Aeroover Kit... - Toyota Yaris Forums

ItsMyDaily · 09-19-2006, 05:23 PM

I'm looking into purchasing this lip kit for my Yaris. However I was wondering if anyone knew if it would work for the US models. The front lip and rear lip seem like they would fit well, maybe with a few tweaks. However the sde steps are what confuse me. Is the lenght of the US(two door) shorter then the four door Yaris's out there? any help appreciated.

I think this is the cleanest kit available for the car at the moment.

tca4 · 09-19-2006, 08:09 PM

if you want JDM sidesskirt it wont fit the US two doors since Japan only have 4 doors

ItsMyDaily · 09-19-2006, 08:19 PM

Quote:

Originally Posted by tca4

if you want JDM sidesskirt it wont fit the US two doors since Japan only have 4 doors

I figured that, but was curious about the corner lenght of both the 2-door and 4-door versions of the car. If the difference is minimal then maybe only minor modifications are needed in order to get the sides to fit correctly.

Other then the sides giving a problem, anyone know if there are any difference between the front, and rear bumpers? I don't see any.

raz0rbladez909 · 09-19-2006, 08:39 PM

i wouldnt be too sure on that considering the wheelbase is the same length usually when we get the coupe version it is the same length as the 4 door but the doors are smaller on the 4 door. I.E. the impreza used to come in a 2 and 4 door version yet you could use the same kits for each one, i'd say search up some more for the exact answer because just from looking at pictures you can tell the doors on the japanese vitz and the u.s. yaris are different in sizes, it wouldnt be cost effective for them to produce two different length chassis just to add more doors we'll good luck

SimmZ · 09-19-2006, 08:50 PM

ItsMyDaily · 09-19-2006, 10:01 PM

Quote:

Originally Posted by SimmZ

this is from bulletproof site, hope they don't mind...

johnnyfive · 09-19-2006, 10:28 PM

that kit does look nice, and i dont think they will mind any free advertising ;)

so for not having anything constructive to add to the thread...

SimmZ · 09-19-2006, 10:32 PM

Look nice, I especially like the dual output exhaust! hehe.

ItsMyDaily · 09-19-2006, 10:48 PM

Quote:

Originally Posted by johnnyfive

that kit does look nice, and i dont think they will mind any free advertising ;)

so for not having anything constructive to add to the thread...

your right they probably won't mind free ads. nothing to be sorry for, you gave me a bump

03Z33 · 09-19-2006, 11:04 PM

Actually the sides do fit. The front is not for sure, but will most likely fit fine.

The rear will not fit the USDM rear bumper, it sticks out more than the JDM bumber.

OxyG3nE · 09-20-2006, 05:10 PM

we need to wait someone try it haha :p

ItsMyDaily · 09-20-2006, 06:21 PM

Quote:

Originally Posted by OxyG3nE

we need to wait someone try it haha :p

I may be the one to try it

but i'll wait a bit to see what companies bring out for the US spec first before I jump on this kit.

FoEKuZ · 09-20-2006, 07:08 PM

Quote:

Originally Posted by ItsMyDaily

I may be the one to try it

but i'll wait a bit to see what companies bring out for the US spec first before I jump on this kit.

shoot, ill jump on it too...this kits nice

OxyG3nE · 09-20-2006, 10:43 PM

i really want it too... but not if it need fitting.. and i have winter here.. would be funny in the snow haha :p

mhero · 09-20-2006, 11:25 PM

The pix are from K-factory .. japan

Here is my AeroOver
http://www.yarismaniac.com/index.php?showtopic=282

ItsMyDaily · 09-21-2006, 12:23 AM

Quote:

Originally Posted by mhero

The pix are from K-factory .. japan

Here is my AeroOver
http://www.yarismaniac.com/index.php?showtopic=282

wow that looks amazing. Love the kit even more now.

badhabitz · 09-21-2006, 03:25 AM

the sides will fit with some mods done and the front all i know was people using the c one kits but it was the full bumpers and those fit too but from wat i know they had to cut the reinforcement bars

09-19-2006, 05:23 PM	#1
ItsMyDaily The LittleBastard View User's Garage Drives: 2007 Yaris Liftback Join Date: Sep 2006 Location: Los Angeles, CA Posts: 297	Aeroover Kit... I'm looking into purchasing this lip kit for my Yaris. However I was wondering if anyone knew if it would work for the US models. The front lip and rear lip seem like they would fit well, maybe with a few tweaks. However the sde steps are what confuse me. Is the lenght of the US(two door) shorter then the four door Yaris's out there? any help appreciated. I think this is the cleanest kit available for the car at the moment. __________________ Yaris Mods: 20% Tints Ground wires 2007 Toyota Yaris Liftback - Current 2004 Honda S2000 - Sold 1986 Toyota Corolla SR5 - Sold DIY: Groundwire Kit

