DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag

[CTScott]

Originally Posted by mariann

thanks nickhjort. you really helped me.

any advice to my previuse post? can i connect the swich assembly directly to some wires on D3 connector or i'll need to run a wire through the firewall directly to the ECM an nichhjort did. the model is SOL 2007 liftback/hatchback european style(located in israel)

Does you SOL have radio controls on the steering wheel? If so, I believe that the three wires shown in your picture are for that purpose. In your picture, Pin 1 and Pin are empty, so you will need to wire to the ECM, as nickhjort did.

[mariann]

Originally Posted by CTScott

Does you SOL have radio controls on the steering wheel? If so, I believe that the three wires shown in your picture are for that purpose. In your picture, Pin 1 and Pin are empty, so you will need to wire to the ECM, as nickhjort did.

i dont have radio controll or shift controll on my steering wheel. the only thing i got is the horn and the airbag
i wonder what thoes wire for.

anyway. i hope i'll buy the swiches and resistors today and even install them (or tomorow). seems really easey. i'm preety good with wires throught the firewall, did it befor.

wish me luck