Car Radio for 2008 Yaris Sedan Question - Page 2 - Toyota Yaris Forums

taxi142 · 08-18-2009, 04:21 PM

Hey guys i just ordered that part from toyota. man i've been searching for it 4ever THANK YOU THANK YOU ALL!

taxi142 · 08-18-2009, 04:23 PM

Quote:

Originally Posted by CTScott

OK. I finally found it in the EPC:

It is really called: Panel Sub-Assy, Instrument Cluster Finish, Center
It's part number is: 55405-52790

Here's the picture from the EPC:

just one more question on that would i need to buy the trim kit still?which is this " TA1465B "?

CTScott · 08-18-2009, 04:38 PM

You will still need the trim kit, such as the Scosche TA1465B. It is not pictured, because it is not a Toyota part. The Toyota part that you ordered allows a Toyota radio to be mounted in place of the one you had. The Toyota radios are 20mm wider than standard DIN width, so the Scosche or Metra trim kit fills the gap for mounting a normal double DIN radio. You will also need the harness adapter (Scosche, Metra, etc), if you want to wire your new radio without cutting off the OEM connectors.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
Stupid question about installing a radio	fmicle	In Car Entertainment + Electronics (audio / video / alarm)	6	05-26-2007 04:20 PM
New car shopping - long post	littlecarlove	General Yaris / Vitz Discussion	19	11-01-2006 10:58 PM

08-18-2009, 04:21 PM	#19
taxi142 Drives: Toyota Yaris 2007 4 door Join Date: Aug 2009 Location: Cincinnati Oh Posts: 4	Hey guys i just ordered that part from toyota. man i've been searching for it 4ever THANK YOU THANK YOU ALL!

08-18-2009, 04:38 PM	#21
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	You will still need the trim kit, such as the Scosche TA1465B. It is not pictured, because it is not a Toyota part. The Toyota part that you ordered allows a Toyota radio to be mounted in place of the one you had. The Toyota radios are 20mm wider than standard DIN width, so the Scosche or Metra trim kit fills the gap for mounting a normal double DIN radio. You will also need the harness adapter (Scosche, Metra, etc), if you want to wire your new radio without cutting off the OEM connectors.