|
04-29-2015, 02:51 AM | #37 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
Nice, hope it all works out with both your guy's car. When i had a replica, it didnt fit even with jdm bar on stock brackets, cuz i know i tried every combo possible. Plus the fact the thing never fit anyhow, i smashed it up and tossed it. Fiberglass should be more workable, this was in ABS plastic.
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
05-03-2015, 05:01 PM | #38 |
Drives: 2007 Yaris HB 5spd Join Date: Jan 2015
Location: Glendive, MT
Posts: 166
|
The shorter brackets were the answer. Removed stock longer ones and put on shorter ones with stock crash bar and fits perfect. The vis is a nice bumper. Only one gripe. Doesnt come with the abs rs upper and lower grills. Came with metal weave in both locations. Found lower grill on jp-carparts.com but having a hard time locating upper abs grill piece. The kaminari reverse cowl hood fits perfectly as well. Will post pics when car is done at body shop for paint and the fixing of all dings and dents.
thanks to kcalb siray and ezhacker1 for pointing me in the right direction. And thanks to everyone on this thread for the help. Cant wait to see it all put together and painted. I think it will look sick! Last edited by Innovative 1; 05-03-2015 at 05:05 PM. Reason: thanks to fellow members |
05-03-2015, 06:17 PM | #39 | |
Drives: 07 Yaris 3 door Join Date: Feb 2013
Location: conyers ga
Posts: 87
|
Quote:
http://www.ebay.com/itm/FRONT-GRILL-...92e4a2&vxp=mtr Here is one on japanparts. https://www.japanparts.com/parts/detail/25798 Question. Do you know yet if the factory grills will fit the VIS bumper? |
|
05-03-2015, 06:24 PM | #40 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,740
|
brackets
vis kaminari I want completed pics no later than 3pm Tuesday. Make it happen.
__________________
|
05-03-2015, 07:45 PM | #41 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
Yes!!! Happy to be of help, That's good to know, even the replica ones will work like actual RS. Brackets Only!
I dont think real grilles will work, probably zip tie them.
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
05-05-2015, 07:18 AM | #42 |
Newbie
Drives: audi a3 Join Date: May 2015
Location: london
Posts: 1
|
I did samething to my car last year. ill post a picture of it
car servicing |
05-06-2015, 08:03 AM | #43 |
Drives: 2007 Yaris HB 5spd Join Date: Jan 2015
Location: Glendive, MT
Posts: 166
|
Sorry weeyari. Wont be able to get r done by your deadline. Got to take it in for paint and body work hopwfully by the end of this week beginning of next. Emailed rdh japan on the color code for the trd lip spoiler. Thought it would come primed but its fully painted and need the color code so I can do the cowl section of hood same and the grills.
|
05-06-2015, 08:39 AM | #44 |
Drives: 2010 black yaris Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
|
What are the VIS bumpers made of? fiberglass or ABS plastic? Curious, fiberglass has been my downfall for a long time. It just chips so easily on the highway.
__________________
-Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting." |
05-06-2015, 08:41 AM | #45 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,740
|
Fiberglass.
__________________
|
05-06-2015, 11:05 AM | #46 |
Drives: 2007 Yaris HB 5spd Join Date: Jan 2015
Location: Glendive, MT
Posts: 166
|
I have the same concerns about chipping. Thinking of having the body shop teflon coat the hood and bumper when I get it painted.
|
05-06-2015, 11:47 AM | #47 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,740
|
Just don't kiss any curbs. No forgiveness there.
Sent from my iPhone using Tapatalk
__________________
|
05-06-2015, 07:18 PM | #48 |
Drives: 07 Yaris 3 door Join Date: Feb 2013
Location: conyers ga
Posts: 87
|
Good thing about fiberglass is it is fairly easy to work with and repair. I know factory plastic bumper covers would be ideal, it just so expensive to get them shipped over here.
|
05-07-2015, 03:22 AM | #49 |
Drives: 2010 black yaris Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
|
Its not so much that it is easy to repair.. It is having to repair it so often. It's not like you can just use some touch up paint to fill in the nicks in the paint. Rocks also take a chunk of fiberglass with the paint.
I will say, the C-One bumper I got from Micro Image was really thin. It was cracking where the bumper met the fender within a month. Had to reinforce that area and still started doing the same thing a few months later
__________________
-Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting." |
05-08-2015, 12:16 PM | #50 |
それを吸ってください
|
Real RS grilles worked perfectly fine on my fiberglass bumper (bought from echo_hrs). Granted I had to make tabs and glass them in for them to stay put but they were a perfect fit. Zip ties would work ONLY if there is something to zip tie them to. The fiberglass and ABS replica's I've seen don't really have tabs at all so if he doesn't, he'll have to get creative.
|
05-08-2015, 12:22 PM | #51 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,740
|
Don't know who you bought from but echo_hrs never, ever, ever had fiberglass bumpers. It was always nothing but the real thing for him.
__________________
|
05-14-2015, 12:14 PM | #52 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,740
|
*crickets*
__________________
|
05-14-2015, 01:56 PM | #53 | |
それを吸ってください
|
I think you are reading my sentence differently than I wrote it; the grilles are real, not my bumpers.
Quote:
|
|
05-20-2015, 07:14 PM | #54 |
Drives: 07 Yaris 3 door Join Date: Feb 2013
Location: conyers ga
Posts: 87
|
I am dying to see the VIS bumper installed!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Micro Image Short Shift Kit DIY | jpmck03 | DIY / Maintenance / Service | 17 | 02-24-2014 07:57 AM |
The MI SSK "Not a Big 'Car Guy'" Review | jpmck03 | Performance Modifications | 36 | 09-19-2013 11:41 PM |
License plate bracket for '09 that doesn't require putting holes in the bumper? | BennyLava | General Yaris / Vitz Discussion | 16 | 03-10-2013 03:08 AM |
WTB: Front Bumper, Bumper Arms, Brackets and RH Radiator Arm | n.a. | Willing to Buy by private party | 3 | 02-12-2012 01:14 PM |
Thailand OEM/Aftermarket Accessories and Bodykits GB Round 2! | eTiMaGo | Items for Sale by private party | 118 | 09-10-2007 02:10 PM |