Chino's Turbo Thread - Page 11 - Toyota Yaris Forums

at3GG · 04-15-2009, 06:58 PM

Quote:

Originally Posted by ChinoCharles

Let off the clutch fast enough to gain good traction off the line without spinning the tires. Tire spin is BAD.

thats what i was thinking just never actually heard a name for it

at3GG · 04-15-2009, 06:59 PM

Quote:

Originally Posted by ChinoCharles

What... intake, full exhaust, pulleys, short shifter... what else is there?

flux capacitor

cali yaris · 04-15-2009, 07:39 PM

Micro Image stickers?

LtNoogie · 04-15-2009, 07:43 PM

Charles, how is your idling and low rpm engine response?

Nexus1155 · 04-15-2009, 08:02 PM

Quote:

flux capacitor

1.21 JIGGAWATTS!!!!!!

at3GG · 04-15-2009, 08:10 PM

Quote:

Originally Posted by Nexus1155

1.21 JIGGAWATTS!!!!!!

ChinoCharles · 04-15-2009, 08:53 PM

Long, idling is as good as stock. Idles a little high when it is cold (1100-ish RPM) but once it warms up it goes back to the 750 RPM or so it was before the kit.

Under about 2 grand the engine feels exactly the same as it did before. From 2,000 to 3,200 RPM you can feel a little kick and hear the turbo spool a bit. From 3,200 on its a frickin' rocket. The turbo sounds like 20 vacuum cleaners under my feet.

Garm, I would be honored to send you the Chinotake.

PETERPOOP · 04-15-2009, 08:57 PM

I believe 750 is above stock idle at a warm idle.

ChinoCharles · 04-15-2009, 09:00 PM

Only a hair if at all. Stock was what, 700?

PETERPOOP · 04-15-2009, 09:01 PM

idk, I remember reading somewhere it's 550-650 or something like that (no a/c). Don't quote me on that.

ChinoCharles · 04-15-2009, 09:02 PM

I'm going by what I saw on my tach. Can someone else confirm or deny?

LtNoogie · 04-15-2009, 09:05 PM

It's different for the MT and AT. It's listed in the service manual.

ChinoCharles · 04-15-2009, 09:09 PM

Good deal, I'll have to check later. I'm curious now.

LtNoogie · 04-15-2009, 09:10 PM

This is all I found so far for the automatic.

Engine idle speed, (A/C OFF) N position, 650 to 750 rpm

AlexNet0 · 04-15-2009, 09:23 PM

warmed up (mind you this is no boost at all) my mostly stock 07 MT LB idles between 500 and 650

ChinoCharles · 04-15-2009, 09:24 PM

OK, so I'm a little high. Makes sense when you consider the larger injectors and colder plugs, no?

By the way, second tank was 34.1 MPG on Shell 93.

LtNoogie · 04-15-2009, 09:30 PM

From the Engine Mechanical section of the 2007 repair manual

(5) Inspect the engine idling speed.
Idling speed:
550 to 650 rpm for manual transaxle
650 to 750 rpm for automatic transaxle

NOTICE:
• Turn all the electrical systems and the A/C off.
• Inspect the idling speed with the cooling fan off.
• When checking the idling speed, shift the transmission to either the neutral
position or the parking position.

ChinoCharles · 04-15-2009, 09:34 PM

OK, I'll get an exact reading on idle on my way home from the game.

04-15-2009, 07:39 PM	#183
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Micro Image stickers? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

04-15-2009, 07:43 PM	#184
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	Charles, how is your idling and low rpm engine response? __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

04-15-2009, 09:05 PM	#192
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	It's different for the MT and AT. It's listed in the service manual. __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

04-15-2009, 09:10 PM	#194
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	This is all I found so far for the automatic. Engine idle speed, (A/C OFF) N position, 650 to 750 rpm __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

04-15-2009, 09:23 PM	#195
AlexNet0 View User's Garage Drives: '07 Yaris 3dr Join Date: Nov 2008 Location: Rockland, ME Posts: 1,638	warmed up (mind you this is no boost at all) my mostly stock 07 MT LB idles between 500 and 650 __________________ ---------- MI-YW ----------

04-15-2009, 08:53 PM	#187
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Long, idling is as good as stock. Idles a little high when it is cold (1100-ish RPM) but once it warms up it goes back to the 750 RPM or so it was before the kit. Under about 2 grand the engine feels exactly the same as it did before. From 2,000 to 3,200 RPM you can feel a little kick and hear the turbo spool a bit. From 3,200 on its a frickin' rocket. The turbo sounds like 20 vacuum cleaners under my feet. Garm, I would be honored to send you the Chinotake.

04-15-2009, 08:57 PM	#188
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	I believe 750 is above stock idle at a warm idle.

04-15-2009, 09:00 PM	#189
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Only a hair if at all. Stock was what, 700?

04-15-2009, 09:01 PM	#190
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	idk, I remember reading somewhere it's 550-650 or something like that (no a/c). Don't quote me on that.

04-15-2009, 09:02 PM	#191
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	I'm going by what I saw on my tach. Can someone else confirm or deny?

04-15-2009, 09:09 PM	#193
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Good deal, I'll have to check later. I'm curious now.

04-15-2009, 09:24 PM	#196
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	OK, so I'm a little high. Makes sense when you consider the larger injectors and colder plugs, no? By the way, second tank was 34.1 MPG on Shell 93.

04-15-2009, 09:30 PM	#197
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	From the Engine Mechanical section of the 2007 repair manual (5) Inspect the engine idling speed. Idling speed: 550 to 650 rpm for manual transaxle 650 to 750 rpm for automatic transaxle NOTICE: • Turn all the electrical systems and the A/C off. • Inspect the idling speed with the cooling fan off. • When checking the idling speed, shift the transmission to either the neutral position or the parking position. __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

04-15-2009, 09:34 PM	#198
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	OK, I'll get an exact reading on idle on my way home from the game.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whats needed to turbo charge the yaris?	Arkhangel	Forced Induction Forum	44	03-02-2009 10:08 PM
Turbo Kit - trade for stock parts!	crankyelbow	Items for Sale by private party	62	02-03-2009 12:30 PM
delayed turbo project...	joey1320	Forced Induction Forum	8	09-26-2007 11:18 PM
NCP 91 RS 1500 TRD Turbo ?????	ramishrrr	General Yaris / Vitz Discussion	3	01-15-2007 04:51 PM
Vitz Rs turbo vs U.S. Yaris add turbo?	weaponrcamry	Performance Modifications	18	08-09-2006 08:45 PM