Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Second Generation Toyota Yaris Main Rooms > Regional Forums > Southeast
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 07-04-2015, 01:08 AM   #1
DataGoddess
 
Drives: 09 Blazing Blue Yaris
Join Date: Jun 2015
Location: Atlanta
Posts: 13
Headlight restoration Atlanta

Does anyone know a good place for headlight restoration in the Atlanta area? I would like to get them done nicely so they stay clear longer than a store kit. Also are there still Yaris meet ups in Atlanta?
DataGoddess is offline   Reply With Quote
Old 07-22-2015, 11:43 AM   #2
_S7V7N_
 
_S7V7N_'s Avatar
 
Drives: Yaris 4 Door Sedan
Join Date: Dec 2008
Location: South Texas
Posts: 805
Send a message via Yahoo to _S7V7N_
Do you have any type of buffer or Orbital?

You'd just need some 1500-2000 grit sandpaper.(wet sand)
Compound
Meguiars PlastiX
Wax.

I do mine about twice a year. Depending how much i drive.
__________________


Audio is under Construction Kenwood KDC-X794
Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch
Hifonics BXi 1210D - Crunch PowerZone P1400.4
(2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3
_S7V7N_ is offline   Reply With Quote
Old 11-13-2015, 07:18 PM   #3
1.5 to go
 
Drives: 2010 yota yaris
Join Date: Nov 2015
Location: forest city n.c.
Posts: 3
toothpaste works super for head lites. john
1.5 to go is offline   Reply With Quote
Old 11-13-2015, 07:21 PM   #4
1.5 to go
 
Drives: 2010 yota yaris
Join Date: Nov 2015
Location: forest city n.c.
Posts: 3
New to yaris doing exterior & interior, than the mods begin. i can't leave anything alone !!lol
1.5 to go is offline   Reply With Quote
Old 11-13-2015, 07:25 PM   #5
1.5 to go
 
Drives: 2010 yota yaris
Join Date: Nov 2015
Location: forest city n.c.
Posts: 3
newbie ? does anyone know on a 2010 yaris if the cat is flow thru or should be gutted ,one site said with the small exhust pipe you shoud use a 2" muffler ? sound right ?
1.5 to go is offline   Reply With Quote
Old 11-13-2015, 10:17 PM   #6
CB900F2
 
Drives: 08 Sedan
Join Date: Oct 2008
Location: Toronto
Posts: 301
Quote:
Originally Posted by DataGoddess View Post
Does anyone know a good place for headlight restoration in the Atlanta area? I would like to get them done nicely so they stay clear longer than a store kit. Also are there still Yaris meet ups in Atlanta?
I had some oxidation on my 2008 headlights, and I tried everything other then sanding, and I came across the following: http://www.ibc34.com/Onestep.html and I did not want to use those sand and polish kits, so I gave Pittman a try, its expensive, but it really work.. and worked well..

I should have taken some before pics, but I will post the after pics...

Something to think about.
CB900F2 is offline   Reply With Quote
Old 11-13-2015, 11:12 PM   #7
tmontague
 
tmontague's Avatar
 
Drives: '08 2zr swapped Vios M/T
Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
If you want it to last then you need to add layers of clear coat (non yellowing, UV resistant) and after about 3 coats wet sand with a 3000 grit sandpaper. Repeat this at least twice a you'll have have have layers of clear coat on the lens that is smooth and non orange peel like. Then you Polish with a regular car Polish so it's no longer cloudy and then use a paint sealer/synthetic wax on top.

This will last you years and years. ChrisFix on you tube has a great video for a DIY on this. He just doesn' show how to wet sand the clearcoat to get rid of the orange peel.

The reason it doesn't last is because people only add wax after they wet sand and no clear coat. Wax is not a strong enough protector to use if you want it to last.
__________________
No one ever wants to give a Yaris the point by...
tmontague is offline   Reply With Quote
Old 09-21-2016, 09:49 AM   #8
snowsquirrel
 
Drives: 2008 Yaris 5dr LB
Join Date: Aug 2016
Location: Waterloo, Ontario
Posts: 48



Further to what "tmontague" mentioned above, I have tried out "ChrisFix" method, I used 600, 1500 & 2000 (selection 'cos that's what I have in my garage) hand wet sanding, clean and degreased with rubbing alcohol before applying Rust-Oleum clear coat. This was done early Sept 2016 on my 2008 5dr LB. I'm rather pleased with the result so far.
Attached Images
  
snowsquirrel is offline   Reply With Quote
Old 03-08-2017, 03:38 PM   #9
JimKellyfan
 
JimKellyfan's Avatar
 
Drives: 2010 Yaris Sedan
Join Date: Oct 2013
Location: the good Carolina
Posts: 173
Lots of places do them.
Toyota and other shops.
If not doing it yourself, save your paperwork as they will get yella again.
(most have a 1, 2 or 3 yr warranty and you will need it)
I have done mine twice now with a small kit.
I also have a dual action sander to make light work of mine and the wifes.
When visiting my son at the half way point (kinda) we went to the Richmond Busch race last fall.
I tested the toothpaste and toothbrush theory and yes, it does work.
Ya need to coat with something though.
I was going to test clear enamel paint next go around just for the heck of it.
See if it lasted longer.
__________________
2010 Yaris sedan, TRD CAT back (sport muffler only, really), OBX header (relocated front AF sensor to front pipe), OBX throttle plate spacer, K&N filter (in stock air box-for now), TRD struts and shocks, Mexico Rough Road Springs x 4, new Yota sway bar links front, slotted/drilled rotors and Maxx brakes front, Valvoline synthetic brake fluid, 3M undercoated, 16" Konig Feathers Michelin Pilot Sport AS 3 + Tires
TRD rear sway bar, 4 GT Spec bars including: front strut brace 2 point, 4 point ladder brace, mid chassis brace and rear lower tie brace, rear hitch, [B]
JimKellyfan is offline   Reply With Quote
Old 03-01-2018, 03:28 PM   #10
hichamaziz
Banned
 
Drives: my car is the best
Join Date: Feb 2018
Location: casablanca
Posts: 21
thank you for sharing
hichamaziz is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing headlight bulbs in under 5 minutes without removing the bumper 07liftback DIY / Maintenance / Service 0 01-23-2015 11:11 AM
DIY Projector/HID (sedan) Brian DIY / Maintenance / Service 145 02-05-2012 04:13 AM
How To Smoked Sedan Headlight -DIY zulhizainL902S DIY / Maintenance / Service 26 01-14-2011 02:12 AM
Glassylite Headlight Restoration Kit TEHxFALLEN V1.2 Photo-Video-Media Gallery 1 07-03-2010 12:51 AM
Headlight Restoration Emerge Wash, Wax, Detailing, Exterior Repairs 23 06-26-2010 12:11 AM


All times are GMT -4. The time now is 08:17 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.