Audio installation based on DerickVeliz and SQcomp! - Page 3 - Toyota Yaris Forums

derickveliz2 · 04-22-2012, 12:43 PM

Baffle is the MDF ring you use to hold the speakers.

OK, this is my best shot, this would be my best advice from my experience and it's written in my thread some where.

If you go with the 80PRS, the Tweeters on a-pillars, woofer in the trunk and (pay attention here) get the L6 (Midbass) and put them on the doors I assure you will sound much better than the Mids on the a-pillars, I've gone through a big process of comparing and if I where you I would go that way.

PLDs would be in your favor, you will be full active, enjoy the extra width of the stage provided by the L6s down in the doors, since the L6 can play up to 5khz really nice and your tweeters can go down to 5 easily. I do this exercise many times to show how good the L6s are and turn of my Mids, believe me it's true.

D.

packetrace · 04-22-2012, 12:54 PM

So you would suggest me to wait for the L3 and buy the L6 right now...and be 2-way + sub FULL ACTIVE ?

derickveliz2 · 04-22-2012, 12:54 PM

Quote:

Originally Posted by packetrace

Any suggestion for a subwoofer ? at about 500W RMS....? I had tought of the IDQ12V3D4...but it is backorder on sonicelectronix...

How much to do you want to spend on the woofer, bend my arm and I may sell my IDQ

D.

packetrace · 04-22-2012, 01:01 PM

Shipping will be expensive to Canada since it is probably very heavy...

is it the IDQ12V3D4 ?

I had expected 249.99 + shipping as it is on sonicelectronix...

PM me with your price...I am interested....

derickveliz2 · 04-22-2012, 01:03 PM

Quote:

Originally Posted by packetrace

So you would suggest me to wait for the L3 and buy the L6 right now...and be 2-way + sub FULL ACTIVE ?

Yes and no,

My point is that going this way it will have a better stage than 3 way with Mids in a-pillars,

In seconds I can turn off my mids and have a 2 way, it's not as spectacular as the 3 way for obvious reasons (PLDs) but sounds better than my old 3 way with Mids in a-pillars.

my 2cts

D.

packetrace · 04-22-2012, 01:07 PM

Do you have pics of your mids and kick area as it is right now ?

derickveliz2 · 04-22-2012, 01:17 PM

Post # 1794

D.

packetrace · 04-22-2012, 01:22 PM

Are you going to fiberglass a kickpanel for the mids ?

And 2 questions..you relocated all the wires ? and you no more uses the parts that was covering this area ?

derickveliz2 · 04-22-2012, 01:32 PM

Quote:

Originally Posted by packetrace

Are you going to fiberglass a kickpanel for the mids ?

And 2 questions..you relocated all the wires ? and you no more uses the parts that was covering this area ?

No I did not, and I'm not.

Yes, I extended the ground and move them a little up under the dash on both sides.
I may modify the covering in the future with a big opening but right now I have to finish other stuff.

D.

packetrace · 04-22-2012, 02:59 PM

I just took a look at this part of your thread....WOW!! very nice what sqcomp have done with his doors and kickpanel!

That gives me a lot of idea....I'll do like you told me...start with tweeter in a-pillar and L6 in doors!...when I'll be good at fiberglassing I'll kickpanel mids!

You guys are awesomeee

packetrace · 04-22-2012, 04:04 PM

I am very tempted to go for the DEH-80PRS....I found it at 281.95 + 26 $ shipping...!!!!

derickveliz2 · 04-22-2012, 04:05 PM

Quote:

Originally Posted by packetrace

I am very tempted to go for the DEH-80PRS....I found it at 281.95 + 26 $ shipping...!!!!

where?

D.

packetrace · 04-22-2012, 04:07 PM

HERE

CLick on add to cart and it is 281.95!

packetrace · 04-22-2012, 04:16 PM

What material is the gray piece made of ?

I am so curious..asking lot of question...sorry

derickveliz2 · 04-22-2012, 04:20 PM

Quote:

Originally Posted by packetrace

What material is the gray piece made of ?

I am so curious..asking lot of question...sorry

No problem! (O:

That is a Mock-up I made (from foam board) before cutting the MDF baffles.

