OBDII - Toyota Yaris Forums

esse10 · 02-26-2013, 01:28 PM

Hello folks , I am new here and was wondering if there is a way to read the coolant temperature and RPM using an Iphone??? what program to use and if the yaris works with the ELM32 OBD 2 TESTER. Any help is appreciated.
thanks

julian

CTScott · 02-26-2013, 01:35 PM

The Yaris is OBDII compliant over CAN BUS and coolant temp and RPM are standard OBDII PIDs, so any hardware/software combo that supports OBDII via CAN Bus will work. With the iphone you are somewhat limited because the iphone doesn't support the bluetooth serial port mode, required by most of the bluetooth OBDII interfaces. So, for the iphone you typically need a more expensive WiFi based OBDII device.

BEEF · 02-26-2013, 01:36 PM

just type that into amazon. I did and it came up with quite a few things for what you are asking.

you could also just get an ultragauge and it is right there.

***for reference***

http://www.amazon.com/IOBD2-Wireless...e+obd2+scanner

http://ultra-gauge.com/ultragauge/index.htm

esse10 · 02-27-2013, 07:29 AM

Hey thanks folks I got my answer yesterday. The elm32 obd2 tester does work with apple's program REV2, and an iphone of course. A little pricey but worth it i think. Also tested the program FUZZYCAR and it worked also just not as many bells & whistles as the REV program. Fuzzycar is only $5 bucks at the apple's app store.

good luck folks.......

02-26-2013, 01:28 PM	#1
esse10 Drives: 2009 yaris 2 door Join Date: Feb 2013 Location: richmond TX. Posts: 232	OBDII Hello folks , I am new here and was wondering if there is a way to read the coolant temperature and RPM using an Iphone??? what program to use and if the yaris works with the ELM32 OBD 2 TESTER. Any help is appreciated. thanks julian

02-26-2013, 01:35 PM	#2
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	The Yaris is OBDII compliant over CAN BUS and coolant temp and RPM are standard OBDII PIDs, so any hardware/software combo that supports OBDII via CAN Bus will work. With the iphone you are somewhat limited because the iphone doesn't support the bluetooth serial port mode, required by most of the bluetooth OBDII interfaces. So, for the iphone you typically need a more expensive WiFi based OBDII device. __________________

02-26-2013, 01:36 PM	#3
BEEF View User's Garage Drives: 2008 yaris 3d Join Date: Apr 2011 Location: north carolina Posts: 732	just type that into amazon. I did and it came up with quite a few things for what you are asking. you could also just get an ultragauge and it is right there. *for reference* http://www.amazon.com/IOBD2-Wireless...e+obd2+scanner http://ultra-gauge.com/ultragauge/index.htm __________________ Be the change you wish to see in the world -Mahatma Gandhi-

02-27-2013, 07:29 AM	#4
esse10 Drives: 2009 yaris 2 door Join Date: Feb 2013 Location: richmond TX. Posts: 232	update Hey thanks folks I got my answer yesterday. The elm32 obd2 tester does work with apple's program REV2, and an iphone of course. A little pricey but worth it i think. Also tested the program FUZZYCAR and it worked also just not as many bells & whistles as the REV program. Fuzzycar is only $5 bucks at the apple's app store. good luck folks.......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Location of the OBDII port	sickaroll	DIY / Maintenance / Service	7	04-10-2017 09:35 PM
OBDII dongle to connect to rev app for iphone	zachryboles	Performance Modifications	1	12-01-2010 03:05 PM
Help - OBDII error code "system running lean"	Gazdaman	DIY / Maintenance / Service	4	05-14-2009 11:34 AM
What sensors can be read using OBDII on 2007 Yaris?	thebasemetn1	DIY / Maintenance / Service	7	01-11-2009 04:44 AM
Bluetooth OBDII	WolfWings	In Car Entertainment + Electronics (audio / video / alarm)	5	09-01-2007 04:44 PM