Turbo setup - Toyota Yaris Forums

1.5ty · 09-25-2010, 03:25 PM

Well I got my turbo setup on my car aem fic is hooked up but I think I may have fucked up on the turbo car runs and is ok but I can't hear the turbo spool up it is a t3/t4 with a 55 trim compressor and a 58 trim turbine am I missing any thing or do I need a smaller turbo

Focus_Sh1ft · 09-25-2010, 08:48 PM

...More info?

If you messed up the FIC wiring, the car most likely wouldn't even start.

1.5ty · 09-25-2010, 10:00 PM

When I use the jumper wire it works just fine spools and everything so there something I messed up but till I get back to pa and get the wiring redone and on the dyno I'm just going to try and stay put of boost :( but I'll keep y'all up to date if you wanna is my set go to my Facebook.com and look up my email drifter704@yahoo.com and add me as a friend and it well lost you see some pics

sleey0 · 09-25-2010, 10:37 PM

Just sent a friend request to you.

My name is Wes. Also sent you a pm!!!

severous01 · 09-25-2010, 11:30 PM

ok, i quit reading when i couldnt tell when one sentence ended and another begins. that was about 20 words into it and then i figured out i was wasting more time trying to determine where to stop reading a sentence and start a new one and then decided that it wasnt worth my time

good luck with life...hope you dont do this for your boss

1.5ty · 09-26-2010, 01:33 AM

This is my turbo setup

sleey0 · 09-26-2010, 01:41 AM

Did u build the kit yourself?

Where did you get the piping, etc?

Looks good bro!!!

1.5ty · 09-26-2010, 02:13 AM

Got it all off ebay I know people hate on ebay but hey the have never let me do but
Yeah I did all the work on my own took about a week to get everything right
It was worth every min of it

Nexus1155 · 09-26-2010, 02:56 AM

whered you get the manifold? Thats how essentially I want mine, but A. I do not want to cut the wiper cowl if thats what you did or B. it looks like a bitch to make a downpipe or get to ECU.

1.5ty · 09-26-2010, 08:03 AM

Igot it from eBay Right off hand I can't remember where when I can I'll post a link
I didn't have to cut the wiper cowl it sit about 2" down from it
The turbo I used made me have to move the ecru in the cabin along with my aem fic
For exhaust I had a shop make a custom 2 1/2" exhaust front to back so I really don't know how bad it was
And it really matters what turbo you get for how to make the down pipe mine is a v band turbo so I just bought the 90 degree v band down pipe and the shop worked from that

1.5ty · 09-26-2010, 08:05 AM

03-06 SCION XB XA 1.5L CAST T25 TURBO EXHAUST MANIFOLD
That is the link for the manifold like my setup

sleey0 · 09-26-2010, 10:36 AM

Could have bought the manifold from Garm:) lol

Is ur turbo a 3 or 4 bolt?

AND can u still use AC?

1.5ty · 09-26-2010, 01:11 PM

It is a 4 bolt mani exhaust is a v band clamp with a t3/t4 turbo like mine no a t25 maybe idk

pimp my yaris · 09-26-2010, 02:26 PM

Do you still have A/C lines? I thought about getting that manafold and turbo set up, but I was worried about A/C line clearance. I decided to go with a bottom mount. Get some heat wrap for that hairdryer and it will keep things much cooler under the hood. O ya, and big props too

1.5ty · 09-26-2010, 09:20 PM

With the turbo I used I had to lose the ac

09-25-2010, 03:25 PM	#1
1.5ty Rollerskate View User's Garage Drives: 09 hb Join Date: Apr 2010 Location: Salisbury nc Posts: 59	Turbo setup Well I got my turbo setup on my car aem fic is hooked up but I think I may have fucked up on the turbo car runs and is ok but I can't hear the turbo spool up it is a t3/t4 with a 55 trim compressor and a 58 trim turbine am I missing any thing or do I need a smaller turbo

09-25-2010, 10:37 PM	#4
sleey0 Drives: 2008 Yaris LB Join Date: Jul 2010 Location: PA Posts: 899	Just sent a friend request to you. My name is Wes. Also sent you a pm!!! __________________ "And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010

09-26-2010, 01:41 AM	#7
sleey0 Drives: 2008 Yaris LB Join Date: Jul 2010 Location: PA Posts: 899	Did u build the kit yourself? Where did you get the piping, etc? Looks good bro!!! __________________ "And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010