D.

packetrace · 04-22-2012, 04:29 PM

Quote:

Originally Posted by derickveliz2

No problem! (O:

That is a Mock-up I made (from foam board) before cutting the MDF baffles.

D.

So your final install is MDF baffle that you have screwed to the body ?

And do you think I should jump on the DEH-80PRS ?

derickveliz2 · 04-22-2012, 04:36 PM

Quote:

Originally Posted by packetrace

So your final install is MDF baffle that you have screwed to the body ?

And do you think I should jump on the DEH-80PRS ?

screwed and sealed to create an IB, I cut the metal inside the a-frame to fit the Mid.

on a budget I think a 2 way active the Yaris sounds great!

D.

packetrace · 04-22-2012, 04:46 PM

So if I resume...

L1V1 in A-Pillar as tweeter 5Khz and up
L6 in door as mid-range-midbass..100Hz up to 5kHz
Sub in trunk or some where else...100Hz and less

Powerbass 1100.5X 5channel amp for the whole setup..

Fiberglassing the trunk for sub...fiberglassing A-pillar for tweeter...fiberglassing doors for Mids!

Pionner DEH-80PRS in the deck

04-22-2012, 12:43 PM	#37
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Baffle is the MDF ring you use to hold the speakers. OK, this is my best shot, this would be my best advice from my experience and it's written in my thread some where. If you go with the 80PRS, the Tweeters on a-pillars, woofer in the trunk and (pay attention here) get the L6 (Midbass) and put them on the doors I assure you will sound much better than the Mids on the a-pillars, I've gone through a big process of comparing and if I where you I would go that way. PLDs would be in your favor, you will be full active, enjoy the extra width of the stage provided by the L6s down in the doors, since the L6 can play up to 5khz really nice and your tweeters can go down to 5 easily. I do this exercise many times to show how good the L6s are and turn of my Mids, believe me it's true. D. __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

04-22-2012, 12:54 PM	#38
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	So you would suggest me to wait for the L3 and buy the L6 right now...and be 2-way + sub FULL ACTIVE ? __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 01:01 PM	#40
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	Shipping will be expensive to Canada since it is probably very heavy... is it the IDQ12V3D4 ? I had expected 249.99 + shipping as it is on sonicelectronix... PM me with your price...I am interested.... __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 01:07 PM	#42
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	Do you have pics of your mids and kick area as it is right now ? __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 01:17 PM	#43
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Post # 1794 D. __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

04-22-2012, 01:22 PM	#44
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	Are you going to fiberglass a kickpanel for the mids ? And 2 questions..you relocated all the wires ? and you no more uses the parts that was covering this area ? __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 02:59 PM	#46
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	I just took a look at this part of your thread....WOW!! very nice what sqcomp have done with his doors and kickpanel! That gives me a lot of idea....I'll do like you told me...start with tweeter in a-pillar and L6 in doors!...when I'll be good at fiberglassing I'll kickpanel mids! You guys are awesomeee __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 04:04 PM	#47
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	I am very tempted to go for the DEH-80PRS....I found it at 281.95 + 26 $ shipping...!!!! __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 04:07 PM	#49
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	HERE CLick on add to cart and it is 281.95! __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 04:16 PM	#50
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	What material is the gray piece made of ? I am so curious..asking lot of question...sorry __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp

04-22-2012, 04:46 PM	#54
packetrace Drives: Yaris Sedan 2009 Join Date: Sep 2010 Location: Quebec Posts: 566	So if I resume... L1V1 in A-Pillar as tweeter 5Khz and up L6 in door as mid-range-midbass..100Hz up to 5kHz Sub in trunk or some where else...100Hz and less Powerbass 1100.5X 5channel amp for the whole setup.. Fiberglassing the trunk for sub...fiberglassing A-pillar for tweeter...fiberglassing doors for Mids! Pionner DEH-80PRS in the deck __________________ Interior:ALL red, black roof Exterior:RTX scorpion painted GOLD, side and rear visor, oem spoiler, MI mesh grill, Hella supertone horn, RS badge, Vios badge, CF pillar, Led mirror cover, fog light HID 3000k, Projector retrofit HID 8000K Performance :MI CrankPulley, Tein springs, UR and TRD bar, TURBO IN PROGRESS Audio : Pionner DEH-80PRS, HAT L1V2, PowerBass 1100.5X 5 channel amp