
|
Tamago didn't you look up the piston part number and they were different?
__________________
|
![]() |
![]() |
![]() |
#15 |
![]() Drives: 2005 Scion xB Join Date: Nov 2008
Location: Walton, Kentucky
Posts: 10
|
Very true. I just looked everything back up.
The extra compression appears to come from the different pistons, no? Someone on scionlife saw gains with 11:1 pistons and an emanage tune. http://scionlife.com/forums/showthread.php?t=65124 |
![]() |
![]() |
![]() |
#16 |
![]() ![]() Drives: Yaris 08 Join Date: Mar 2009
Location: Québec
Posts: 104
|
Ho yeah, I have read this. 13 WHP with prius piston and e-menage. I will look for this !!!!!
|
![]() |
![]() |
![]() |
#17 |
![]() ![]() ![]() ![]() |
|
![]() |
![]() |
![]() |
#18 | |
![]() ![]() ![]() ![]() ![]() Drives: car Join Date: Oct 2008
Location: location
Posts: 1,033
|
Quote:
Is there any other exhaust piping that needs to be increased to 2" besides the resonator-to-muffler piping? Also if you're running an axleback already would it be easy to go to a muffler shop and have them convert from an axleback to a catback? |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
My suspension setup: Breakfast Blend for the angry panda | Tamago | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 57 | 07-26-2010 03:56 PM |
Warranty Information for US Yaris Owners | AdeJong 03 | General Yaris / Vitz Discussion | 4 | 09-19-2009 10:14 PM |
Works bell/Nardi quick release steering wheel setup | blacksandiegovitz | Cosmetic Modifications (Exterior/Interior) | 35 | 09-02-2009 05:52 PM |
good speaker setup. | ryota | In Car Entertainment + Electronics (audio / video / alarm) | 18 | 08-08-2009 07:46 PM |
Suspension Setup Question | Ran Kizama | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 27 | 04-28-2007 02:05 PM |