yaris speakers - Toyota Yaris Forums

yaris9876 · 07-29-2019, 01:40 PM

I took out the factory riveted speakers from my 2007 hatch. I ordered some Kenwood replacement 5.25 inch. That is the right size,yes? I dont mind doing mods to install them.

WeeYari · 07-29-2019, 02:13 PM

Umm... No!

Put a tape measure to the ones you pulled out. You'll see they are 6.5"

5.25" fit in the rear.

yaris9876 · 07-29-2019, 09:26 PM

you can measure different ways. the hole in the Yarisdoor is 6 inches. After doing much research it seems that you can put any speaker in if you figure out how to mount it. The Kenwood 1366s needs a 4.75 hole but the mounting flange extends out past that. THe oem speakers are pathetic. so light and cheaply made.
Mine were coated in dust.I am looking for something that 2 way that sounds good under 35$.

06YarisRS · 07-29-2019, 10:15 PM

I highly recommend picking up a set of tweeters for your A-pillars. Not only will it raise your sound stage, it will improve the clarity immeasurably. I've used cheap ones and mid-priced ones and they are really improved the sound.

I have become a big fan of NVX speakers. They are very good quality, clean sounding and very affordable.

I have these tweets in my car and van:

https://www.sonicelectronix.com/item...NVX-VSPTW.html

These are an excellent 6.5 coaxial:

https://www.sonicelectronix.com/item...NVX-NSP65.html

07-29-2019, 01:40 PM	#1
yaris9876 Drives: yaris hatch 07 640K original m Join Date: Mar 2007 Location: usa Posts: 285	yaris speakers I took out the factory riveted speakers from my 2007 hatch. I ordered some Kenwood replacement 5.25 inch. That is the right size,yes? I dont mind doing mods to install them.

07-29-2019, 02:13 PM	#2
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,740	Umm... No! Put a tape measure to the ones you pulled out. You'll see they are 6.5" 5.25" fit in the rear. __________________

07-29-2019, 10:15 PM	#4
06YarisRS View User's Garage Drives: 06 2ZR Turbo Yaris RS Join Date: Aug 2017 Location: Fredericton, New Brunswick, Canada Posts: 2,384	I highly recommend picking up a set of tweeters for your A-pillars. Not only will it raise your sound stage, it will improve the clarity immeasurably. I've used cheap ones and mid-priced ones and they are really improved the sound. I have become a big fan of NVX speakers. They are very good quality, clean sounding and very affordable. I have these tweets in my car and van: https://www.sonicelectronix.com/item...NVX-VSPTW.html These are an excellent 6.5 coaxial: https://www.sonicelectronix.com/item...NVX-NSP65.html __________________ 2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer https://www.instagram.com/2zr_turbo_yarisrs/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2012 Yaris at SEMA	Jason@SportsCar	Third Gen Yaris General Discussion	5	09-23-2013 03:55 AM
No Rear speakers in the Yaris RS/Vitz?	Islander	In Car Entertainment + Electronics (audio / video / alarm)	17	03-01-2013 09:20 PM
New Yaris race car	Jason@SportsCar	Tracking, Racing, Auto-X Forum	83	11-01-2012 02:32 PM
WTB: stock yaris hatchback rear speakers	Adriaan	Willing to Buy by private party	9	09-21-2011 10:23 AM

07-29-2019, 09:26 PM	#3
yaris9876 Drives: yaris hatch 07 640K original m Join Date: Mar 2007 Location: usa Posts: 285	you can measure different ways. the hole in the Yarisdoor is 6 inches. After doing much research it seems that you can put any speaker in if you figure out how to mount it. The Kenwood 1366s needs a 4.75 hole but the mounting flange extends out past that. THe oem speakers are pathetic. so light and cheaply made. Mine were coated in dust.I am looking for something that 2 way that sounds good under 35$.