Question about switch sizes - Toyota Yaris Forums

ChinoCharles · 03-16-2007, 11:13 AM

So I recently installed a power window kit in my Yar, and I already had the cold cathodes, so I have three switches sitting in three of the holes provided right underneath the parking brake.

Problem is none of them fit the holes. I have one circular switch with a blue LED and two rectangular switches that are too large for the holes they're sitting in... not the cleanest look in the world.

Anyone know where I can find a couple four-prong rocker switches for my windows and one three-prong regular ol' switch for my cathodes that fit those stock slots? How are switches sized and what switch would fit in the Yar?

Any help is greatly appreciated!

*Chris07LB* · 03-16-2007, 12:16 PM

Call sparks, and order up the fog light switch. The printed on fog symbol can be removed easily.

jdubau55 · 03-16-2007, 04:16 PM

Rocker Switches

More Rocker Switches

Switch listing

Enjoy the hunt.

Black Yaris · 03-16-2007, 11:16 PM

I am sure we can find something on summit on Sunday, I will clean ya up

ChinoCharles · 03-16-2007, 11:19 PM

Maybe. I need to know if there is a freeking format to how they label switches by size! What am I looking for, there are a gajillion sizes.

Black Yaris · 03-16-2007, 11:21 PM

I will take a look at it, they are usually sized by the diameter of the base... I will take a look and figure something out...... Oh yeah did you see this ?
http://www.yarisworld.com/forums/showthread.php?t=4364

Violin · 03-17-2007, 09:28 AM

I can tell you that the standard Toyota dash fog light switch won't fit. I could get the part # if that helps you.

ChinoCharles · 03-17-2007, 10:39 AM

I'm just going to take the little pop-out bezel with the switch slots into the store. They may know.

jdubau55 · 03-17-2007, 12:44 PM

Digikey has the measurements in the catalog....Give them a call and tell them what you want and what size and stuff. Digikey rules.

03-16-2007, 11:13 AM	#1
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Question about switch sizes So I recently installed a power window kit in my Yar, and I already had the cold cathodes, so I have three switches sitting in three of the holes provided right underneath the parking brake. Problem is none of them fit the holes. I have one circular switch with a blue LED and two rectangular switches that are too large for the holes they're sitting in... not the cleanest look in the world. Anyone know where I can find a couple four-prong rocker switches for my windows and one three-prong regular ol' switch for my cathodes that fit those stock slots? How are switches sized and what switch would fit in the Yar? Any help is greatly appreciated!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bulb sizes for all Yaris Models	DJ_SpaRky	Cosmetic Modifications (Exterior/Interior)	16	07-22-2009 10:23 PM
When to switch to synthetic oil?	jay	DIY / Maintenance / Service	65	02-15-2007 08:44 PM
Dimmer Switch Question	sroberts	General Yaris / Vitz Discussion	3	10-16-2006 10:51 AM
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q.	fantabulousbaby	Cosmetic Modifications (Exterior/Interior)	22	08-29-2006 01:13 PM
Yaris wheel sizes and XA (ist) wheel sizes	Master	General Yaris / Vitz Discussion	10	04-18-2006 11:38 AM

03-16-2007, 12:16 PM	#2
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Call sparks, and order up the fog light switch. The printed on fog symbol can be removed easily.

03-16-2007, 04:16 PM	#3
jdubau55 Drives: 2007 White Yaris LB 5 Spd. Join Date: Feb 2007 Location: Blacksburg, VA Posts: 451	Rocker Switches More Rocker Switches Switch listing Enjoy the hunt.

03-16-2007, 11:16 PM	#4
Black Yaris der Zeck View User's Garage Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006 Location: Toledo, OH Posts: 5,231	I am sure we can find something on summit on Sunday, I will clean ya up

03-16-2007, 11:19 PM	#5
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Maybe. I need to know if there is a freeking format to how they label switches by size! What am I looking for, there are a gajillion sizes.

03-16-2007, 11:21 PM	#6
Black Yaris der Zeck View User's Garage Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006 Location: Toledo, OH Posts: 5,231	I will take a look at it, they are usually sized by the diameter of the base... I will take a look and figure something out...... Oh yeah did you see this ? http://www.yarisworld.com/forums/showthread.php?t=4364

03-17-2007, 09:28 AM	#7
Violin View User's Garage Drives: 2007 Yaris LB Auto Join Date: Jul 2006 Location: New Jersey Posts: 1,592	I can tell you that the standard Toyota dash fog light switch won't fit. I could get the part # if that helps you.

03-17-2007, 10:39 AM	#8
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	I'm just going to take the little pop-out bezel with the switch slots into the store. They may know.

03-17-2007, 12:44 PM	#9
jdubau55 Drives: 2007 White Yaris LB 5 Spd. Join Date: Feb 2007 Location: Blacksburg, VA Posts: 451	Digikey has the measurements in the catalog....Give them a call and tell them what you want and what size and stuff. Digikey rules.