09-26-2010, 10:36 AM	#12
sleey0 Drives: 2008 Yaris LB Join Date: Jul 2010 Location: PA Posts: 899	Could have bought the manifold from Garm:) lol Is ur turbo a 3 or 4 bolt? AND can u still use AC? __________________ "And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 08:14 PM
anyone wanna sale there turbo setup for $1000	1.5ty	Willing to Buy by private party	0	06-02-2010 02:51 AM
what are the basic components 4 turbo setup	jouna	Forced Induction Forum	1	02-14-2010 03:26 PM
HKS turbo timer type 1	Tamago	Performance Modifications	3	07-21-2009 11:59 AM
Twin turbo dual exaust yaris 1NZ-FE setup?	CtrlAltDefeat	Forced Induction Forum	92	05-21-2009 12:14 PM

09-25-2010, 08:48 PM	#2
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	...More info? If you messed up the FIC wiring, the car most likely wouldn't even start.

09-25-2010, 10:00 PM	#3
1.5ty Rollerskate View User's Garage Drives: 09 hb Join Date: Apr 2010 Location: Salisbury nc Posts: 59	When I use the jumper wire it works just fine spools and everything so there something I messed up but till I get back to pa and get the wiring redone and on the dyno I'm just going to try and stay put of boost :( but I'll keep y'all up to date if you wanna is my set go to my Facebook.com and look up my email drifter704@yahoo.com and add me as a friend and it well lost you see some pics

09-25-2010, 11:30 PM	#5
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	ok, i quit reading when i couldnt tell when one sentence ended and another begins. that was about 20 words into it and then i figured out i was wasting more time trying to determine where to stop reading a sentence and start a new one and then decided that it wasnt worth my time good luck with life...hope you dont do this for your boss

09-26-2010, 02:13 AM	#8
1.5ty Rollerskate View User's Garage Drives: 09 hb Join Date: Apr 2010 Location: Salisbury nc Posts: 59	Got it all off ebay I know people hate on ebay but hey the have never let me do but Yeah I did all the work on my own took about a week to get everything right It was worth every min of it

09-26-2010, 02:56 AM	#9
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	whered you get the manifold? Thats how essentially I want mine, but A. I do not want to cut the wiper cowl if thats what you did or B. it looks like a bitch to make a downpipe or get to ECU.

09-26-2010, 08:03 AM	#10
1.5ty Rollerskate View User's Garage Drives: 09 hb Join Date: Apr 2010 Location: Salisbury nc Posts: 59	Igot it from eBay Right off hand I can't remember where when I can I'll post a link I didn't have to cut the wiper cowl it sit about 2" down from it The turbo I used made me have to move the ecru in the cabin along with my aem fic For exhaust I had a shop make a custom 2 1/2" exhaust front to back so I really don't know how bad it was And it really matters what turbo you get for how to make the down pipe mine is a v band turbo so I just bought the 90 degree v band down pipe and the shop worked from that

09-26-2010, 08:05 AM	#11
1.5ty Rollerskate View User's Garage Drives: 09 hb Join Date: Apr 2010 Location: Salisbury nc Posts: 59	03-06 SCION XB XA 1.5L CAST T25 TURBO EXHAUST MANIFOLD That is the link for the manifold like my setup

09-26-2010, 01:11 PM	#13
1.5ty Rollerskate View User's Garage Drives: 09 hb Join Date: Apr 2010 Location: Salisbury nc Posts: 59	It is a 4 bolt mani exhaust is a v band clamp with a t3/t4 turbo like mine no a t25 maybe idk

09-26-2010, 02:26 PM	#14
pimp my yaris C'est la vie Drives: 2009 2 door hatchback Join Date: Aug 2009 Location: chicago Posts: 482	Do you still have A/C lines? I thought about getting that manafold and turbo set up, but I was worried about A/C line clearance. I decided to go with a bottom mount. Get some heat wrap for that hairdryer and it will keep things much cooler under the hood. O ya, and big props too

09-26-2010, 09:20 PM	#15
1.5ty Rollerskate View User's Garage Drives: 09 hb Join Date: Apr 2010 Location: Salisbury nc Posts: 59	With the turbo I used I had to lose the ac