Looking for an aftermarket exhaust that isn't much louder than stock! - Toyota Yaris Forums

firebird1999us · 08-06-2014, 08:18 AM

The stock muffler looks nasty and I hate the crappy little tail pipe. I daily drive the car and don't want to annoy the neighbors...

I came across the Tanabe Medallion Touring and it seems to be on the quieter side of aftermarket mufflers. The youtoube clips make it sound just a bit louder than stock but smoother. What else is out there that's comparable and isn't a full on can of angry bees?

IllusionX · 08-06-2014, 08:40 AM

Install a 4" muffler tip?

firebird1999us · 08-06-2014, 09:50 AM

^^^Want to ditch the rusty muffler too and am fine with a touch louder and smoother. So that's my criteria;)

KCALB SIRAY · 08-06-2014, 10:00 AM

I have a Blitz Nur Spec S. Quiet, smooth and throaty when laid into but not loud.

kou · 08-06-2014, 02:00 PM

Dynamax super turbo muffler.

Rakin · 08-06-2014, 02:44 PM

How much louder are Magnaflow chambered mufflers over stock?

ivanstepul · 08-07-2014, 01:10 AM

rock auto axle back

tooter · 08-07-2014, 01:22 AM

At only $50, the price is right.

And you could always add a custom tip to it.

Greg

firebird1999us · 08-11-2014, 11:58 AM

Went with Fujitsubo Wagolis I was able to find used in excellent condition for a good price from a fellow forumite

crazylegs · 08-12-2014, 01:48 PM

Quote:

Originally Posted by tooter

At only $50, the price is right.

And you could always add a custom tip to it.

Greg

what's that thing sound like? and how big is the pipe? when i told the wife i might mod my new car just so i would have some level of pride in the little turd here first concern ws to make sure i didn't make it louder lol

IllusionX · 08-12-2014, 03:03 PM

Quote:

Originally Posted by crazylegs

what's that thing sound like? and how big is the pipe? when i told the wife i might mod my new car just so i would have some level of pride in the little turd here first concern ws to make sure i didn't make it louder lol

LOL that one is spec'd the same as OEM.

crazylegs · 08-12-2014, 05:13 PM

Ahh lol

firebird1999us · 08-13-2014, 01:39 AM

Anyone have any suggestions on muffler hangers? I know the exhaust I bought is very snug and can rub the stock oem bumper... I was thinking about swapping out the hangers with the ones micro image sells but wasn't sure on the spacing I needed to go with?

http://shop.microimageonline.com/Ure...H-urethane.htm

What are the stock muffler hanger dimensions so I have a point of comparison?

ezhacker1 · 08-13-2014, 10:47 AM

I measured a stock exhaust hanger for you. With no weight pulling on it, it measures 27mm from the center of two holes. And the holes measure just about 20mm.

firebird1999us · 08-14-2014, 03:30 PM

Direct from Connecticut!

tooter · 08-15-2014, 01:35 AM

Oooo... nice.

It should be extra deep with that longer pipe looping around from the back of the muffler.

Greg

malibuguy · 08-15-2014, 06:45 AM

You could bend that last hanger rod a smidge to drop the tip to clear the bumper

08-06-2014, 08:18 AM	#1
firebird1999us Drives: 2003 Mach 1 Join Date: Oct 2008 Location: Georgia Posts: 293	Looking for an aftermarket exhaust that isn't much louder than stock! The stock muffler looks nasty and I hate the crappy little tail pipe. I daily drive the car and don't want to annoy the neighbors... I came across the Tanabe Medallion Touring and it seems to be on the quieter side of aftermarket mufflers. The youtoube clips make it sound just a bit louder than stock but smoother. What else is out there that's comparable and isn't a full on can of angry bees?

08-06-2014, 08:40 AM	#2
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	Install a 4" muffler tip? __________________

08-06-2014, 10:00 AM	#4
KCALB SIRAY それを吸ってください View User's Garage Drives: black sand lb Join Date: Oct 2008 Location: Virginia Posts: 8,894	I have a Blitz Nur Spec S. Quiet, smooth and throaty when laid into but not loud. __________________ http://lifesdailypimpslap.tumblr.com/#me My Build

08-13-2014, 10:47 AM	#14
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	I measured a stock exhaust hanger for you. With no weight pulling on it, it measures 27mm from the center of two holes. And the holes measure just about 20mm. __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

08-15-2014, 06:45 AM	#17
malibuguy Obsessed with 1.5L Drives: '10 PW Yaris Sedan Join Date: Feb 2011 Location: Westminster, MD Posts: 907	You could bend that last hanger rod a smidge to drop the tip to clear the bumper __________________ -Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr

08-06-2014, 09:50 AM	#3
firebird1999us Drives: 2003 Mach 1 Join Date: Oct 2008 Location: Georgia Posts: 293	^^^Want to ditch the rusty muffler too and am fine with a touch louder and smoother. So that's my criteria;)

08-06-2014, 02:00 PM	#5
kou View User's Garage Drives: 08 lb Join Date: Aug 2007 Location: nj Posts: 935	Dynamax super turbo muffler.

08-06-2014, 02:44 PM	#6
Rakin Drives: Toyota Premio NZT240 Join Date: Jul 2014 Location: Bangladesh Posts: 23	How much louder are Magnaflow chambered mufflers over stock?

08-07-2014, 01:10 AM	#7
ivanstepul Drives: 08 hatchback Join Date: Jun 2011 Location: chicago Posts: 85	rock auto axle back

08-07-2014, 01:22 AM	#8
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,961	At only $50, the price is right. And you could always add a custom tip to it. Greg

08-11-2014, 11:58 AM	#9
firebird1999us Drives: 2003 Mach 1 Join Date: Oct 2008 Location: Georgia Posts: 293	Went with Fujitsubo Wagolis I was able to find used in excellent condition for a good price from a fellow forumite

08-12-2014, 05:13 PM	#12
crazylegs Drives: 2007 Yaris Join Date: Aug 2014 Location: Winnipeg, canada Posts: 59	Ahh lol

08-13-2014, 01:39 AM	#13
firebird1999us Drives: 2003 Mach 1 Join Date: Oct 2008 Location: Georgia Posts: 293	Anyone have any suggestions on muffler hangers? I know the exhaust I bought is very snug and can rub the stock oem bumper... I was thinking about swapping out the hangers with the ones micro image sells but wasn't sure on the spacing I needed to go with? http://shop.microimageonline.com/Ure...H-urethane.htm What are the stock muffler hanger dimensions so I have a point of comparison?

08-14-2014, 03:30 PM	#15
firebird1999us Drives: 2003 Mach 1 Join Date: Oct 2008 Location: Georgia Posts: 293	Direct from Connecticut!

08-15-2014, 01:35 AM	#16
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,961	Oooo... nice. It should be extra deep with that longer pipe looping around from the back of the muffler. Greg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
stock scion xa exhaust and intake manifold and others	taman86	Items for Sale by private party	0	09-27-2012 02:39 PM
Aftermarket Exhaust; More Power?	myt	Performance Modifications	23	07-29-2007 03:18 PM
A good aftermarket exhaust...	whooppee777	Performance Modifications	4	04-06-2007 02:12 PM
What aftermarket exhaust will fit the Yaris Sedan?	dngz	Performance Modifications	2	10-02-2006 01:41 PM
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q.	fantabulousbaby	Cosmetic Modifications (Exterior/Interior)	22	08-29-2006 01:13 PM