Group Buy - True Double Din Radio Trim for Liftbacks (180mm opening) - Page 11 - Toyota Yaris Forums

CTScott · 05-17-2009, 03:51 PM

I still haven't gotten a reply from PMs to: ozmdd, yrsdrgn, hwnstyle21, or Syroyizhka.

Please let me know ASAP if you are still interested. I would like the get the last of these shipped this week. If I don't hear from you by mid-week, I'm going to go ahead and move them to the next people on the waiting list.

IsLNdbOi · 05-17-2009, 03:58 PM

How many people do you have on the waiting list? Are there enough on the list for the next group buy?

CTScott · 05-17-2009, 07:33 PM

Quote:

Originally Posted by IsLNdbOi

How many people do you have on the waiting list? Are there enough on the list for the next group buy?

Thus far, six on the waiting list, and 5 sales still pending.

lammy29 · 05-17-2009, 08:40 PM

Quote:

Originally Posted by CTScott

To use it with your Yaris, you would also have to replace the outer vertical trim pieces that have the cut-outs for the radio controls. You would need:

PZ489-B0330-00 (The silver trim piece)
55436-52010-B0 and 55435-52010-B0 (The left and right vertical trim pieces)

You may be able to get the parts directly from your Toyota dealer, since they originate from Europe. If not, it would probably be much more cost effective for you to go directly through "Danish Yaris", as shipping from Denmark to the UK would be more reasonable.

thanks also would this item form ebay fit the item ya selling?

http://cgi.ebay.co.uk/ws/eBayISAPI.d...%3DI%26otn%3D2

i have a alpine cda-9855

CTScott · 05-17-2009, 09:06 PM

Quote:

Originally Posted by lammy29

thanks also would this item form ebay fit the item ya selling?

http://cgi.ebay.co.uk/ws/eBayISAPI.d...%3DI%26otn%3D2

No. That is made to reduce the opening for the OEM one that comes on our cars here. It lets you mount a single DIN radio in the OEM opening. With the trim we have purchased to mount a single DIN radio you would just have to use the pocket to fill the space below the radio.

lammy29 · 05-17-2009, 09:42 PM

Quote:

Originally Posted by CTScott

No. That is made to reduce the opening for the OEM one that comes on our cars here. It lets you mount a single DIN radio in the OEM opening. With the trim we have purchased to mount a single DIN radio you would just have to use the pocket to fill the space below the radio.

so if i purchased the thing you are selling it would end up looking like the pic below??

CTScott · 05-17-2009, 10:26 PM

Quote:

Originally Posted by lammy29

so if i purchased the thing you are selling it would end up looking like the pic below??

No. It would not have the black filler on the sides - The silver would meet the sides of the radio face.

lammy29 · 05-18-2009, 04:26 AM

Quote:

Originally Posted by CTScott

No. It would not have the black filler on the sides - The silver would meet the sides of the radio face.

does that mean i can just put my system straight in, or wont fit.

lol sorry being akward and asking like a milli questions. what about the the bottom bit will there jus be a gap?

CTScott · 05-18-2009, 08:30 AM

Quote:

Originally Posted by lammy29

does that mean i can just put my system straight in, or wont fit.

lol sorry being akward and asking like a milli questions. what about the the bottom bit will there jus be a gap?

No problem. Your radio should fit, but would have an opening below it, since it is half of the height of the opening. You would then fill the opening with a single DIN filler, like the pocket shown below:

ImportRacer88 · 05-18-2009, 09:58 AM

do they have any for the sedans

CTScott · 05-18-2009, 11:45 AM

Quote:

Originally Posted by ImportRacer88

do they have any for the sedans

No - Not that I've been able to find.

ozmdd · 05-18-2009, 01:28 PM

pm sent

lammy29 · 05-18-2009, 02:07 PM

Quote:

Originally Posted by CTScott

No problem. Your radio should fit, but would have an opening below it, since it is half of the height of the opening. You would then fill the opening with a single DIN filler, like the pocket shown below:

do you know where i can get that from?

Danish Yaris · 05-18-2009, 02:15 PM

Hi

I´m not sure, but maybe you can use the original Toyota one.

Regards Steven.

CTScott · 05-18-2009, 04:53 PM

Quote:

Originally Posted by lammy29

do you know where i can get that from?

You can typically pick up a single DIN filler pocket from places that sell/install car stereos.

The one that I showed above is from ebay:

http://cgi.ebay.com/Universal-Pocket...3286.m20.l1116

lammy29 · 05-18-2009, 07:11 PM

Quote:

Originally Posted by CTScott

You can typically pick up a single DIN filler pocket from places that sell/install car stereos.

The one that I showed above is from ebay:

http://cgi.ebay.com/Universal-Pocket...3286.m20.l1116

sweet your awesome!!

so i need:
PZ489-B0330-00
55436-52010-B0
55435-52010-B0
and the ebay item and i will able to fit my alpine system in?????

CTScott · 05-18-2009, 07:20 PM

Quote:

Originally Posted by lammy29

sweet your awesome!!

so i need:
PZ489-B0330-00
55436-52010-B0
55435-52010-B0
and the ebay item and i will able to fit my alpine system in?????

Correct. You may have to be a bit creative to mount the alpine HU and the pocket to the stock brackets (a little drilling and/or grinding of the brackets may be required).

lammy29 · 05-18-2009, 07:33 PM

Quote:

Originally Posted by CTScott

Correct. You may have to be a bit creative to mount the alpine HU and the pocket to the stock brackets (a little drilling and/or grinding of the brackets may be required).

i waited 2yrs nearly..........

so i dont need to purchase the item your selling?

05-18-2009, 09:58 AM	#190
ImportRacer88 View User's Garage Drives: 4dr Sedan s Join Date: Nov 2008 Location: Meshoppen, Pa 18630 Posts: 86	do they have any for the sedans __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dash destroyed in electrical fire.	purpleminx	General Yaris / Vitz Discussion	79	06-12-2009 03:53 PM
Double Din 180mm Trim Bezel	esyres	In Car Entertainment + Electronics (audio / video / alarm)	19	03-19-2009 09:01 PM
[Recovered] Group Buy for Australia #1 (Badges)	harveyjai	Australia	9	12-13-2008 03:59 PM

05-17-2009, 03:51 PM	#181
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	I still haven't gotten a reply from PMs to: ozmdd, yrsdrgn, hwnstyle21, or Syroyizhka. Please let me know ASAP if you are still interested. I would like the get the last of these shipped this week. If I don't hear from you by mid-week, I'm going to go ahead and move them to the next people on the waiting list.

05-17-2009, 03:58 PM	#182
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	How many people do you have on the waiting list? Are there enough on the list for the next group buy?

05-18-2009, 01:28 PM	#192
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	pm sent

05-18-2009, 02:15 PM	#194
Danish Yaris Drives: Toyota Yaris 1,8 TS 5dr. 2007 Join Date: Dec 2008 Location: Copenhagen, Denmark Posts: 166	Hi I´m not sure, but maybe you can use the original Toyota one. Regards Steven.