DIY Ebay Projector Fog Lights? - Toyota Yaris Forums

advocate · 10-30-2010, 01:20 AM

Been searching all over for an install guide for these.

Here's the kit:
http://cgi.ebay.com/ebaymotors/YARIS...item2a0b630629

Anyone know how to install these? Seen a guide on it?

advocate · 10-30-2010, 02:14 AM

sounds like I need to cut up the wiring harness on the engine bay side. there's a lot of wiring going on there. there's definitely a relay as well.

other fogs just had simple wires running to em

big lo · 10-30-2010, 05:57 AM

I think fngravy has the same set up, if you have fogs installed it would be easy and the kit come with all wiring cool set up nice find

fnkngrv · 10-30-2010, 10:50 AM

I didn't have to cut anything. I did splice into my parking lights for the fogs however the rest plugs into the factory stalk. I spliced the switch into my 12v that is in my armrest. Not sure where yours would be on the LB tho.

advocate · 10-30-2010, 01:23 PM

I'm not sure what you mean by 'factory stalk'.

There's two sets of wires on each fop lamp. I don't see any wiring near the fog light area of the bumper that I can possible splice into. Two of the four wires per lamp are extremely short.

Picture:

So I don't see where those two super short wires are going to tap into since I don't see any wiring that close to the fop lamp position. Also, I don't seem to be getting power to the main fog lamps with my old wire from the fuse box in the engine bay. I think the relay is interfering?

I have everything set up from a previous install of fog lights I just need to transplant this pair in.

10-30-2010, 01:20 AM	#1
advocate Drives: car Join Date: Oct 2008 Location: location Posts: 1,033	DIY Ebay Projector Fog Lights? Been searching all over for an install guide for these. Here's the kit: http://cgi.ebay.com/ebaymotors/YARIS...item2a0b630629 Anyone know how to install these? Seen a guide on it?

10-30-2010, 10:50 AM	#4
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	I didn't have to cut anything. I did splice into my parking lights for the fogs however the rest plugs into the factory stalk. I spliced the switch into my 12v that is in my armrest. Not sure where yours would be on the LB tho. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ebay halo fog lights	xslowxpokex	DIY / Maintenance / Service	4	05-14-2010 09:28 PM
DIY LED Tail (Rear) Head Lights	dg4rez	DIY / Maintenance / Service	11	12-21-2009 04:10 AM
DIY needed for sedan ebay fog lights.	YarisSedan	DIY / Maintenance / Service	0	11-16-2009 05:19 PM
My ebay fog lights and led interior light pics	Julz	Photo-Video-Media Gallery	6	09-13-2007 10:41 AM
Ebay vs. jimcat fog lights	RocknRollRon	DIY / Maintenance / Service	17	09-11-2007 10:31 AM

10-30-2010, 02:14 AM	#2
advocate Drives: car Join Date: Oct 2008 Location: location Posts: 1,033	sounds like I need to cut up the wiring harness on the engine bay side. there's a lot of wiring going on there. there's definitely a relay as well. other fogs just had simple wires running to em

10-30-2010, 05:57 AM	#3
big lo View User's Garage Drives: 2007 VIOS Join Date: May 2010 Location: Loiza,Puerto Rico Posts: 1,121	I think fngravy has the same set up, if you have fogs installed it would be easy and the kit come with all wiring cool set up nice find

10-30-2010, 01:23 PM	#5
advocate Drives: car Join Date: Oct 2008 Location: location Posts: 1,033	I'm not sure what you mean by 'factory stalk'. There's two sets of wires on each fop lamp. I don't see any wiring near the fog light area of the bumper that I can possible splice into. Two of the four wires per lamp are extremely short. Picture: So I don't see where those two super short wires are going to tap into since I don't see any wiring that close to the fop lamp position. Also, I don't seem to be getting power to the main fog lamps with my old wire from the fuse box in the engine bay. I think the relay is interfering? I have everything set up from a previous install of fog lights I just need to transplant this pair in.