09-19-2006, 08:50 PM	#5
SimmZ Drives: 2k3 Cavalier & 2k2 Echo Join Date: Aug 2006 Location: Quebec Posts: 260	__________________ 2003 Chevy Cavalier Ecotec - His car! 2002 Toyota Echo Sedan - Her car... FOR SALE!

09-19-2006, 10:32 PM	#8
SimmZ Drives: 2k3 Cavalier & 2k2 Echo Join Date: Aug 2006 Location: Quebec Posts: 260	Look nice, I especially like the dual output exhaust! hehe. __________________ 2003 Chevy Cavalier Ecotec - His car! 2002 Toyota Echo Sedan - Her car... FOR SALE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale: Lexus GS Parts - L-Tuned Body Kit, TRD Strut Tower bar, 18"StaggeredWheels.	TRD_Yaris	Items for Sale by private party	6	05-06-2010 06:43 PM
Is aftermarket HID kit legal (in NJ)?	Jfoofoo	Cosmetic Modifications (Exterior/Interior)	25	03-19-2009 02:05 PM
Yaris needed for bodykit design = FREE KIT!	BenDF	California	5	06-27-2007 06:40 PM
Interior Light Kit... for Canadian version?!	Jem_hadar	Cosmetic Modifications (Exterior/Interior)	5	08-17-2006 02:20 AM
Any front bumper/ hood stone chip issues? Where could I get Clear Bra kit?	tifosi360	General Yaris / Vitz Discussion	9	08-07-2006 02:43 PM

09-19-2006, 08:09 PM	#2
tca4 View User's Garage Drives: Yaris RS (white) Join Date: May 2006 Location: Delta,BC Posts: 502	if you want JDM sidesskirt it wont fit the US two doors since Japan only have 4 doors

09-19-2006, 08:39 PM	#4
raz0rbladez909 Drives: 3 door yaris Join Date: Jul 2006 Location: Norfolk, VA Posts: 17	i wouldnt be too sure on that considering the wheelbase is the same length usually when we get the coupe version it is the same length as the 4 door but the doors are smaller on the 4 door. I.E. the impreza used to come in a 2 and 4 door version yet you could use the same kits for each one, i'd say search up some more for the exact answer because just from looking at pictures you can tell the doors on the japanese vitz and the u.s. yaris are different in sizes, it wouldnt be cost effective for them to produce two different length chassis just to add more doors we'll good luck

09-19-2006, 10:28 PM	#7
johnnyfive Drives: 2007 Yaris S Join Date: May 2006 Location: Milwaukee WI Posts: 582	that kit does look nice, and i dont think they will mind any free advertising ;) so for not having anything constructive to add to the thread...

09-19-2006, 11:04 PM	#10
03Z33 View User's Garage Drives: TCR10 Join Date: Jun 2006 Location: SoCal Posts: 1,132	Actually the sides do fit. The front is not for sure, but will most likely fit fine. The rear will not fit the USDM rear bumper, it sticks out more than the JDM bumber.

09-20-2006, 05:10 PM	#11
OxyG3nE Drives: Toyota Yaris 2007 Join Date: Jul 2006 Location: Montreal , Quebec , Canada Posts: 373	we need to wait someone try it haha :p

09-20-2006, 10:43 PM	#14
OxyG3nE Drives: Toyota Yaris 2007 Join Date: Jul 2006 Location: Montreal , Quebec , Canada Posts: 373	i really want it too... but not if it need fitting.. and i have winter here.. would be funny in the snow haha :p

09-20-2006, 11:25 PM	#15
mhero Drives: Yaris 5Dr. Join Date: Sep 2006 Location: Thailand Posts: 82	The pix are from K-factory .. japan Here is my AeroOver http://www.yarismaniac.com/index.php?showtopic=282

09-21-2006, 03:25 AM	#17
badhabitz Drives: yaris Join Date: Jul 2006 Location: california Posts: 38	the sides will fit with some mods done and the front all i know was people using the c one kits but it was the full bumpers and those fit too but from wat i know they had to cut the reinforcement bars